i've just started using photoshop CS4 and noticed today that enabling OpenGL drawing under performance preferences (GPU settings) disables color management for my 2nd dual monitor.
2.4ghz intel core 2 duo, 4GB 667mhz, mac os 10.5.6 (fully updated 1/7/09)
GeForce 8600M GT, 256MB
photoshop cs4
I installed CS4 on my Windows XP system. I immediately updated all the components to the latest versions. When I tried to run CS4, I got repeated error messages about GPU problems. When I tried to open Preferences, CS4 crashed, but only on the General and Performance tabs. I called tech support and they suggested getting the latest drivers for my video card. I did that (for one of my two video cards) and now I can run CS4, but no OpenGL.
Here's my system:
Antec P182 case
PC Power & Cooling S61EPS 610W Power Supply
ASUS P5E motherboard
Intel Q9450 2.66 Ghz CPU
Zalman 9700 CPU cooler
Mushkin 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) RAM
Visiontek Radeon HD3850 512M video card (primary) PCIe
Sapphire Radeon 9250 256M video card (secondary) PCI
HP LP2065 monitors (2)
Western Digital WD6400AAKS 640GB hard drives (3)
Samsung SH-S223F DVD burner
Windows XP Home
I was able to update the video driver for the Radeon 3850 card, but there is nothing new for the Radeon 9250 card. With the newer Radeon 3850 driver, I can now run CS4, but in Preferences > Performance, the GPU setting is now grayed out for Enable OpenGL Drawing and it says "No GPU options available with Photoshop Standard."
When I remove the Radeon 9250 card and just use the Radeon 3850 card, the Enable OpenGL option is there and CS4 runs with it enabled. I conclude from this that the Radeon 9250 card and its driver don't support what CS4 needs, but the Radeon 3850 card and driver do.
I use two video cards because I use Colorvision Spyder3 Elite to calibrate and profile my two monitors, and it is my understanding that I need two cards to separately profile each monitor.
Questions:
1) What features in CS4 am I missing by running it with OpenGL Drawing disabled? CS4 seems to work similarly to CS3 when I edit an image, so maybe I don't need OpenGL... just wondering what OpenGL would give me.
2) Can someone recommend a video card that will run CS4 with OpenGL ... AND ... that will allow dual monitors to each be profiled separately? Or, perhaps I can simply replace the Radeon 9250 PCI card with a newer card that supports OpenGL. Suggestions?
3) I do not have the latest BIOS for my motherboard. Would updating the BIOS help with the OpenGL issue, or is this just a video card/driver issue? My system runs perfectly so I hesitate to update the BIOS -- if it ain't broke, don't fix it.
IThis was pulled from the Mac forum (URl....), however I am having the exact same problem on a PC running CS5.
When I "let go" of the "work area" window on the LCD monitor it rather visibly changes the color tonality (so much so that white turns yellow). When I release the image, why is Photoshop altering the color space - when other programs display evenly across the monitors? Am I to assume that releasing the image triggers the second monitors profile? Maybe I simply need to use the same profile for both monitors (which would be strange because this was a problem before I assigned any, and is still a problem after running calibration)?
I've been using Photoshop for years and never encountered this before, however this is the first time I've added a LCD monitor into the mix, as my old Viewsonic finally died. I will be replacing the other monitor with a LCD in the near future, it will be interesting to see if the problem magically resolves (assuming I can't figure it out in the meantime)
It would have made more sense to simply be able to flag a post as pertaining to both operating systems, and thereby have it appear in both threads. That way you're not burdening everyone with threads that do not apply, and you're not losing all of the old threads (which are now read-only for some reason).
Gear: MacBook Pro, Photoshop CS5, Wacom Cintiq 12WX as second display, Mac OS X 10.7.4
Problem: Photoshop seems to only use the Monitor Profile of the main display (i.e. the one with the menu bar in System Preferences>Displays>Arrangement) - some people say yes, this is the case, some people say no, Photoshop uses independent profiles for each display.
Manifestation: If I set my MacBook screen to the main display, color looks good in Photoshop on the MacBook and terrible on the Wacom and vice-versa. However, in Lightroom and other applications changing the main display makes no difference to the output on each display.
