AutoCAD 2010 :: Linework Over Xref PDFs Keep Moving In Model Space Spontaneously
Jul 26, 2013
I'm using Autocad 2010, and have never had this problem before. Working in plan, the traced linework over 2 xref pdfs (both on locked layers) keeps moving in model space either when I'm performing another command on different linework or when I regen. The layers that keep moving are all locked, and do the same when they're frozen. There is no consistency to where they move--usually within the same screen view--so it makes me wonder whether I xrefed these files into a different plane? They're not georeferenced though.
Or is this just a bug? I thought the file may be corrupted so started a new one, still same issue.
View 3 Replies
ADVERTISEMENT
Mar 28, 2012
I have a bit issue with inserting xrefs in model space .Basically, when I insert the xref in model space, the xref shows in an angle.
View 1 Replies
View Related
Jun 12, 2013
I have a model space with a few XREF drawings. I have a layout with a viewport of these drawings. All seemed fine until I imported another drawing using XREF. I went to adjust this viewport and it is not showing the new drawing that has been imported into model space (I can see the three drawings that were there but the new one will not appear) to you have to like "reload" a viewport or something? (From my understanding viewports alwasys stay current with model space)
View 8 Replies
View Related
Dec 5, 2012
How can I convert drawings on paperspace into PDFs and DWFs with the correct scale? I measured everything on paperspace and it's right; but if I convert them to PDFs and DWFs everything srinks a little and the scale doesn't match at all. What settings or ways to match the scale into what it's suppose to be to convert it to PDFs and DWFs?
View 4 Replies
View Related
Sep 10, 2013
I have alot of text oriented in various Layout Viewports. Unfortunately the consultant I am working with failed to mention that his software uses only model space. All of my measurements are orieneted on a Single Layer titled "Noise" in various layouts I was wondering if there was a quick way to take this layer and orient all of this data to model space??
View 5 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
May 2, 2012
determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.
View 4 Replies
View Related
Mar 15, 2012
I have a drawing that has several Paper Space tabs, and each tab has one or more viewports.
When I open the drawing, I can see all the information in Paper Space mode, and I can access the Model Space through the viewports, using the MS command. When I switch to Model Space, nothing is displayed.
View 4 Replies
View Related
Mar 13, 2012
So I just recieved drawings from a contractor and they placed all the multileaders and details on the paper space but when I go to change the model space things are no longer pointing at the right spot.
What I am trying to do is copy them into model space but.... when I use crtl-c from paper, crtl-v to model it doesn't scale properly.
View 1 Replies
View Related
Mar 12, 2012
When I drop a profile into model space, what happens when I move it? Like if I have ten different profiles, I'd like to square them all up and organize them to fit neatly into my plan views. I just scale my border drawing and drop one of those into model space, then fill it up with profiles until it's full.
I know that I should be working in layout/paper space for this kind of stuff, but this seems easy enough.
View 3 Replies
View Related
Aug 2, 2013
I have text in a base dwg next to a c3d s.s. structure table. Looks fine in base dwg. In the plan/profile this is x-ref in the text is on top of c3d table text. visretain is 1, text is not annotative.
View 2 Replies
View Related
Apr 13, 2012
Basically I've got a detail specific to my design, I've extruded all of the layers up to their desired levels etc, but now I want to be able to rotate it all so that instead of these layers being orientated vertically, they are orientated horizontally, if that makes sense. I understand that there is something involved with the UCS but I'm not sure how to get this to work. This may be an issue with my computer as I know my laptop graphics card is pretty rubbish and impacts a lot of 3d programs such as Rhino and SketchUp so this could be the issue here
View 2 Replies
View Related
Feb 2, 2012
When I start AutoCAD with the SDI value on 1 to start a new drawing, everything is going well. But when I start an existing drawing, AutoCad starts twice, the first bare and the second with the required drawing.
View 4 Replies
View Related
Feb 7, 2012
All I want to do is trace on top of an x-ref elevation. The x ref hides all my new lines so I cannot see what I've just drawn. Even the display order has no effect, not that I want to use the display order every time I draw a line. I just want my new black lines to show up on top of the faded xref image.
