[URL] Bug is where the Hand move (by holding down Space bar and dragging) stops working. Issue appears to be a conflict with web browsers.
This bug is still present in Photoshop version 12.1 (CS 5). I don't use Firefox, I use Safari and Chrome. Quitting Safari did not fix the problem. Quitting Chrome DID fix the problem.
Today, all of a sudden, two of my most used functions—holding down the space bar to move the image around and holding down CMD-space bar to zoom—just up and quit on me (I do like the "Scrubby" but it took a little getting used to. It's very touch screen-esque).
I did all of the normal trouble shooting such as deleting the prefs, relaunching, restarting, etc. Nothing. The functions work fine in the other CS5 programs.
I checked through all of the prefs thinking that perhaps I accidentally changed something but I couldn't find anything. If all else fails, I'll do an uninstall/reinstall but only as a last resort.
I did notice that Adobe finally fixed the Distort (in Full Screen Mode) bug that was killing me in CS4.
I have just got a Laptop with windows 8, and put my Photoshop CS5 on, so far eveything works appart from the space bar hand tool, which I use a lot.Its not working in RAW either.
View 1 Replies View RelatedI am using cs6 with windows 7 professional. The hand tool is not working when using the space bar.
View 2 Replies View RelatedI was having a few issues with shift-constrain resizing not working, and option-drag duplication not working, also using the space bar to move the document around the viewport.
OSX 10.9, InDesign 9.2.1.
I reset the preferences, restarted which failed to solve the problem.However once I updated my Wacom driver from 6.3.3 to the latest 6.3.8-2 that seemed to solve the problem.
My OS is Windows 7 Home Premium, 64 bit & Radeon graphics card. I have been having trouble with my space bar. This is what I've been doing...
New Layer > Ellipse tool > Draw a cirlce > Duplicate Layer > (reselect) Ellipse tool > select the Subtract Front Shape < this is where I need to use the space bar so that I can center the new circle (inside) so that I have a nice border that's evenly spaced around the entire circumference.
However, when I go to hold down the space bar so that I can use my mouse pad to move the circle around it will not move and the hand icon does not appear. The box that contains the H/height & W/width gains the X & Y information. However, intermittently the hand icon will appear but even when it is present I still cannot move anything. When the hand icon does intermittently appear I have not changed anything.
I have checked to make certain that my mouse pad doesn't have any sort of setting(s) that would prevent the mouse pad action when a key is being pressed ~ at least to the best of my rather newbie experience.
I have read that some have had problems with CS5 regarding this same matter but their issue was resolved simply by closing whatever browser they had open concurrently (with Ps). I tried this but it did not resolve my problem.
I had used the Beta of CS6 and it worked just fine which I find rather odd. I reset the preferences by hitting Shift+Alt+Ctrl and that also did not work. Also, if you don't know how I could go about resolving this issue do you know of an other way in which I would be able to move the circle when the Subtract Front Shape is in use? I have tried making the new circle and then just using the Move tool at the top of the tools bar.
CAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies View RelatedWhat is the difference between Adobe RGB(1998) working space, and CIE Lab space?
View 3 Replies View RelatedI have Photoshop CC on a Mac running Mavericks, 16 gb memory. While working on an image, the space bar stopped calling up the hand tool while depressed. I tried quitting Photoshop, no good. I tried restarting computer, it worked, for a little while, then went away again. This a Photoshop issue, and how do I fix it? Or is it a Mac issue?
View 4 Replies View Relatedjust set up a new computer -Vista Ultimate 64 bit and cannot get the spacebar to work as a hand tool in Photoshop.
View 15 Replies View RelatedCS 5.5. Just restarted Photoshop and still the same problem. I should be able to hold down the space bar and grab the screen to drag it around. Not working anymore.
OS X
CS 5.5
I'm on OS X 10.8x and just upgraded to Photoshop CC. I can no longer press Space to toggle the hand tool temporarily.
am I missing something during migration?
I needed to reinstall CS5 and now I can no longer use the spacebar to temporarily get the hand tool. Same problem in Photoshop.
View 4 Replies View RelatedI checked my preferences and OpenGL is enabled, so I don't understand why it randomly stops working when I'm trying to get work done. Been working for less than four hours today and have had to restart Photoshop CS5.5 6 times. It starts working for a little while, then the "Scrubby Zoom" box becomes greyed out and the shortcut doesn't work as well.
