Revit 2012 stopped running for user with admin rights 100% of the times. Computer is 64 bit 4 core processor 8 logical cores and 8.0GB ram.If I right click on the Revit icon and select "Run as Administrator" will will launch 50% of the time and runs OK.
View 1 RepliesI am trying to install the trail version of Illustrator CC, but the install script comes back with the message "Installation Failed" Administrator priviedges are required to install. Please Install later." I can install programs on my computer, but it is through my company's mechanism that temporarily elevates my privildges to allow program installations. Has success in installing the program? If so, how?
I am using 64-bit Windows 7, SP1
I have encountered a bit of an issue. i have used my CS4 photoshop for years now on my original administrator account which is the account I installed it on but now when i try to open it I get the splash screen and it starts to load and then where it should fully open it just goes away?? I can log in to any other account on my computer and it opens just fine. have to sign out go to another user account edit then log out and then back in to my normal admin account
View 15 Replies View RelatedMy add-in is working fine in Windows 7 with or without Run As Admin.
I have created my add-in using VS 2010 SP1.0.
Now, if I try to launch Inventor(w/o Run As Admin i.e just double click) 2014 SP1.0, in Windows 8, my add-in works fine.
If I launch Inventor with Run As Admin, My add-in stops receiving call backs from Inventor.
Loaded Photoshop Elements 9 on a computer that is not on the internet and works fine as long as the user logging into the computer has admin privileges but a user who does not have admin priviledges gets an Error:6 that says to uninstall and reinstall the product. Uninstalling and reinstalling the product has no effect. I believe this to be that the normal user doesn't have permissions to a file somewhere that it needs to write to but can't seem to locate that file as I have given write permissions to Adobe under Programs & Common Files but no success.
View 10 Replies View RelatedI have a users who cannot change parameter values for iLogic unless user is a local admin on the workstation. This machine has just been upgrade to Inventor 2013.
View 1 Replies View RelatedI HAVE THE SAME PROBLEM, BUT THE FIX IS NOT WORKING IN AUTOCAD 2012
View 2 Replies View RelatedIve upgraded my pc to get better performance out of cs4 that Ive been using for about a month now, e8500 cpu Asus P5Q Pro m/b 4Gb ramm and Gigabyte ati radeon 4650 1 Gb Graphics card, keep getting error message cs4 had to close, I suspect its a conflict with new graphics card. Ive down loaded cs4 update and card has latest driver.
View 5 Replies View RelatedAll of a sudden CS5 stopped working. If I am cropping a photo, it takes about 5 min to complete, then zooms way into the pic. Several other things aren't working such as "copy/paste".
View 2 Replies View RelatedFor exam purpose I'm install Inventor 2012 and after finishing exam Inventor 2012 is uninstalled.
And then I'm trying for run Inventor 2011 but can't run.
So what happen with my Inventor 2012 where before install Inventor 2011 is running normally.
My company has upgraded to AutoCAD 2012 on VDE but CAD seems to be running a bit slow/sluggish. Is there any settings I should tweak in order to improve performance?
View 0 Replies View RelatedI get this dialog and I have the lates GE just reinstalled
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I am using autocad Architecture 2012. the other day it randomly stopped recognizing most commands. I cannot TRIM, CO, OFFSET, ect. all of the main ones. a couple things still work, If I need to draw a circle I can type D and still input diameter. But for all of the rest of those it says "Unknown Command, press f1 for help."
View 3 Replies View RelatedI have a server running Windows 2003 and I need to have limited users be able to run Autocad LT 2012. Every time it runs, Windows Installer pops up for a very short time and AutoCAD never actually runs. I believe that the pop up is for the English Language Pack, but I cannot be positive about it. I have already read the KB article on running as a restricted user, URL.... and the environment does not prevent the user from accessing any of the registry and file locations specified. I have tried many things to get this to work, but nothing seems to do it. One notable thing that I tried was to make the user an admin, run the program, then remove them from the admins group, but as soon as I remove them, they are no longer able to run it.
View 3 Replies View RelatedWe are using 64bit Windows 7 & Inventor 2012. We got the drawing tools to show up correctly on one machine, but can't get them to show up as an add-in on a second machine. We've uninstalled & re-installed the tools. registarted the tools many times. Nothing seems to be working.
View 9 Replies View RelatedI know 2013 are more exposed and the .net can extract contours. However using 2012 at the moment. so my plan is using .net to add the user contours and then use com object to extract.
so far i can get the surface object and assign to two different surface variable one is .net and one is com. I am looking at the surface analysis object and can't figure out how to add contours at user elevation. it is also read only in the surface object. but i find this:
SetContourData
(analysisData()
which is obvious not read only. so any sample code of the procedure of assign user contours?
We are having issues with text height and variations depending on how the text is added.
I am currently adding etching to sheet metal parts by using the user parameters (which are driven by 3rd party source, excel file) and using a cut extrusion -1mm.
We have developed a marco which detects the shape of each letter and adds etching to our sheet metal program manually. We do this to get rid of the double lines when you cut text into a part. Our process is design in Inventor, unfold then convert to DXF 2004, where we import to our SM programming package (Radan).
I have noticed that when using 10mm simplex if the text is driven by parameters and 10 point text is selected the charecter height is 9.9928mm, however if the text is added manually it measures 10mm exactly. Why is this happening? It is probably of no concern to most, but we would need to add extra charecters to our macro to account for the descrepency, and in turn would take the macro longer to run.
