Photoshop :: CS6 Extended Spontaneously Disables 3D Feature
Dec 19, 2012
I subscribe to Creative Cloud and while Ai has proven to be exceedingly crashy, Ps CS6 Ext et al, have performed quite nicely..I was working yesterday with Ps, Ai, Id, and Br, all at once, going back and forth from one app to the other (working on an art book) without any problems at all.
All of a sudden, the next day I get the following alert when launching Ps CS6 Ext: What the heck hardware could it be referring to since I have not installed or uninstalled anything at all! My graphics card appears to have more than sufficient memory, as shown below, and do not experience any problems with 3D functions in any other app.I downloaded the latest version of the graphics driver as suggested in the alert but to no avail; .
what could be causing all of my add-ins to spontaneously unload themselves? For the second time in a week, I opened Inventor to have all of my add ins unloaded, and the "Load at Startup" and "Loaded/Unloaded" checkboxes are unchecked. I am not doing this and I am the only user on this machine. System stats and version below.
When I start AutoCAD with the SDI value on 1 to start a new drawing, everything is going well. But when I start an existing drawing, AutoCad starts twice, the first bare and the second with the required drawing.
ACAD Architecture installed as 32-bit on Win 7 64 bit machines w 12 gig ram. My users are using that g.d. CAP studio program, hence the 32 bit install. SP1 is installed as are hotfixes for Ribbon and Dimension issues.
Here's what's happening: most of the time we have no issues with raster images attached to the files. However, every once and a while one of the images decides to not show up. In XREF manager, everythings fine - the paths to raster images are correct (shared network path). The files are loaded, the insertion layers are on. You can close out of AutoCAD and come back in - sometimes the image pops back in.
Even though these are plot settings, I have RASTERPERCENT set to 80, and Raster Threshold set to 120 (although the size of most of these images is around 100k)
I set up my file. I set my controls to where I want them. The Control Curves are in position. I save. Everything is going well.When I reopen the file, control curves have spontaneously moved. Without permission.I've done several experiments with different results, but the same problem: the control curve of my rig are moved from where I had them when I saved the file.
I'm using Mac OS X 10.7.2 on an Intel Core 2 Duo IMac. A few months ago I downloaded PhotoShop 5.1 after having used every previous issue of PhotoShop without a problem.
1. Often when I have Photoshop open on my desktop but not actively using it, it will freeze and I'll have to force quit and restart. When I installed the latest version of InDesign and Illustrator they would also freeze when not in use, however removing and resinstalling them seemed to fix the problem for them, but not for Photoshop.
2.I will be working along on a project when suddenly all of the alphanumerical keys on my keypad won't work. I ultimately have to restart the Mac to get them to work again in any program. This never happens with any other program and I have tried othe keypads, even one just out of the box, and it's always the same.
I have removed and reinstalled Photoshop twice, but still the same issues.I have called the Adobe helpline and tried all of their fixes, but it still happens. They resolved that it must be my Mac. But Mac says because it is related to a specific software it is not their problem.
I'm using Autocad 2010, and have never had this problem before. Working in plan, the traced linework over 2 xref pdfs (both on locked layers) keeps moving in model space either when I'm performing another command on different linework or when I regen. The layers that keep moving are all locked, and do the same when they're frozen. There is no consistency to where they move--usually within the same screen view--so it makes me wonder whether I xrefed these files into a different plane? They're not georeferenced though.
Or is this just a bug? I thought the file may be corrupted so started a new one, still same issue.
Been using CS6 PS since Beta. No problems till 13.1.1 came out. I'm in Full Screen Mode 95% of the time and 100% when I'm retouching.After the most recent update OpenGL funtions will become disabled when I go to Full Screen Mode. This is very annoying! My MBP is connected to a 30in Dell Ultra.
Here is my System Info
Adobe Photoshop Version: 13.1.1 (13.1.1 20121213.r.223 2012/12/13:23:00:00) x64 Operating System: Mac OS 10.8.2 System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading Physical processor count: 4 Logical processor count: 8 Processor speed: 2300 MHz
I'm working on an iMac, OSX (10.7.4) with CS5.1. Ever since I uploaded my new Photoshop program months ago, it disables the alphanumeric keys on my key pad when I use the clone stamp tool. I have to restart my computer in order for my keyboard to work again.
