Photoshop :: Changing Working Color Space Requires
Oct 10, 2008
I calibrated my monitor and is using sRGB as working space in photoshop cs2.
If I open an adobeRGB tagged photo, photoshop says profile mismatch. If I choose to convert adobeRGB to sRGB, would some colors get clipped by the smaller sRGB space?
Suppose I want my working space to be adobeRGB, what are all the color management related things I need to change, in addition to choosing adobeRGB as the working space in photoshop? Do I need to change the monitor calibration process?
View 2 Replies
ADVERTISEMENT
Jan 15, 2013
If I initially open a smartobject from ACR into PS CS6 using one color space, eg. sRGB, should it then be possible to click back into ACR and change color space to Adobe RGB ???
This is important to me, since working most of the time in sRGB, batch editing lot's of files (for timelapse-video, hence sRGB), but sometimes it may be nessecary to go back and use Adobe RGB to make a best possible print of one of the stills.
This is not working for me. I thought I should be able to do absolutely non-destructive editing when working with smartobjects from ACR, but this may seem to not be the case.
View 9 Replies
View Related
Feb 22, 2013
I've just got a new monitor and i have downloaded an ICC profile to use as i don't have calibration hardware yet. I've loaded it in Windows using color management. My question now is what color 'working space' i should set in Photoshop.
I must say that learning about color has been a steep learning curve for me so I have tried to avoid it as much as i can!!! If a total novice guide on color has been covered in another thread just point me there!
View 9 Replies
View Related
May 8, 2013
Im using cs5 and while editing with brushes the work space color keep flickering on and off and sometime it changes from gray to black.
View 3 Replies
View Related
Jan 23, 2012
How to adjust the user interface color (dark to light)? I tried used changing the color working space colors but it didn't seem to make a difference. dark interface hard to read.
View 3 Replies
View Related
Oct 19, 2012
Accustomed to Element 5. New to 9. How do i change workspace color? I don't like the grey and black backgrounds or headers. All is too dark and it's distracting.
View 2 Replies
View Related
Jan 25, 2012
I downloaded a trial version of PSP X4. When i export an image from ASP in ProPhoto RGB color profile, PSP insist to convert it to sRGB. I wonder what is the color profile that been used by PSP as the working space?
View 9 Replies
View Related
Jan 2, 2014
Any routine for changing color of AutoCAD background in model space. As for changing background color we have to follow four steps namely as follows:-
1. Execute OP
2. Go to display tab
3. Go to color tab
4. Change color
A tool that directly calls the model color shall be highly beneficial.
View 3 Replies
View Related
Jun 19, 2012
The color space on the selected images appears to be changing when I use the Lightroom flash gallery in the web module of LR4.1. This stays the same when the gallery is uploaded. In previous version of LR I have seen color changes in the web module but they have been corrected (and correct) when the gallery is uploaded to the 'net.
I have read that this was (previously) a problem with the flash gallery specifically becuase it was not colour magaded, but I understood that this had been corrected for LR4. As far as my use is concerned it's actually more problematic now than it has been previously.
View 4 Replies
View Related
Jan 29, 2012
I just downloaded and installed the PSP X4 Ultimate, I'd like to try it before I buy it. When I installed the software, I tried to access"Color Working Space", because I work with Adobe1998 and I wanted to change the work space, but every time I try to access PSP crashes.
View 2 Replies
View Related
Jun 16, 2013
I installed LR5 from LR4 yesterday and each time I open an image in CS5 from my LR5, I get the following message:
The document "IMG_9082.CR2"has an embedded color profile that does not match the current RGB working space.
Embedded: Adobe RGB (1998)
Working sRGB IEC61966-2.1
What would you like to do?
-Use the embedded profiel (instead of the working space)
-Convert documents's colors to the working space
-Discard the embedded profile (don't color manage)
My camera's settings have it set with sRGB, LR4 and LR5 have sRGB and I have CS5 workspace as sRGB. This did not happen before.
Is it possible that when LR5 updated the LR4 catalogue, it changed the profile of all my photos? I don't know, maybe I've done something, but I can't see what as I don't remember changing anything.
View 1 Replies
View Related
Sep 19, 2013
I'd like to change a layer's color from command line because of a user icon. I figured out from previous topics that I should use macro similar to this: ^C^C_filedia;0;-la;s;Verdeckt (ISO);c;1;l;dashed;;_filedia;1;re;
(I want to use this macro to change layer's linetype, too, but that's not the point)
The only problem with this macro: layer's name contains a space therefore Autocad tries to recognize Verdeckt as a command (and macro interrupts there) instead of setting Verdeckt (ISO) as the current layer. I've tried using different quote marks, none of them worked (' and " and <>). I hope there's a method for entering a parameter that contains space.