Preferred solution: I would like to have my MacBook as my main display with menu bars and dock etc, but then I want the Cintiq to be the display I use in Photoshop, for obvious reasons. In my workflow, I would like to have my image open in 2 windows, one on the Cintiq for retouching and one on the MacBook to check progress and color etc
Curveball: I have a trial of CS6 and the problem seems to be fixed.
Been using CS6 PS since Beta. No problems till 13.1.1 came out. I'm in Full Screen Mode 95% of the time and 100% when I'm retouching.After the most recent update OpenGL funtions will become disabled when I go to Full Screen Mode. This is very annoying! My MBP is connected to a 30in Dell Ultra.
Here is my System Info
Adobe Photoshop Version: 13.1.1 (13.1.1 20121213.r.223 2012/12/13:23:00:00) x64
Operating System: Mac OS 10.8.2
System architecture: Intel CPU Family:6, Model:58, Stepping:9 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2300 MHz
[code]....
6 months ago I purchased a new computer with Windows 7 Home Premium. I reinstalled Paint Shop Pro X4 but have not used it much since then. Recently I wanted to print some photos and I was very disappointed that the results were VERY red. I have a Canon MP600 printer that I have used for several years with very good results. With my old computer (on Win XP) the difference between the monitor and printer was minimal. I am not familiar with the technical jargon relating to color management and relied on the operating system to do a satisfactory job. I only use PSP as a hobby and am not as picky as most photographers but this was very disappointing. I also tried printing some graphics as might be used in a brochure and the colors were too red. I cleaned the print heads as per the Canon instructions and all 5 ink cartridges are full. I might also mention that grayscale images print looking similar to sepia although they are grayscale on the monitor.
don't get too technical as I don't really understand this whole "color management" thing.
I've been running CS6 on my laptop for the past month with no issues regarding lag.
Today I decided to start using an old monitor as a second display, but whenever it's plugged in there is a huge amount of lag within Photoshop - so much lag that it is pretty much unusable.
From what I can tell, most other programs run fine with this setup (I've tried Sai and After Effects, and both are lag free).
I've tried searching this issue - and there's a lot about configuring refresh rates on the individual monitors so they're the same. Tried that - makes no difference.
Any settings within Photoshop I could tweak to make it run better?
I have a dual monitor setup using one video card, and it is configured so that the desktop extends to my second monitor (monitor right).
In CS3 the application with palettes, etc. is on my left monitor and my working document (image) is on the right. Anytime I open an image, boom, it automatically opens on the right monitor. It remembers that the right monitor is where I last had an image document open, so the next one opens there automatically.
In CS4 I can't figure out how to do this. Every document I open shows up on the left monitor and I have to drag it over to the right where I want it. This continues to happen even if I uncheck "Open Documents as Tabs".
I have "Remember Panel Locations" checked, too.
how to change this?
Just installed dual monitors for Photoshop.When in Photoshop using dual monitors, when I click on the image to expand it goes to both monitors. Is there a setting where it only expands to the one (left) monitor?
View 3 Replies View RelatedI recently setup a second monitor on one of my pcs, both monitors i have had for a while and both are Dell 19" LCD (the primary monitor is an "ultrasharp" and the second is a standard one)
Both monitors work fine and display as expected... except when using Photoshop. The black in any pallette on the second monitor is displaying as a horrible brown colour but only on the second monitor. If i fill an area in black on the primary and drag the window over to the secondary, while i have the mouse button pressed and dragging, the colour on the second monitor is still black. As soon as i release the mouse it turns into this horrible brown colour. This is also affecting the colour picker dialog.
Unfortunately it's worthless me posting any screen shots of this as the image turns out fine - its just the photoshop interface. Although the black on toolbars and the like are fine, only colour pickers and the actual drawing area are effected.
Its clearly not drivers as the second monitor displays everything else fine. And it's not my Photoshop install because it works fine on the first monitor. - Also if i remove the first monitor - the second one then displays fine again - only seems to be an issue as a dual monitor setup.
I understand that it's all probably as clear as mud - but I just wondered if anyone else had experienced this and/or had a resolution.
After reverting back to one monitor with Photoshop 7.0, I can no longer see pop up menus (for blending options to be specific). The pop up is somewhere, but not where I can get to it. I have to press Enter to get back to where I was working.