View 4 Replies
View Related
Mar 20, 2012
ACAD Architecture installed as 32-bit on Win 7 64 bit machines w 12 gig ram. My users are using that g.d. CAP studio program, hence the 32 bit install. SP1 is installed as are hotfixes for Ribbon and Dimension issues.
Here's what's happening: most of the time we have no issues with raster images attached to the files. However, every once and a while one of the images decides to not show up. In XREF manager, everythings fine - the paths to raster images are correct (shared network path). The files are loaded, the insertion layers are on. You can close out of AutoCAD and come back in - sometimes the image pops back in.
Even though these are plot settings, I have RASTERPERCENT set to 80, and Raster Threshold set to 120 (although the size of most of these images is around 100k)
View 2 Replies
View Related
Mar 11, 2013
The normal color scheme for xref'd entites is the color gray. Is there a way to change them so that the linework can be more distinguishable? With everything being gray, it is hard to differentiate between contour lines and feature lines.
View 5 Replies
View Related
Nov 1, 2012
To simply put it, I am grabbing linework from a dwg and copying it from base point 0,0,0. in the drawing that I want to copy it into, I hit ctrl+v and type 0,0,0 to put it exactly where it needs to be.
For some reason, that I cannot figure out, the 0,0,0 point in the two drawings are different...so I have to zoom extents and hunt for it 10,000feet away in model space. But that is not the main problem because I can always find it and move it where it needs to be.
The main problem is that when I move the copied linework over the previous linework that needs updated, it has been rotated like 3 - 4 degrees. That, or my base file's linework has been rotated 3 - 4 degrees - which doesn;t make sense because my base files linework is made up of xref's!
All drawings are set to UCS World.
Is there a way to make the 0,0,0 points the same location in both my base file and all the xrefs? My base file is not completely vertical when the xref dwg is...is there a setting that my base file has for xref's that is rotating them 3 - 4 degrees?
View 1 Replies
View Related
Aug 6, 2012
I have a file thats doing something wierd, when I open it I can see the layouts just fine, the existing viewports show linework from model space. However, when I switch to the model space tab I don't see anything, my mouse cursor dissapears when I move it over the drawing area but reapears when its moved over the ribbon or the prospector/command prompt. Also, when I create a new layout with a new viewport, nothing is displayed in the new viewport. It's like the program cant regen the view? When I went into one of the existing viewports and zoomed out I could see all the linework in model space but when I switch to the model tab it won't show any linework or the UCS indicator or my mouse cursor!?!
View 8 Replies
View Related
Mar 19, 2013
I dont use paper space at all. i mostly work in model. but i just want to explore the paper space side.
I have my lpaperspace dimscale set at 1
In the model space my picture is drawn to scale, so its like 12 feet tall.
when i put the viewport in and get the picture positioned in the viewport, when i dimension the model in the viewport my dims are set according to the paperspace dimscale.
is there a way i set the dimscale in the viewport at a different dimsale then the dimscale set in the paperspace without having to set the dimscale in the model space?
View 4 Replies
View Related
Nov 26, 2013
Multiple layouts in model space suddenly stopped showing boundaries.
View 1 Replies
View Related
Oct 8, 2012
I have a sheet drawing with all my background xref'd into it. How do I rotate the view in model space so it will show appropriately in the sheet view in paper space?
View 1 Replies
View Related
Nov 9, 2013
in general, I add my multileaders in paperspace after I have set my model space scale. However, I am now bound to that scale! That is, ML in paperspace really only have one scale: 1-1, right? For example, I wanted to zoom in to a part of my project (ie, reduced my scale by a 1/3) and all my ML we pointing erroniously into space.
Just so I undestand, if one anticipates changing the scale of a drawing mid-project, the ML should be made annotative, and placed in model space?
View 1 Replies
View Related
Aug 16, 2012
I received a drawing form a vendor that is in 3d (27 meg)...this drawing contains the model and 4 paper space sheets.