Software: Inventor Series 2011 SP1 x64
OS: Vista Business x64
CPU: E6400
RAM: 2*2Gb GeIL
VGA: Quadro FX 550
View 5 Replies
View Related
Nov 27, 2011
I would like to change the Dark color working area for a lighter one such as grey used in old Paint Shop 6 or 7.
View 2 Replies
View Related
May 29, 2012
The problem I have is I cannot change the brush to pure black; it's only dark gray and normal methods of changing the color aren't working.I went to Brushes, selected one of the Artistic_Ink brushes. (And drew a design)
I tried double clicking on it in the Brushes palette and in the "Art Brush Options" the colorization was already set to Tints. I tried all the other options but the color of the artistic brush is still dark gray; not black.
What else can I do to change the brush to pure black?
View 1 Replies
View Related
Mar 1, 2013
When I export RAW files, specifying that I want the output to be in sRGB color space the resulting files have the Adobe RGB color space. The same is true if I specify I want them in ProPhoto. Is this a bug? I have done it successfully in other versions of Lightroom, but not in 4.3.
View 21 Replies
View Related
Aug 1, 2013
Illustrator CS6 (other users on 5)
Mac OS 10.6
I just need to go from K and tones of K to a spot color and tones of a spot color.
I'm using recolor artwork because I can't merge into K. The art comes in from our customers as K so we can't just design differently.
The rectangles on the right are k and tones of k. The rectangles on the left are the results after converting to a spot color with recolor artwork. Using recolor artwork. I just need a way to accurately move the tones from k to a spot.
View 16 Replies
View Related
May 15, 2010
Today, all of a sudden, two of my most used functions—holding down the space bar to move the image around and holding down CMD-space bar to zoom—just up and quit on me (I do like the "Scrubby" but it took a little getting used to. It's very touch screen-esque).
I did all of the normal trouble shooting such as deleting the prefs, relaunching, restarting, etc. Nothing. The functions work fine in the other CS5 programs.
I checked through all of the prefs thinking that perhaps I accidentally changed something but I couldn't find anything. If all else fails, I'll do an uninstall/reinstall but only as a last resort.
I did notice that Adobe finally fixed the Distort (in Full Screen Mode) bug that was killing me in CS4.
View 89 Replies
View Related
Apr 4, 2012
[URL] Bug is where the Hand move (by holding down Space bar and dragging) stops working. Issue appears to be a conflict with web browsers.
This bug is still present in Photoshop version 12.1 (CS 5). I don't use Firefox, I use Safari and Chrome. Quitting Safari did not fix the problem. Quitting Chrome DID fix the problem.
View 1 Replies
View Related
Aug 3, 2003
What is the difference between Adobe RGB(1998) working space, and CIE Lab space?
View 3 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
Dec 26, 2012
Wile using acad2011...
In model space I set the units form my dwg (cm), draw a line (100units). Next i go to paper space, create a viewport. When the viewport scale is set to 1:1 the ploted line is 100mm in length (not 100cm). Why is this so? How should I correct this? Changing of units in model space does not effect the length of the line in paper space.
View 5 Replies
View Related
Sep 28, 2013
I am having trouble in changing the color of the bullets without changing the text color. Problem is I cannot select/highlight just the bullet so any new color selected applies to the whole line including bullet and text. I am using DP v 7.
View 8 Replies
View Related
May 15, 2012
I've noticed that if I convert the same image to multiple color spaces and apply a 3D LUT with the new Color Lookup adjustment, the result is noticeably different. From experimenting, it seems that the lookup tables operate on whatever RGB value is given to them no matter what color space.
Is there a certain color space these were optimized for? For instance, would a certain color space give me a more authentic 2-strip look than another because of the space they were sampled in? And if I create my own 3D LUTs, would I have to create a separate one for each color space in order to get a consistent look in all spaces?
View 5 Replies
View Related
May 12, 2008
I'm having a difficult time with color profiles.
From what I always understood, the WORKING SPACE color profile affected real-time interpretation of the data on the screen. In other words, no changes to the WORKING SPACE color profile would actually affect the file -- only how it's displayed on your screen (like monitor settings).
Now, my problem is that everything I have printed at the printers comes out a shade darker than I intended it to. This means that my WORKING SPACE color profile is too bright, correct? By simply darkening it to match what I've got on paper, I will have better control over how things come out on the printed page.