When the text is added by user parameters, you can briefly see the 10mm text height flash to 9.99mm when finishing the edit sketch. Changing this to 10mm again has no effect.
what is causing this, or have any alternative ways of adding 10mm simplex single line etching to a dxf from an Inventor 2012 SM part?
I am grading a parking lot and trying to highlight areas with less than 1% slope.
I can't find the spot to set user slope ranges in the setting tab.
I can find setting number of ranges with three options of minimal use.
This used to be so simple in LDD.
The examples I have seen for this function all show odd ranges of limited value.
IV2012 API with VB:
How can i add an item to a Multi-Value-List of an existing User Parameter in Inventor2012 (Accessing API with Visual Basic) ?
My idea is for example:
uParams.Item(i).ExpressionList.AddItem(As String)
The problem is, that such a function "AddItem" doesn't exist.
I have a couple users that when a command is picked from the ribbon Revit starts to run a configuration process. A window opens like it is installing Revit again. They can select cancel or OK and the command will continue to allow them to work but it is very time consuming waiting for it to stop or cancel the process.
This started to happen once update 1 was installed for Revit 2014. I have tired repair/reinstall and uninstall Revit to stop it but it still continues even if Update 1 isn't installed.
Windows 7 64bit with all the latest patches. Revit 2014.
what I can try next. I have 70 users and this is only happening on 3 of them.
When I open the program I get a pop up that says Autodesk Revit has stopped working. I have uninstalled the program and reinstalled it. I am not sure what happened because it was working fine about a week ago then it stopped working all of sudden. I did a system restore to when I thought it worked last and nothing.
View 3 Replies View RelatedI have a topography model that I've been working with for a while now, and all of a sudden the spot elevation stopped working. I have one spot elevation that works, that i can move around and it'll change to the right plus height. But as soon as i try to make a new one it just says -0.05 no matter where i put it except for if i hover over a stair, then it displays the correct plus height.
View 5 Replies View RelatedI have a larger Revit file that has linked in models (mutiple buildings - each bldg is its own model)
I need a COMPLETE file for Navisworks...
When I go to Revit, and try to export to NWC file, it starts the export process... about 40 minutes in (YES, 40 mins, it just loads and loads and loads) I will get an error message that "Revit has stopped responding"
This is now the 3rd time today I have tried this with no success. I also tried loading into Navisworks directly (Nav 2013) but will not read the files properly and bring them in together.
I know Revit 2012 is capable of exporting linked models to a single NWC file... however my computer does't seem to like it. I even just sat and read a book and did not internet serach or running any other programs at the time....
I NEED THIS TO WORK
Exporting each individual Revit model to NWC and recompling them in Navisworks IS NOT AN OPTION.
I need to export this large linked Revit file as ONE nwc file.. I know it CAN be done...
My laptop is fairly newer and has like 8gb of ram, so that shouldn't be the problem, is it?
One of our employees logs in remotely to a local PC running Revit via terminal services so that all work is done on the local network. The employee is acting through screenshots. All worked well using 2009 Revit or Architecture on XP machines. However, we added new faster Windows 7 machines with 2012 products. The PCs are all 64 bit with 16g RAM and a 22mb internet connection.
View 3 Replies View RelatedI am considering buying a copy of PS6 with CS2 upgrade, both on original disk. Since you can't use them on multiple computers, what needs to be done to transfer rights over to the new owner?
View 2 Replies View RelatedIs it possible to assign read only rights to dwgs so that when an engineer opens the dwg file it will only open in reas only and also when a different disxipline tries to open a file if wkuld also only open in read only. this to protect other xispilines opeining and making changes they accidently do frim tjme to.time
View 4 Replies View RelatedI have a Revit model (A) being linked into another Revit Model (B). In model B I set the VG of the linked model A to By Linked View. Now, when I do this I see all my Element Keynotes, but non of my User Keynotes show.
Things tested:
Created models C and D to try in fresh environment - All Keynotes show up
Created model E and linked A into it - User Keynotes do not show up
Overwrote the Keynote Family in A and retested - User Keynotes do not show up
So this means there is some problem in Model A that it is not pushing the User Keynotes through when linked.
I've started a new job and inherited a lot of custom files and menu's without documentation.
The company CUI is setup as the enterprise menu and displays READ ONLY on my system. And the company palettes all have a padlock displayed. All relevant files are on the server.
WHat rights do I need to edit and update these files?
I'm inquiring whether or not it is possible for Revit ceilings to be customized by the input of a user regarding the shapes and sizes without using a .pat file. Almost like a parametric object with predefined limitations. For example: a rectangular ceiling tile 'x' can be from 6 inches to 10 feet and side 'y' can be from 6 inches to 6 feet. So someone can select the ceiling type and actually input what size 'x' and 'y' they'd like while staying within those limitations.
View 1 Replies View RelatedOften when I open a project I ahve been woking on alone I get the following message:
"This file is already open for editing by another user. You will be unable to save any changes before that user closes the file."
Since I am working on the project alone there are no other users who could have the file open. I don't know why I'm getting this message.
Whenever I open cs2 it says i dont have privileges and to open with an administrator account,
View 2 Replies View Related