These sheets contain different pieces of the 3d model. I need to create four 2d drawings (one for each sheet). I have tried "export layout to model" with no luck as most of the drawing does not export. I have tried to copy to clipboard but, drawing is too large for the clipboard. I have looked in the "help" and there seems to be nothing on converting a 3d drawing to a 2d drawing or extracting indivigual sheets to a 2d format model. I have tried exploding the information on the sheets in order to get everything to export but that doesn"t work.
View 2 Replies
View Related
Aug 22, 2012
Suddenly, this week, Paperspace no longer has a 0,0.
For decades I've inserted my Titleblocks in Paperspace at 0,0.
This week, it inserts it relative to 0,0 in Modelspace in one of the Viewports.
Which means the Titleblock is "Waaay Offf" to quote Rodney Dangerfield.
If I draw a line in Paperspace and start it at 0,0, again, it's the Modelspace 0,0 in a Viewport.
Was this an improvement that I didn't know of?Or did I accidentally change some setting?
View 5 Replies
View Related
Jan 9, 2012
We are running AutoCAD 2011 and 2011LT on Windows 7 with 12gb of ram and a NVIDIA Quadro 4000 video card.
The problem did not happen to often when we were on XP, but now, whenever we're in a command, the screen jumps as if snaps were turned on with 1/2" spacing. We've tried upgrading the drivers and graphics cards as well as installed all updates I could find. We make sure drawings are purged and audited and Layer manager IS NOT kept open.
View 6 Replies
View Related
Feb 7, 2013
Civil sent a sheet and reference file. I need to reference the civil file into my architectural model file. The civil sheet file has a viewport with most of layers and colors properties set the way I need them to appear in my architectural model floor plan. The civil view is using VPLAYER overrides properties. How can I get civil's viewport layer overrides set current in model space of thier file? I can reuse the file as my architectural backgound model file.
View 2 Replies
View Related
Apr 24, 2013
I've picked up someon elses drawings and for some reason in paperspace the ltscale is set to 10. i've tried changing the global scale factor to 1 in the linetype manager but it keeps changing back to 10 when i tab through the different sheets.
i normally have both my ltscale and psltscale set to 1 in paper space (and celtscale=1) and have a custom macro asigned to a button for my modelspace views ie 1.100,20,10 etc and a macro/button setting the ltscale back to 1 when returning to paperspace and this worked nicely.
why the global scale factor keeps reverting back to 10?
View 2 Replies
View Related
Jun 18, 2012
I was working in model space and when I hit zoom extents, I lost all of my drawings in model space. They must be there because I can see them in layout, but I am not able to locate them in model. For some reason my cross hairs and the ability to draft have disappeared too. I am sure I must have hit a setting that needs to be changed back.
View 3 Replies
View Related
Feb 10, 2012
i am haveing trouble with a viewport that is hiding everything that crosses the rectangular border. The viewport is acting just like a wipeout would. I got this drawing from a client and I can't figure out what is wrong with it. I checked to see if there was actually a frame with the viewport but when I select the viewport it only reads as one object.
View 6 Replies
View Related
Dec 4, 2012
I need to change the text line width in model space, not the overall text width or the text line width/weight in paper space. Our mold maker wants to measure that on screen and he wants to set the text line width to 0.060”, while the overall text width fixed.
For example, the text “REMOVE FROM BOAT” is 3” wide total from first letter R to last letter T and height 0.4”. That is easy to do. The hard part is that he wants the line in each letter to be 0.060” (1.5mm) wide. I practiced the true type text which is measurable in model space, but that is fixed with for a certain font with a certain size. I can change from one font to the other and get different thickness but cannot change the width freely to 1.5mm as requested.
View 9 Replies
View Related
Sep 13, 2010
when working in my current drawing (Model Space), i create a new mtext item, and it shows in bold, i am aware of the common problem of the text items having a z height other than 0.00 causing this, but i have checked, and reset the z height, have also tried the flatten command, and even tried explode and then flatten/z height.
View 9 Replies
View Related