I have talked to Adobe service multiple times, had the software replaced, had a service agent work with my machine from a distance, discussed the problem with Apple (they say it's an Adobe issue), paid a professional to resolve it, reinstalled the software multiple times and ways, worked in safe mode, worked as another user, but the problem persists.
I am a full-time graphic designer with my own business and usually have Illustrator, InDesign and Photoshop all open at the same time, so when I have to restart it is a major problem that I encounter multiple times during my work day.
I wish I had never purchased the upgrade and now fear CS6. What can I do?
i've just started using photoshop CS4 and noticed today that enabling OpenGL drawing under performance preferences (GPU settings) disables color management for my 2nd dual monitor.
2.4ghz intel core 2 duo, 4GB 667mhz, mac os 10.5.6 (fully updated 1/7/09) GeForce 8600M GT, 256MB
This is on a completely fresh installation of windows 7 x64.Before installing Adobe Creative Suite 5.5 Master Collection x64 autoplay for my camera works, after installation it does not work. If I uninstall it, it works again.Where is this program disabling autorun for devices. Autorun for flash drives works fine, its just the non-volume devices that are affected.
I tried using gpedit and reg keys to re-enable autoplay for the camera but it does not work.When I plug my camera in, I can still go to my computer I can get my pics without any issues, its just that this is bugging me.Don't think there is an answer out there, guess I just need to not be so OCD with this stuff.
Currently I am running PhotoShop extended CS5, 64bit. in which i have my fovorite plugins (Topaz, Nik and OneOne) running perfectly.
I have upgraded to Adobe Creative Cloud and installed PhotoShop extended CS6 using Adobe Application Manager as recommended. It didn't ask me if I wanted to upgrade or do a new install for PhotoShop. So now I CS6 running with no Plug-ins. I need my plugins! LOL.
I tried pointing to additional plugins in the CS6 preference to the CS5 plugin folder. Upon Launch it gave me a whole slew of error messages saying something cant load or launch C+ runtime error or what not. It does open up, but it only gives access to Nik and Topaz. OnOne doesn't show up under filters or extensions.
So, what are my options?
Just copy the plugins from CS5 to CS6?
I dont't want to reinstall all the plugins to CS6 if I don't have to as I've auto updated them over time to current versions online, so only have installation files for my original purchases.
I like to use the sharpen feature and the unsharp mask feature but haven't gotten very good at it. Mostly I'm wondering if there is a way to calibrate the sharpen function so that it doesn't sharpen quite so much each time I click it.
I just loaded 2008. With cleanscreen on, the close "X" button is grayed out and inop. Also, the minimize button which is still operable does not fully minimize AutoCAD. How can I get these buttons operable in cleanscreen mode?
I'm using Lightroom 5 and Photoshop CS5. The problem is that if I apply a custom camera color profile created by X-Rite Passport Color Checker, I can no longer use an external editor, such as Photoshop, to edit my photos. Before I apply the custom profile, the external editor function works just fine. If I apply a custom profile in the Camera Calibration panel, then the ability to use external editors no longer works. There is no error message, but nothing happens when I try to edit in an external editor. If I go back and turn off the custom profile and go back to Adobe Standard, then the external editor function works again. What is going on? Is there a way to make it possible to apply a custom profile in Camera Calibration and still be able to use the external editors?
sometimes when using constraints the "movable" part is fixed after adding the first constraint.
If i use i.e. a surface to surface constraint the movable part should be free to slide on the surface.
To move the part in this case I have to add further constraint or delete the old one.
Furthermore sometimes constraints in assemblys do not update automatically. I have to click on the part and try to move it away. After releasing the part the consraint will be updated.
Are there any options to control or better change this behavior?
I have a website banner made in edge with links to other pages of the site. The banner itself is within an iframe (Generally I avoid iframes but I had no option with this one). If you click a link, it will take you to the right page. However if you click the browser's back button, the original page begins to load but quickly redirects you forward again, thus virtually removing the back buttons functionality. However if I click "back" a second time, it works.
Another peculiar thing is that when the page loads, the contents of the page that I am navigating to start to load within the iframe before it redirects. I tried adding "_parent" as a target attribute to all my links but the problem remains. Does edge automatically detect iframe usage and assign link targets to the _parent frame with jQuery?