Also when I hit space (hand tool) to drag the image around, that stops working at the same time as the zoom. I'm using an Intuos4 with this, haven't had problems with it until recently but there haven't been any significant changes in my machine (PC), which has a nice graphics card, processor, etc. I'm using Google Chrome, maybe it has something to do with my browser being open at the same time as PS?
I cannot even fix it by restarting my Mac, I've also zapped the PRAM on a couple of occasions and still no luck.I've also tried resetting Ps preferences as well as all Ps tools.
I find it very annoying as it is just the way I am used to working and it is therefore slowing me down.I am also getting this same issue in Illustrator
Not only that, but I can no longer use 'space+click' to use the hand tool to move about in my Ps document.It's as if Photoshop (and Ai) is just not taking any notice of these shortcuts… even though my keyboard is not malfunctioning.
when i zoom extents, my dwg gets very small and hids in a corner...as if there is something else on the page way off in space. i've tried to find it but theres nothing visible. everything is thawed/on and there are no wipeout frames. i tried to Erase All...then deselect my drawing...but still nothing.
View 9 Replies View RelatedI need to make a 30 second long zoom in Z space and I'm using a 3D camera for that. I've separated the dimension on the positioning of the camera so I could use only the 'Z position' to make the zoom.
I'm starting the Z positioning from 0 until -700000 (I know, It's kinda far!) But I've noticed that my images (which I've placed in 3D space so they pass the camera in Z space) are getting slower and slower because of the far zoom I quess?
How closer I get to the number -700000 how slower the camera movement is going.
I'm having a problem with Zoom Extent on a poticular drawing. when zooming normally with the scroll wheel it will work with no problems at all.
When I do a Zoom Extents everything in the Model window disapears even the viewcube and small tool bar and minimize and close buttons. but if i go to where the minimzie and close is and click my mouse picks up the command.
If i do a undo i get everything back.
Before Zoom Extents
before ZE.jpg
After Zoom Extents
blank window.jpg
Would this be a system varible or a driver issue. it only seems to do it with this drawing and when this drawing is Xref'ed into another drawing.
I have purged, audit and checked scales. but i'm still getting this problem.
Autocad 2008 has been running smoothly for a long time. This morning on trying to use the programme, working in model space has become almost impossible as the pan and zoom functions have become very slow and move in short distances before a pause and then moves again. I've tried restoring my pc to a previous restore point as I had a windows update last night, but it won't restore. If I access the model through a viewport the pan and zoom functions are normal.
View 3 Replies View RelatedI'm having a difficult time with color profiles.
From what I always understood, the WORKING SPACE color profile affected real-time interpretation of the data on the screen. In other words, no changes to the WORKING SPACE color profile would actually affect the file -- only how it's displayed on your screen (like monitor settings).
Now, my problem is that everything I have printed at the printers comes out a shade darker than I intended it to. This means that my WORKING SPACE color profile is too bright, correct? By simply darkening it to match what I've got on paper, I will have better control over how things come out on the printed page.
Am I understanding what the WORKING SPACE color profile is, so far?
If so, why doesn't anything change when I cycle through them in Color Settings (Shift+Ctrl+K)? Even after showing MORE options, cycling through the dozen (or so) available WORKING SPACE options doesn't do anything to the file I've got open.
Short of darkening my entire desktop via video card or monitor color settings, how do I make documents in Photoshop appear darker, so that what I see on screen matches what gets output to paper?
I like my every day color settings (and brightness levels) just the way they are. The only thing I was to see darker are Photoshop documents, inside Photoshop.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View Relatedafter discovering zones and the space evaluation tool I wonder whether it is possible to customise the XLS output further by also reading out information from a property set attached to the space?
The office standard is to have a property set attached to each space that defines a room number (which is the level ID plus a number, say G-01), the area and the space name.
We used to simply schedule the areas with a schedule table. That only gives us net rooms, no subtotals per department (or say per flat) and no grandtotal.So we got as far as using zones grouping the spaces in each flat.
Now I need an area schedule XLT template that also displays the room number from the space's property set and the schedule grouped in a fashion that I get subtotals per flat (=my zones) in another column and a grandtotal.Playing with the Space evaluation tool I seem to only ever get Room/ zone names and their areas.
I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View Relatedhow do I transfer model space drawing into paper space ?
View 2 Replies View RelatedI'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedI feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedIm working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View RelatedI have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?