Revit :: 2014 Starts Running Configuration Process?
Oct 25, 2013
I have a couple users that when a command is picked from the ribbon Revit starts to run a configuration process. A window opens like it is installing Revit again. They can select cancel or OK and the command will continue to allow them to work but it is very time consuming waiting for it to stop or cancel the process.
This started to happen once update 1 was installed for Revit 2014. I have tired repair/reinstall and uninstall Revit to stop it but it still continues even if Update 1 isn't installed.
Windows 7 64bit with all the latest patches. Revit 2014.
what I can try next. I have 70 users and this is only happening on 3 of them.
View 1 Replies
ADVERTISEMENT
Jul 4, 2013
I have problem with rendering. I record Videos on my Panasonic SDT750 and they are in AVCHD format. I usually use two options Render video "same as first clip" (whilst all videos are the same) or upload to you tube in 16:9 format. When I start to render, the process starts and just stop sometimes at 2% sometimes at 4% and dosen't show any error message. It worked previously with no problem.
I tried to restart the software, nothing.. I tried to re-install, nothing.. This problem seems to occure after latest update. My desktop spec. should be ok, like I said it worked fine before.
I run Win7 Professional 64bit, processor: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3601 Mhz, 4 Core(s), RAM: 16GB and graphics card: GeForce GTX 570 from NVIDIA.
I didn't make no changes in settings, everything is as it was first time installed.
View 1 Replies
View Related
Nov 3, 2013
Got a new Windows 8.1 PC. Successfully transferred all photos (about 12000) to the new hard drive. When I open Photoshop and use "get photos from files and folders", I can locate the pix but when I try to import them, the process starts then stops without bringing any to the organizer.
View 2 Replies
View Related
Dec 27, 2011
We have about 25 workstations on our partner company, with the exact hardware and software configuration. We have 2 workstations with problem, but the other 23 are fine. The problem is those 2 is taking to long when loading.
I tried to load the program without loading template (startup to 0) it loads fine. The problem starts after it loads template or existing file. I can tell it's not the file problem, because after we open a file successfully, any other file after that opens normally. So there must be another process after loading the first file.
I suspected there is an addon program that cause this. Is there a way we can see what processes are running on command line (like in Windows command console), so we can find what cause this?
I think this might also because they are using ACAD MAP3D 2010, which are not certified for Windows 7 64bit on their machine.
View 3 Replies
View Related
Nov 27, 2012
I have just installed PSP X5 and have found a couple of problems.
First one is when I close PSP the process still runs for a good 10 minutes afterwards and consumes a lot of system memory. I found this by accident after I closed PSP X5 and then decided to start it again. It wouldn't open until I closed the previous process.
Second, when I start PSP after the splash screen and the program interface appear I have to wait about 1 minute 40 seconds before I can do anything with the program.
how to improve this situation because at the moment I don't consider this acceptable?
I'm running Windows 7 32 bit with 4Gb of RAM, other than browser and email no other big program is running inthe background
View 11 Replies
View Related
Aug 15, 2012
I have a batch program which I want to launch from a LISP program.
First this is an attempt at an automated process whereby user input is extremely restricted. Other than the first click of the mouse on the menu item to save a copy of the file to a very restricted folder, no other user input is allowed.
AutoCAD, like most commercial apps writes a temporary file and then renames it when you choose save or saveas. And due to the restrictions in this folder that will not work. Crazy, I know but it's the parameters I must work within.
The batch file I'm launching calls another batch program in it's execution and I'm wondering if that could be where control is lost. But the thing is I can type this at the command line in AutoCAD:
(startapp "//a_very_long/novell_server_path/my_folder/vlisp/mybatchfile.bat")
The whole process works great. The command window flashes briefly AutoCAD closes the active drawing window just like I want it to. And when I check that the dwg file has been copied to the restricted folder it's there and done. But when I place that same command within my LISP program or one like this:
(command "._STARTAPP" "CMD //a_very_long/novell_server_path/my_folder/vlisp/mybatchfile.bat")or(command "._STARTAPP" "CMD ""//a_very_long/novell_server_path/my_folder/vlisp/mybatchfile.bat"")
or just about anything else I try it fails to run. Perhaps I've been looking at this problem too long. I think I may move on to a VB.NET process to do this but I am really baffled why it will run from the command line but not within the program.
View 4 Replies
View Related
Nov 19, 2013
Is it possible to change the Revision Number as starts from 0,1,2,....... in Revit Titleblock.
View 1 Replies
View Related
Nov 23, 2012
Recently we bought numbers of Revit Suite 2013 and expects the best performances from it. but, regretably speaking the rendering time is worst than before upgrading.In addition to that, we also upgraded our Workstation to 16 GB RAM and a QUADRO graphic engine, but it still take more than an hour to render one simple view.what could be the cause? i hope it is not the software that we bought( cost us thousands... ) here i post the rendering screen and the task performance while we are rendering,ASAP reply needed as all our REVIT workstations moving away from our deep expectation.
View 1 Replies
View Related
Apr 18, 2012
Is there a program out there or function within revit that will allow a better work flow between designers and drafters? Our office spends a lot of energy printing and maintaining a "check set" for the project architect to work out of. He has a working knowledge of Revit but simply prefers the speed and simplicity of sketching. Is there anything that mimics that type of experience but is digital and thus always curren?
View 4 Replies
View Related
Oct 18, 2011
Revit 2012 stopped running for user with admin rights 100% of the times. Computer is 64 bit 4 core processor 8 logical cores and 8.0GB ram.If I right click on the Revit icon and select "Run as Administrator" will will launch 50% of the time and runs OK.