I have tried Window-Workspace-Reset pallet but pop ups are still way out supposedly on my non-existant second monitor. I never saved my workspace from the dual monitor times so there is also nothing to delete. Any help would be much appreciated....I have a job to finish.
I'm really liking the dual monitor with Photoshop. My question is when I have PS open, I put my pallets on the right monitor and the work files on the left. When I have an image open and click on the maximize tab on the uppper right corner of the image, it expands to both monitors. Is there a setting to where it only maximizes on the left monitor instead of across both monitors?
View 11 Replies View RelatedSometimes I run a second monitor off my laptop. When I run photoshop WITHOUT the second monitor, it tries to pop up certain windows where the second monitor should be, and I can't get at them. I end up having to kill photoshop and open it again. Does anyone else have this problem? Is there somewhere I can tell photoshop not to try to use the second monitor?
View 7 Replies View RelatedI have dual monitors set up. I found some wallpapers online for dual monitors so I tested one. But for some reason it shows up twice for each monitor, instead of streching the large horizontal photo across both. I wanted to make my own using the dimensions of the ones online, but does anyone know how to make it work correctly?
View 9 Replies View RelatedJust installed ACS6 and ran updates on a mac book pro and photoshop images look fine on the laptop display, but slide the image to the second monitor, the image turns black. Slide it back and it is fine again.
Going to system prefs and change main monitor and the problem is reversed, it is black on the laptop and fine on the second monitor
i gave dual monitors a try today for the first time. its nice but i dont feel its needed.
i discoverd that when i unplug the second monitor i lose my photoshop page and i cant get it bakc unless i restart photoshop while pressing shift+cmd+alt.
is there another of making it know to reset the window to the main screen?
If I try to open Photoshop CS5 while my second monitor is plugged into my laptop (via VGA cable), it loads normally, but won't display any opened images. I get a gray background and nothing else. [URL](I can even see the tiny image preview in the navigator, but not the image itself.)
However, t'll work just fine if I open Photoshop with the second monitor disconnected and THEN plug it in, so it's not a problem with the dual monitors in general...just when first opening it. It's annoying because, if I'm working on a project and realize I have to make a quick image tweak in Photoshop, I have to unplug the monitor and then rearrange all my windows after Photoshop's done loading and I can plug it back in.
I can't seem to find any information online that specifically mentions this issue. For reference, I'm using Windows 7 on a Lenovo laptop.
When I use a brush or any of the clonehealing tools the brush start lagging when I do you short and quick strokes.
Longer and continuous strokes don't have any lagging going on.
I have reinstalled the driver and tried a few different versions as well but the issue persists. I also tried different settings for the Graphics Processor in preferences but no change.
I am on an Intuos5 L and before that I had the Intuos 3 A4 and I had the problems with that tablet as well.
I am on i5 iMac Quad-Core 2.5ghz, 32gb ram Radeon HD 6750M 512 MB - Mac OS X 10.7.5
Update:After a few testing I realized this lagging appears to happen only when I am on Dual monitor setup.
My main monitor is an Eizo CG222W I have Photoshop setup whereby all my tools and panels are on my iMac and the main window with the image is on my Eizo.When I only use my Eizo with tools and panels then the lagging disappears.
Is it possible to use a laptop with a Wacom Cintiq 24HD as a dual monitor setup for Photoshop.....?
View 3 Replies View RelatedI'm having the problem with pen cursor when i use dual-monitor.
Before I run GIMP everything work fine, The pen cursor can move in both monitors.But when I run GIMP, It lock my pen area into only the main monitor, even if I close GIMP. So I need to restart my PC to use both monitor with my pen.
It seems to be fine locking pen cursor area in a single monitor, But GIMP cursor IS NOT CORRECT with pen cursor. They both should be the same, But they are not. As you can see in the photo.
I've tried changing the input mode for tablet to Screen and Window. But it still doesn't work.
PS.I'm running GIMP in Window 7 (32Bit), My tablet pen is Kanvus Life H85
I have a laptop running on Windows 8 and have a dual monitor setup with the desktop extended to my LCD monitor(main monitor).
GImp 2.8.2 opens on my main monitor BUT the icons/menu etc don't register my mouse clicks, though I can move and resize the windows, highlight things etc
When I move the Gimp window to my Laptop Screen everything works fine on that screen only?
