Photoshop :: CS5 / Work Space Color Keep Changing?
May 8, 2013Im using cs5 and while editing with brushes the work space color keep flickering on and off and sometime it changes from gray to black.
View 3 Replies
ADVERTISEMENT
Photoshop Elements :: Changing Work Space Color
Oct 19, 2012Accustomed to Element 5. New to 9. How do i change workspace color? I don't like the grey and black backgrounds or headers. All is too dark and it's distracting.
View 2 Replies View RelatedPhotoshop :: How To Change The Work Space To A Color
May 9, 2012How do I change the work space to a color so my computer screen won't show through Submit question ?
View 3 Replies View RelatedPhotoshop :: CS6 Smartobject - Changing Color Space Not Working
Jan 15, 2013If I initially open a smartobject from ACR into PS CS6 using one color space, eg. sRGB, should it then be possible to click back into ACR and change color space to Adobe RGB ???
This is important to me, since working most of the time in sRGB, batch editing lot's of files (for timelapse-video, hence sRGB), but sometimes it may be nessecary to go back and use Adobe RGB to make a best possible print of one of the stills.
This is not working for me. I thought I should be able to do absolutely non-destructive editing when working with smartobjects from ACR, but this may seem to not be the case.
Photoshop :: Changing Working Color Space Requires
Oct 10, 2008I calibrated my monitor and is using sRGB as working space in photoshop cs2.
If I open an adobeRGB tagged photo, photoshop says profile mismatch. If I choose to convert adobeRGB to sRGB, would some colors get clipped by the smaller sRGB space?
Suppose I want my working space to be adobeRGB, what are all the color management related things I need to change, in addition to choosing adobeRGB as the working space in photoshop? Do I need to change the monitor calibration process?
AutoCAD Visual LISP / AutoLISP :: Changing Color Of Background In Model Space
Jan 2, 2014Any routine for changing color of AutoCAD background in model space. As for changing background color we have to follow four steps namely as follows:-
1. Execute OP
2. Go to display tab
3. Go to color tab
4. Change color
A tool that directly calls the model color shall be highly beneficial.
Lightroom :: 4 Flash Web Gallery - Color Space On Selected Images Appears To Be Changing
Jun 19, 2012The color space on the selected images appears to be changing when I use the Lightroom flash gallery in the web module of LR4.1. This stays the same when the gallery is uploaded. In previous version of LR I have seen color changes in the web module but they have been corrected (and correct) when the gallery is uploaded to the 'net.
I have read that this was (previously) a problem with the flash gallery specifically becuase it was not colour magaded, but I understood that this had been corrected for LR4. As far as my use is concerned it's actually more problematic now than it has been previously.
CorelDRAW Graphics Suite X6 :: Changing Fill Color Doesn't Work
Aug 19, 2013I dobbleclick on fill-color icon in lower right side of the screen to change the fill-color. But no dialog-box appear. But if I try to click anywhere in Corel after this I just get a beep. Looks like there is a dialog-box outside screen or something.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Using Macro Parameter Contains Space (changing Layer Color From Command Line)
Sep 19, 2013I'd like to change a layer's color from command line because of a user icon. I figured out from previous topics that I should use macro similar to this: ^C^C_filedia;0;-la;s;Verdeckt (ISO);c;1;l;dashed;;_filedia;1;re;
(I want to use this macro to change layer's linetype, too, but that's not the point)
The only problem with this macro: layer's name contains a space therefore Autocad tries to recognize Verdeckt as a command (and macro interrupts there) instead of setting Verdeckt (ISO) as the current layer. I've tried using different quote marks, none of them worked (' and " and <>). I hope there's a method for entering a parameter that contains space.
Software: Inventor Series 2011 SP1 x64
OS: Vista Business x64
CPU: E6400
RAM: 2*2Gb GeIL
VGA: Quadro FX 550
Lightroom :: Output In SRGB Color Space The Resulting Files Have Adobe RGB Color Space
Mar 1, 2013When I export RAW files, specifying that I want the output to be in sRGB color space the resulting files have the Adobe RGB color space. The same is true if I specify I want them in ProPhoto. Is this a bug? I have done it successfully in other versions of Lightroom, but not in 4.3.
View 21 Replies View RelatedAutoCAD 2010 :: Changing Between Model Space To Paper Space Locks Application
Apr 12, 2013In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
AutoCad :: Changing Of Units In Model Space Does Not Affect Length Of Line In Paper Space
Dec 26, 2012Wile using acad2011...
In model space I set the units form my dwg (cm), draw a line (100units). Next i go to paper space, create a viewport. When the viewport scale is set to 1:1 the ploted line is 100mm in length (not 100cm). Why is this so? How should I correct this? Changing of units in model space does not effect the length of the line in paper space.