I have create a small Edge Animate animation that I'm trying to add to our home page. After getting everything running and working properly in IE9+, Chrome, Firefox and Safari I moved it from the development environment to our live site. Then I viewed it on an older machine running IE8 and the down level stage worked great, but it disabled a jquery image slider and a little custom jquery script I wrote to polite load an embedded youtube video. The only cusomization I did to the edge files was to remove the loader for the included version of JQuery so that it would run the on I call from Google instead. This prevent intial conflicts between already existing jquery elements on the page.
I've only recently begun having this problem, less than a week ago.Having used CS3, and having had CS4 for a while, I've been continually using it, bot now, it turns on my spacebar and sticks it in the "ON" position. Closing Photoshop doesn't help, as the spacebar is continually stuck on.
Nothing is new, tablet's the same, keyboard's the same, have had all hardware + software components for roughly the same amount of time, but it's only begun acting like this now. Just as an example, when I mean the spacebar is stuck on,
I mean that everything typed looks like "            t h  i s    " and the spacebar is simply just autopressed, but it's not a physical problem on my keyboard, and ONLY occurs when I open up Photoshop; no text-box is safe, nor any menu; in fact, because the spacebar is 'on', I don't even bother to open an internet window, as it of course, automatically scrolls down to the bottom of the pages.Restarting the computer fixes the problem, until I want to do anything in Photoshop again. ;c Suggestions/fixes?
I am the only one using C3D 2012 in our office and the other users are complaining that they cannot insert blocks or paste clipboard content into drawings that I have saved from C3D 2012. This is true whether I use "C3D as AutoCAD" or the full C3D functionality. I understand that the newer C3D objects are not compatible with the older version but to my knowledge there are no C3D objects included in the drawings in question.
C3D 2009 users can wblock the drawing contents from the Model tab and each Layout tab, and reassemble those parts. Then they are able to insert blocks and paste content again. It is a very inconvenient solution and we only use it when the situation is critical. It also breaks sheet view linkage to our Sheet Sets when we do the wblock fix.
I've asked the others to try using Design Center or Windows paste (CTRL+V) and see if that works the next time they encounter the problem. I don't have C3D 2009 installed or I would have tested these ideas already. The others will not install C3D 2012 and so far the owner's will not force them to.
I'm happy with the NX version, but if I want to upgrade to XT, how do I do it? I looked on the upgrade options for XT and upgrading from NX, is not there.
I have been working with some GIS data in the form of SHP files in autocad map 3D 2011. On one of my layers I have started getting "Feature was not saved in the target feature source" when I try to check in my data. In total there are 308 errors in the data table, all of which were features I deleted. They all have a featID of null and I cannot remove them from the data table. I need to fix these errors without going back and starting over.
I am running Autodesk Map3D 2012 and I need to label my feature points no matter if they overlap or not.The Map3D documention refers to a check box that will allow what I believe I need- but I cannot find the checkbox in the style editor. Here's a clip from the Autocad documentation:
To allow labels to obscure points on the selected layer..In the Display Manager , select the point layer. Click the Style button.In the Style Editor, click Allow Other Labels To Obscure Feature Symbols On This Layer.
It appears that the Layer Filters functionality is broken again with 2013. Unchecking the "Apply layer filter to layer toolbar" disables the function of layer filters in the tool palette.
I recently purchased a new computer and had my Photoshop CS3 extended activated in the new machine. I have successfully used the product for 5 years. Had to move to to new computers twice. This time was different. Now my S3 does not recognise my RAW images taken with Olympus E series cameras.
I have Photoshop CS2, and it's incompatible with Vista on my laptop. At this point I'm going to buy some version of Photoshop CS4. So here are my questions:
What's the difference between Photoshop CS4 and Photoshop CS4 Extended? The extended version Student Edition is significantly cheaper.
Should I just buy the regular Photoshop CS4 Upgrade or is the student/education edition of Photoshop CS4 cheaper?
I recently downloaded the trial version of CS4 which only offered the option of trialling the Extended version NOT the basic version. Subsequent to that I have purchased CS4 and of course, as expected, CS4 Extended does not recognise the serial number. I had thought that by entering a valid serial number for CS4 that some of the features of the trial Extended version would be deactivated but this appears not to be the case. Does this mean I have to uninstall the Extended version and then install CS4 from the CD or will simply running and installing CS4 from the CD overwrite the Extended version?
