Photoshop :: WORKING SPACE
May 12, 2008
I'm having a difficult time with color profiles.
From what I always understood, the WORKING SPACE color profile affected real-time interpretation of the data on the screen. In other words, no changes to the WORKING SPACE color profile would actually affect the file -- only how it's displayed on your screen (like monitor settings).
Now, my problem is that everything I have printed at the printers comes out a shade darker than I intended it to. This means that my WORKING SPACE color profile is too bright, correct? By simply darkening it to match what I've got on paper, I will have better control over how things come out on the printed page.
Am I understanding what the WORKING SPACE color profile is, so far?
If so, why doesn't anything change when I cycle through them in Color Settings (Shift+Ctrl+K)? Even after showing MORE options, cycling through the dozen (or so) available WORKING SPACE options doesn't do anything to the file I've got open.
Short of darkening my entire desktop via video card or monitor color settings, how do I make documents in Photoshop appear darker, so that what I see on screen matches what gets output to paper?
I like my every day color settings (and brightness levels) just the way they are. The only thing I was to see darker are Photoshop documents, inside Photoshop.
View 21 Replies
ADVERTISEMENT
May 15, 2010
Today, all of a sudden, two of my most used functions—holding down the space bar to move the image around and holding down CMD-space bar to zoom—just up and quit on me (I do like the "Scrubby" but it took a little getting used to. It's very touch screen-esque).
I did all of the normal trouble shooting such as deleting the prefs, relaunching, restarting, etc. Nothing. The functions work fine in the other CS5 programs.
I checked through all of the prefs thinking that perhaps I accidentally changed something but I couldn't find anything. If all else fails, I'll do an uninstall/reinstall but only as a last resort.
I did notice that Adobe finally fixed the Distort (in Full Screen Mode) bug that was killing me in CS4.
View 89 Replies
View Related
Apr 4, 2012
[URL] Bug is where the Hand move (by holding down Space bar and dragging) stops working. Issue appears to be a conflict with web browsers.
This bug is still present in Photoshop version 12.1 (CS 5). I don't use Firefox, I use Safari and Chrome. Quitting Safari did not fix the problem. Quitting Chrome DID fix the problem.
View 1 Replies
View Related
Aug 3, 2003
What is the difference between Adobe RGB(1998) working space, and CIE Lab space?
View 3 Replies
View Related
May 28, 2012
My OS is Windows 7 Home Premium, 64 bit & Radeon graphics card. I have been having trouble with my space bar. This is what I've been doing...
New Layer > Ellipse tool > Draw a cirlce > Duplicate Layer > (reselect) Ellipse tool > select the Subtract Front Shape < this is where I need to use the space bar so that I can center the new circle (inside) so that I have a nice border that's evenly spaced around the entire circumference.
However, when I go to hold down the space bar so that I can use my mouse pad to move the circle around it will not move and the hand icon does not appear. The box that contains the H/height & W/width gains the X & Y information. However, intermittently the hand icon will appear but even when it is present I still cannot move anything. When the hand icon does intermittently appear I have not changed anything.
I have checked to make certain that my mouse pad doesn't have any sort of setting(s) that would prevent the mouse pad action when a key is being pressed ~ at least to the best of my rather newbie experience.
I have read that some have had problems with CS5 regarding this same matter but their issue was resolved simply by closing whatever browser they had open concurrently (with Ps). I tried this but it did not resolve my problem.
I had used the Beta of CS6 and it worked just fine which I find rather odd. I reset the preferences by hitting Shift+Alt+Ctrl and that also did not work. Also, if you don't know how I could go about resolving this issue do you know of an other way in which I would be able to move the circle when the Subtract Front Shape is in use? I have tried making the new circle and then just using the Move tool at the top of the tools bar.
View 5 Replies
View Related
Sep 12, 2013
I have just got a Laptop with windows 8, and put my Photoshop CS5 on, so far eveything works appart from the space bar hand tool, which I use a lot.Its not working in RAW either.
View 1 Replies
View Related
Jan 15, 2013
If I initially open a smartobject from ACR into PS CS6 using one color space, eg. sRGB, should it then be possible to click back into ACR and change color space to Adobe RGB ???
This is important to me, since working most of the time in sRGB, batch editing lot's of files (for timelapse-video, hence sRGB), but sometimes it may be nessecary to go back and use Adobe RGB to make a best possible print of one of the stills.