AutoCAD Architecture :: Dimensions Show On Model Space Not On Work Space
Apr 5, 2013Im working on a student version of Architectural CAD 2012 i drew a floor plan and used AEC Dimensions on my model space but when i switch over to work space they don't show up. I tried matching properties and switching between paper and model but so far no luck.
View 2 Replies View RelatedXara :: Changing Color Of Bullets Without Changing Text Color
Sep 28, 2013I am having trouble in changing the color of the bullets without changing the text color. Problem is I cannot select/highlight just the bullet so any new color selected applies to the whole line including bullet and text. I am using DP v 7.
View 8 Replies View RelatedPhotoshop :: Can't Find Work Space In CS4
Jun 18, 2012when I open my work it opens, I can see the layers on the side, but I can't see the work space
View 3 Replies View RelatedPhotoshop :: CS6 Work Space Flashes
Mar 3, 2013I using a trial version of CS 6 on windows 8 pro. I keep getting flashing in the work space / background when I zoom or move an image around (only some images not all). When I zoom or move an image around the background changes from transparent to various shades of gray to black. I was getting it with selections but after making some changes in Catalyst I fixed it. I have the latest driver for my card. I won't purchase it until this issue is resolved. I see many others have the same issue. It's been a long time since CS6 came out and I'm concerned this won't be fixed. I can just continue to use an older version if need be. I don't want to have to buy another video card just to use PS CS6 properly. If I turn off "Use Graphics Card" it seems fine.This card works fine with other versions so what had changed. At $700 I expect to be able to use it with my video card (AMD Radeon HD 6450) which is not too old.
View 1 Replies View RelatedPhotoshop :: Work Space Default ..
Jan 3, 2009I'm an illustrator and only really just started using Photoshop for anything past basic colouring because I usually prefer vector lines and only just brought a tablet.
When I start a new picture in photoshop it's always the same set up for it, 1500x1000 and 150 dpi, It's a good middle ground for me and the workspace is always easily expandable. That's all fine.
Photoshop :: What Color Space Are Color Lookup Presets
May 15, 2012I've noticed that if I convert the same image to multiple color spaces and apply a 3D LUT with the new Color Lookup adjustment, the result is noticeably different. From experimenting, it seems that the lookup tables operate on whatever RGB value is given to them no matter what color space.
Is there a certain color space these were optimized for? For instance, would a certain color space give me a more authentic 2-strip look than another because of the space they were sampled in? And if I create my own 3D LUTs, would I have to create a separate one for each color space in order to get a consistent look in all spaces?
Photoshop :: Color Management - What Color Working Space Should Be Set
Feb 22, 2013I've just got a new monitor and i have downloaded an ICC profile to use as i don't have calibration hardware yet. I've loaded it in Windows using color management. My question now is what color 'working space' i should set in Photoshop.
I must say that learning about color has been a steep learning curve for me so I have tried to avoid it as much as i can!!! If a total novice guide on color has been covered in another thread just point me there!
Photoshop :: Image Doesn't Appear In Work Space
Nov 27, 2013When I open an Image in Photoshop CC the image does not appear in my work space. The tab identifies that the image is opened, layers shows the image is open, however it is not on the screen. All tools, brushes etc work, but I can't see what they are doing. I can only see the image if i click the tab and move it around. Once my mouse lets go of the image window it dissapears again. After moving it around and such it gets buggy and the image crashes not Photoshop. i have attached two screen shots of my problem. the second with the image, i have my mouse clicked, held down holding onto the window to acheive this.
View 1 Replies View RelatedPhotoshop :: CS3 Space Bar Won't Work As Hand Tool
Apr 7, 2008just set up a new computer -Vista Ultimate 64 bit and cannot get the spacebar to work as a hand tool in Photoshop.
View 15 Replies View RelatedPhotoshop :: How To Increase The Work Space Larger Without Enlarging The Whole Image
May 1, 2005How can I increase my work space (the photoshop file open) ? I've tried Image > Image Size but when height or width is changed, the whole picture is enlarged to fit into the new size.
I would like to keep the image and simply add 200px to the bottom of the file, is this possible?
Photoshop :: How To Fix Color Picker To Work Across Different Color-managed Monitors
Apr 17, 2013I'm assuming this problem I'm having stems from having color-calibrated monitors, but let me know if I'm wrong!