Am I understanding what the WORKING SPACE color profile is, so far?
If so, why doesn't anything change when I cycle through them in Color Settings (Shift+Ctrl+K)? Even after showing MORE options, cycling through the dozen (or so) available WORKING SPACE options doesn't do anything to the file I've got open.
Short of darkening my entire desktop via video card or monitor color settings, how do I make documents in Photoshop appear darker, so that what I see on screen matches what gets output to paper?
I like my every day color settings (and brightness levels) just the way they are. The only thing I was to see darker are Photoshop documents, inside Photoshop.
View 21 Replies
View Related
May 28, 2012
My OS is Windows 7 Home Premium, 64 bit & Radeon graphics card. I have been having trouble with my space bar. This is what I've been doing...
New Layer > Ellipse tool > Draw a cirlce > Duplicate Layer > (reselect) Ellipse tool > select the Subtract Front Shape < this is where I need to use the space bar so that I can center the new circle (inside) so that I have a nice border that's evenly spaced around the entire circumference.
However, when I go to hold down the space bar so that I can use my mouse pad to move the circle around it will not move and the hand icon does not appear. The box that contains the H/height & W/width gains the X & Y information. However, intermittently the hand icon will appear but even when it is present I still cannot move anything. When the hand icon does intermittently appear I have not changed anything.
I have checked to make certain that my mouse pad doesn't have any sort of setting(s) that would prevent the mouse pad action when a key is being pressed ~ at least to the best of my rather newbie experience.
I have read that some have had problems with CS5 regarding this same matter but their issue was resolved simply by closing whatever browser they had open concurrently (with Ps). I tried this but it did not resolve my problem.
I had used the Beta of CS6 and it worked just fine which I find rather odd. I reset the preferences by hitting Shift+Alt+Ctrl and that also did not work. Also, if you don't know how I could go about resolving this issue do you know of an other way in which I would be able to move the circle when the Subtract Front Shape is in use? I have tried making the new circle and then just using the Move tool at the top of the tools bar.
View 5 Replies
View Related
Sep 12, 2013
I have just got a Laptop with windows 8, and put my Photoshop CS5 on, so far eveything works appart from the space bar hand tool, which I use a lot.Its not working in RAW either.
View 1 Replies
View Related
Nov 21, 2011
I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
View 6 Replies
View Related
Jun 19, 2012
I'm having a small problem with some drawings that have been sent to me for setting out on site. Basically I have 3 separate sets of drawings from architects and engineers, all of the same building but all using a different co-ordinate system. I know that the engineers is using the correct grid for my setting out but unfortunately I only have it in pdf. so I can't copy and paste layers from the other drawings into it.
Is there a way that I can alter the co-ordinates of the other 2 drawings in model space to shift them to the correct grid system?
View 2 Replies
View Related
May 22, 2013
If i want to get my files offeset printed so they will be done in CMYK...The word "working space" CMYK confuses me a little i thought printer profiles would be "output space" or something
1. Are the CMYK working space options in photoshop actually printer profiles? eg. U.S Web coated (SWOP) v2
2. I ask the guys who do the offset printing what printer profile they use and that is the one i should select in photoshop.
3. So when I soft proof it uses the CMYK working space and my file is previewed or it mimics what i would look like printed on the paper/ink combination at the printers.
4. All the CMYK working spaces available in photoshop are all ICC compliant?
View 5 Replies
View Related
Dec 9, 2013
How do I shrink the edit working space page in Elements 11 so I can read the info on the bottom? Can't see to choose a crop dimension.
View 2 Replies
View Related
Jun 25, 2012
Using Photoshop CS6 on Win7 64bit on a brand new machine with 'more than average' specs, I seem to be unable to use any tool that requires me to hold my left mouse button.
- I can't make selections using any marquee tool
- I can't draw using brushes
- I can't draw shapes (I immediately get the 'Create rectangle' popup, as if I released my mouse button)
- etc
Furthermore, I can't reverse the zoom direction by holding Alt.I've reset my preferences to the factory default by deleting Adobe Photoshop X64 CS6 Prefs.psp from the user settings, this does not seem to solve the problem.
There is an exception to the above; sometimes (not always) I can selections on a fresh start of Photoshop. This ability is lost as soon as I use any other tool. it doesn't seem as if another application 'steals focus', as I can always select other tools by using their shortcuts; that would not be possible if PS wouldn't have focus.
View 5 Replies
View Related