I have used this setup with Windows Vista with no problems at all and even tried Gimp 2.6 on this setup and it works fine too...
read that color management pdf by gennady petrov and tried a few things he wrote. I turned off color management in the printer driver, chose corel to manage color, and the image default profile sRGBxxxxx. picture was way dark and ugly. tried several other profiles and same dark picture. hmm that did not work so well.
went back to the printer driver and disabled no color management, and chose the profile Adobe RGB. still kept corel as manager and chose A RGB as the profile and the print looked spot on. Have not had problems printing from corel because I have come up with my own system, but was quite surprised at the result from turning off color management in the printer driver.
2012 hotbox not working with dual monitor?
View 5 Replies View RelatedIs there a way, when using dual monitors, to move the whole CS6 frame to either monitor? Right now it's just cemented to my left monitor, and I want it on the right.
View 6 Replies View RelatedDoes LR 5 handle a dual monitor setup with different aspect ratios (16:9 and 16:10)?
I'm planing to buy a 27" 16:9 monitor and use it as primary together with a 22" 16:10.
What is the best way to get consistent color from one monitor to another. Is that even possible?
View 6 Replies View RelatedI've just got a new monitor and i have downloaded an ICC profile to use as i don't have calibration hardware yet. I've loaded it in Windows using color management. My question now is what color 'working space' i should set in Photoshop.
I must say that learning about color has been a steep learning curve for me so I have tried to avoid it as much as i can!!! If a total novice guide on color has been covered in another thread just point me there!
how this technique was done.
im trying to create something similar.
I've been struggling with color calibration for a while now. I have two displays:
1) Samsung 226BW (22" 1680x1050) which is a pretty cheap TN panel and is very poorly calibrated by default
2) Viewsonic VP930B (19" 1280x1024) which is a nicer panel and pretty well calibrated by default
Video card = 8800GT. In XP, I always used the nView calibration tool an followed the onscreen sequence to get both screens very nicely calibrated, and they would always stay that way. In Vista, unfortunately, NVIDIA has decided to not carry over their excellent nView software. So I'm stuck leaving the Viewsonic uncalibrated (which is mostly ok), and for the Samsung I use a software from Samsung called "MagicTune" which takes me through a series of onscreen exercises (not unlike nView did) and leaves the monitor pretty well calibrated. I've tried other software like QuickGamma and simply cannot get the same results as I can get with the MagicTune, which puzzles me.
Anyway, the problem is that (1) MagicTune almost never applies the correct "MagicTune profile" at startup, so I have to apply it manually, (2) I often have to re-open MagicTune (after gaming, for example) and re-apply the correct "MagicTune profile," and (3) MagicTune only functions well when the secondary Viewsonic (unsupported by Samsung) is disabled, so I often have to go through a long complex rigamorole of disabling and re-enabling the display to get MagicTune to work.
Is there any way I can "save" the color calibration state that the Samsung is in (when properly calibrated by MagicTune) and use a different software (or just Windows) to apply it, so I can stop relying on MagicTune? I know that I can manually adjust a lot of things about my color calibration without using MagicTune, but without the MagicTune exercises on screen I cannot achieve the same end result, and the "profile" created by MagicTune can only be applied by MagicTune.
I have a IMAC 27, i have had trouble with color management (monitor Vs Print). Whenever i alter an image, change the exposure, hue or saturation, it will not match monitor it receives a yellow overcast. Whenever I print the orginal image no problems. Why isn't photoshop picking up the changes?
View 1 Replies View RelatedI have a windows xp system and I installed two new color profiles from www.eci.org cause I want to send graphics to offset print:
1. eci_offset_2007.zip = ISO Coated v2 (ECI) = ISOcoated_v2_eci.icc
2. ecirgbv20.zip = eciRGB v2 = eciRGB_v2.icc
These new profiles are correct installed and display under start->systemconifiguration->color profiles.
But when I try to choose these in photoshop colorsettings SHIFT+CTRL+K in RGB: or CMYK: they are not listed. I restarted photoshop and the whole system but no chance. Only one additional profile under RGB: is listed which comes from spyder2express for my monitors - rest is default.