To preface, this is the setup I have:
Windows 73 monitors as follows, all have individual color profiles calibrated using the Spyder 3Cintiq 12WX Dell U2410Dell 2409WFPPhotoshop CS6 - Proofed with Monitor RGB, and tested with color-managed and non-color-managed documents . I usually do most of my work on the Cintiq 12WX, but pull the Photoshop window to my main monitor to do large previews and some corrections. I noticed that the color picker wouldn't pick colors consistently depending on the monitor the Photoshop window is on.
Here are some video examples:
This is how the color picker works on my Dell U2410:
[URL]........
This is how it works on my Cintiq 12WX:
[URL].........
Main Question
I know the Cintiq's video capture makes the picture look more saturated than the Dell's, but it actually looks fine physically, which is okay. But notice how the Cintiq's colour picker doesn't pick a matching colour. It was actually happening the opposite way for a while (Dell was off, Cintiq was fine), but it magically swapped while I was trying to figure out what was going on.
Semi-related Question regarding Color Management
Color management has always been the elephant-in-the-room for me when I first tried to calibrate my monitors with a Spyder colourimeter years ago. My monitors looked great, but Photoshop's colors became unpredictable and I decided to abandon the idea of calibrating my monitors for years until recently. I decided to give it another chance and follow some tutorials and articles in an attempt to keep my colors consistent across Photoshop and web browsers, at least. I've been proofing against monitor color and exporting for web without an attached profile to keep pictures looking good on web browsers. However, pictures exported as such will look horrible when uploaded to Facebook. Uploading pictures with an attached color profile makes it look good on Facebook. This has forced me to export 2 versions of a picture, one with an attached color profile and one without, each time I want to share it across different platform. Is there no way to fix this issue?
Pictures viewed in Windows Photo Viewer are also off-color, but I think that's because it's not color managed... but that's a lesser concern.
Photoshop :: Color Doesn't Work - Fill Sun With Proper Color (red)?
Aug 5, 2013I took a photo of the sunrise. The sun was very "red" from forest fire smoke. But when I looked at the photo later the sun had lost its "red" (due to the brightness of the sun). restore the sun color as I saw it?
Below is the photo I want changed and the next photo (not mine) is approx. the color I saw the sun as (perhaps a little redder). I want "my" sun filled with that color.
Paint Shop Pro :: Color Profile To Match LR Export Color Space
Nov 21, 2011I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
Photoshop Elements :: Changing Colors Of Work Area
Mar 31, 2013I upgraded to elements 11, and am having a great deal of difficulty seeing the icons, with the 3 different colors of gray and light blue icons.it is all running together and taking a long time to find things. PSE9 did not have this issue. I was able to change the background area only.can we custom the colors, or is their a app that will let us.
View 2 Replies View RelatedAutoCad :: Changing Coordinates Within Model Space
Jun 19, 2012I'm having a small problem with some drawings that have been sent to me for setting out on site. Basically I have 3 separate sets of drawings from architects and engineers, all of the same building but all using a different co-ordinate system. I know that the engineers is using the correct grid for my setting out but unfortunately I only have it in pdf. so I can't copy and paste layers from the other drawings into it.
Is there a way that I can alter the co-ordinates of the other 2 drawings in model space to shift them to the correct grid system?
Paint Shop Pro :: Changing Working Space Colors
Jan 23, 2012How to adjust the user interface color (dark to light)? I tried used changing the color working space colors but it didn't seem to make a difference. dark interface hard to read.
View 3 Replies View RelatedAutoCAD 2010 :: Dimensions Keep Changing In Paper Space
May 10, 2013I am on ACAD 2012 overlaying dimensions in paperspace to objects in model space..The dimensions keep changing to an incorrect number..Can't identify when it is happening yet. The dimensions are always larger
If I change dim style and back again the correct dimension appears. I can then matchprop to get the other dimensions to appear correctly. But twenty minutes later they are all changed again
I turned of Annotative scale for dimension features and use overall scale of 1.
AutoCAD Inventor :: Space Navigator Keeps Changing Button Settings
Jan 10, 2014Since I installed the 2014 Inventor, my 3Dconnexion Space Navigator refuses to keep the settings I program for the buttons. I tried updating to the latest version of the driver, but that didn't work. I also tried unchecking the autosave function in the driver, but they still get changed anyway and then the driver asks if I want to save the changes.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
AutoCAD LT :: Changing Plot Scale In Model And / Or Paper Space?
Feb 23, 2012I'm using 2004lt- I have current .dwg in modelspace and set up to plot in PS@ 3/23"-1'-0". I'd like to create a second set of PS tabs to plot portions at 1/4"-1'-0" on the same border when needed.
In its a single viewport in MS and PS the current scale is 1:1 but if i change it to 1/4"-1',etc the plot preview appears wrong