This is not working for me. I thought I should be able to do absolutely non-destructive editing when working with smartobjects from ACR, but this may seem to not be the case.
View 9 Replies
View Related
Oct 10, 2008
I calibrated my monitor and is using sRGB as working space in photoshop cs2.
If I open an adobeRGB tagged photo, photoshop says profile mismatch. If I choose to convert adobeRGB to sRGB, would some colors get clipped by the smaller sRGB space?
Suppose I want my working space to be adobeRGB, what are all the color management related things I need to change, in addition to choosing adobeRGB as the working space in photoshop? Do I need to change the monitor calibration process?
View 2 Replies
View Related
May 22, 2013
If i want to get my files offeset printed so they will be done in CMYK...The word "working space" CMYK confuses me a little i thought printer profiles would be "output space" or something
1. Are the CMYK working space options in photoshop actually printer profiles? eg. U.S Web coated (SWOP) v2
2. I ask the guys who do the offset printing what printer profile they use and that is the one i should select in photoshop.
3. So when I soft proof it uses the CMYK working space and my file is previewed or it mimics what i would look like printed on the paper/ink combination at the printers.
4. All the CMYK working spaces available in photoshop are all ICC compliant?
View 5 Replies
View Related
Dec 9, 2013
How do I shrink the edit working space page in Elements 11 so I can read the info on the bottom? Can't see to choose a crop dimension.
View 2 Replies
View Related
Aug 19, 2013
I've just upgraded from Video Studio X2 to X4, and I've run into a problem. Unlike X2, which still quite happily makes my DVDs for me, X4 however refuses to attempt coding and shows a pop-up which says the following:
"The working folder (C:usersChipsDocumentsCorelVideoStudioPro14.0) may not have enough space. We will clean the converted cache file. You can also change the working folder path in preferences."
Like I said, I tried X2 again and it's working okay. what's wrong with X4 for this to happen and how to correct it?
View 3 Replies
View Related
Jan 1, 2014
I have Photoshop Elements 8 and just recently it changed a bit. When on the active tab (any tab) the background outside my working space is completely black instead it's usual gray. I don't know how it happened but I would like it back to normal. I've attached my screenshot below.
View 2 Replies
View Related
Jan 25, 2012
I downloaded a trial version of PSP X4. When i export an image from ASP in ProPhoto RGB color profile, PSP insist to convert it to sRGB. I wonder what is the color profile that been used by PSP as the working space?
View 9 Replies
View Related
Dec 16, 2012
I have been using Corel Video Studio Pro X4 for a while and never had this problem before. When I try to burn a clip to dvd I get the message:
The working folder C:documents and settingsxxxmy documentscorelvideostudio14.0 may not have enough space. We will clean up the converted cache file. You can also change the working folder in preferences.
The problem is I have already changed the working folder in preferences. When I click on ok to see if it will clean up the converted cache file nothing happens. Why is this coming up when I have the working folder in a different drive with well over 370 gig of space. How do I get this to work again. Another thing I was burning a clip and when it finished it came up with a error and did not work. That is when I tried to re burn the file and got this message. I have tried burning a different file and get the same message. As it is it is useless to me now.
View 1 Replies
View Related
Mar 17, 2011
For some reason, I cannot dimension in paper space. i beleive I have set everything up correctly, but the dimensions in paper space are not correct.
See attachement.
The circle is 12" in diameter, but if the viewport is 1:2 scale, the diminsion in paper space shows 6". what do i need to do to correct this?
View 1 Replies
View Related
Apr 9, 2013
How do you set the default color management / working space to be sRGB for all new projects, instead of reverting to none?
View 5 Replies
View Related
Jan 23, 2012
How to adjust the user interface color (dark to light)? I tried used changing the color working space colors but it didn't seem to make a difference. dark interface hard to read.
View 3 Replies
View Related
Jul 16, 2013
I am not an AutoCad user but I've got an assignment that would go better if I understood a little bit about how interior designers choose colors in AutoCad.I know there are the three tabbed choices - ACI, "True Colors" and Books.My top questions are:
1) does the user choose an RGB "working space" like one would do in Photoshop or Illustrator (in other words, decide if they want to work in sRGB or perhaps Adobe RGB or ProPhoto RGB). Or is there just one possible RGB - in which case, I guess it must be sRGB.
2) is the data for making up the ACI know, so that one can translate ACI colors to their RGB equivalents?
3) I now that with the HSL model you are picking %s of hue, saturation, and lightness....but what is setting the parameters for what is possible here? Is the HSL just a picker that is overlayed on RGB?
View 3 Replies
View Related
Jul 31, 2012
Civil 3d 2012 SP2 - When using "Align Space" from the layout Panel of the Express Tools ribbon, I am not able to align the viewport correctly. It seems to be working backwards. I am trying to orient a viewport to something other than a cardinal direction, but for the sake of clarity, I will use an example using cardinal directions. If I am trying to orient the viewport so that North is at the right side of the page, when prompted for the model space alignment I select a line that goes from south to north in model space. When prompted for the paper space alignment, I select a line that goes from left to right. I would expect that north would end up on the right side, but it is on the left side. When experimenting a little, it seems like it is using the model space alignment as the paper space alignment and the paper space alignment for the model space alignment.
View 9 Replies
View Related
Dec 29, 2012
I am new to Autocad, Everything was working fine until now...I can access a command via command line or menu or toolbar just fine, but although the command line prompts are working, the model space is not showing my lines, circles, rectangles etc. Nothing new is appearing on my model space. I am not sure what I accidentally changed. This is only true in this particular file, my other files are working fine.
View 1 Replies
View Related
Jun 18, 2013
I am using cs6 with windows 7 professional. The hand tool is not working when using the space bar.
View 2 Replies
View Related
Jan 29, 2012
I just downloaded and installed the PSP X4 Ultimate, I'd like to try it before I buy it. When I installed the software, I tried to access"Color Working Space", because I work with Adobe1998 and I wanted to change the work space, but every time I try to access PSP crashes.
View 2 Replies
View Related
Feb 26, 2013
why is it that simple commands in paperspace like editing text/mtext, moving a single line or erasing objects so slow. it seems like it takes way to long to do simple editing. Makes me what to go back to model space sheet set up. I already did the changes to settings that someone posed "NEW Autocad Performance Tips". I notice a small performance enhancement but still very slow compared to paper space. this happened in files with one layout tab or 10.
C3D ver 2012
Win 7, 64bit
View 4 Replies
View Related
Nov 15, 2012
I have teached myself working with autocad version 2004 so maybe its not the right way of drawing but I draw 3D objects using solids!
In the past I could take or put dimensions on this solids to print and pass on to colleagues but on our new 2013 version I seem incapable of doing this I can not select a point on a solid and continuously get the message invalid point!!!
working in 3D modeling space using parametric linear! what am I doing wrong? or is it an setting that I need to change?
View 2 Replies
View Related
Feb 15, 2012
Is it by any chance, possible to make tools as plugins usable in the "normal" working space, not in a new window? Also, adding something like this:
View 8 Replies
View Related
Jun 16, 2013
I installed LR5 from LR4 yesterday and each time I open an image in CS5 from my LR5, I get the following message:
The document "IMG_9082.CR2"has an embedded color profile that does not match the current RGB working space.
Embedded: Adobe RGB (1998)
Working sRGB IEC61966-2.1
What would you like to do?
-Use the embedded profiel (instead of the working space)
-Convert documents's colors to the working space
-Discard the embedded profile (don't color manage)
My camera's settings have it set with sRGB, LR4 and LR5 have sRGB and I have CS5 workspace as sRGB. This did not happen before.
Is it possible that when LR5 updated the LR4 catalogue, it changed the profile of all my photos? I don't know, maybe I've done something, but I can't see what as I don't remember changing anything.
View 1 Replies
View Related
Apr 13, 2014
I was having a few issues with shift-constrain resizing not working, and option-drag duplication not working, also using the space bar to move the document around the viewport.
OSX 10.9, InDesign 9.2.1.
I reset the preferences, restarted which failed to solve the problem.However once I updated my Wacom driver from 6.3.3 to the latest 6.3.8-2 that seemed to solve the problem.
View 1 Replies
View Related
Jan 28, 2013
How do you add a custom working space profile to the profile list in CS6.
View 1 Replies
View Related
Feb 22, 2013
I've just got a new monitor and i have downloaded an ICC profile to use as i don't have calibration hardware yet. I've loaded it in Windows using color management. My question now is what color 'working space' i should set in Photoshop.
I must say that learning about color has been a steep learning curve for me so I have tried to avoid it as much as i can!!! If a total novice guide on color has been covered in another thread just point me there!
View 9 Replies
View Related
Feb 21, 2011
I then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
View 6 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