View 1 Replies
View Related
Jun 20, 2011
One of our employees logs in remotely to a local PC running Revit via terminal services so that all work is done on the local network. The employee is acting through screenshots. All worked well using 2009 Revit or Architecture on XP machines. However, we added new faster Windows 7 machines with 2012 products. The PCs are all 64 bit with 16g RAM and a 22mb internet connection.
View 3 Replies
View Related
Sep 16, 2011
We have a client with very strict layer name standards for AutoCAD. I have created a .txt file for locating the Revit elements on the correct layers when converting to .dwg files. The problem is the new layers created in AutoCAD during the conversion include a "3D" prefix which we then have to go in and manually eliminate. Is there any way to avoid this, it totally disagrees with the client's naming standards?
View 4 Replies
View Related
May 15, 2013
I installed revit 2014, but the libraries cant load when search in the load family. In what directory was installed that libraries...?
View 1 Replies
View Related
Nov 20, 2013
problem when i open DWF file (exported from Revit 2014) into Autodesk design review 2013 i cannot see the file in
View 4 Replies
View Related
May 31, 2013
There is a Green Bar with 97% with a grey Cancel beside it that does nothing in the left hand corner of the toolbar continually visible when a project is open. When the project is closed this does not completely clear from the toolbar.
What is this? Why is it there? What does it mean? Why is it not 100%?
View 2 Replies
View Related
Apr 28, 2013
How to save a file as a PDF in Revit Architecture 2014? I have tried going to print and then just save as a PDF, but there is not a PDF option.
View 3 Replies
View Related
Jun 21, 2013
I have just loaded Revit 2014, and then loaded a project file created in Revit 2013. When I try to render a view in the cloud I get an error message that says "The file could not be translated.-1" I have tried this with several projects and get the same error for all.
However if i create a new project in 2014 the render works fine, it only seams to be a problem when I upgrade a project from revit 2012 or 2013.
View 1 Replies
View Related
Jul 24, 2013
The program works fine until I try to edit the boundary of the topography. As soon as I click "edit boundary", the screen goes black for about an hour, then comes back with about 25% loaded. This cycle repeats until the loading is complete, so it takes me a few hours just to enter edit mode. The file is only 17, 280 KB, and Ive been running 240,000 KB files without an issue whatsoever.
View 3 Replies
View Related
Aug 12, 2013
We are being pushed from some of our customers to supply BIM files for Revit.I was told by our software supplier that Inventor 2014 could create Revit files, and it looks as though I can via the BIM Tab on the Ribbon. I havent used Revit or created any BIM content before and I was hoping to open another manufactures file (*.RFA) in Inventor to disect the file and how to create our own files. I can only find an import option in the OPEN dialog box for a Revit Project File (*.rvt). Is it possable to open/import a RFA files in Inventor 2014?
View 4 Replies
View Related
Feb 16, 2014
I have a special requirement for a CMU wall, with a 2"x6" stud wall.I am building an exterior wall for a residential home model.
Brick exterior, basically is 3 1/2" width
1/2 mortar joints
I have attached a pic, of what the pattern should look like (created in msWord)1/3 running bond, with 2 sizes of concrete block.I saw somewhere on line, the program for the repeat, but am unable to find again.
View 3 Replies
View Related
May 15, 2013
my laptop has been stolen and I had to buy a new PC...The new one is a windows 8, therfore, I had to install revit 2014....the problem is that I have been working on a graduate class project using revit 2012, and now revit 2014 will not open the files I built on revit 2012...I have only 10 days to rebuild what I have been working on for 3 months!!!...is there any way to open a revit 2012 on 2014 or at least convert it to work on 2014.
View 1 Replies
View Related
Mar 3, 2014
I'm missing some buttons from the panels in Revit LT 2014. I've installed updates 1 and 2.
View 6 Replies
View Related
Sep 5, 2013
I have a drawing model where I cannot create a filled region in one sheet, but on other sheets in the same model I can. the filled region appears but does not mask anything - it is transparent. Transparency is set correctly (to zero) and I have tried bringing it to the front.
Running Revit LT 2014 with latest update.
View 3 Replies
View Related
Dec 16, 2013
in 3D - Section Box all measurement tools are grey indication of no use/doesn't applay/stay away/? Using 3D-SB you can have a glance insidea 3D modell and there be objects that only have a elevaton and no other properties except New Constuction (Specialty Equipment). So confirming space is a pain.
View 6 Replies
View Related
Sep 18, 2013
I have a client that wishes to have the Revit 2014 file reverted back to 2013. I was told that I could send the 2014 file to Autodesk and they would be able to revert it back to 2013. Is this true?
View 2 Replies
View Related
Nov 21, 2013
We are trying to implement Revit server in our organisation. We have installed Revit server on windows 2013 server. We are able to connect to our local server and sync and relinquish the revit model. We had setup another server in our branch office. Now, how to sync the revit model in the local server to the server in branch office. We are able to see both the servers in revit server admin and also copy paste files through browser.
View 2 Replies
View Related
Jun 10, 2013
Whenever I try to print sheets that contain shaded (or better) 3D views, these 3D views do not appear on my prints/Pdf's/DWFx's. I've tried different PDF-drivers and hardcopy printers that are in my office, but they all don't work.
Some things that maybe can narrow the cause down:
- Printing a single 3D view to a DWFx works
- Printing a single 3D view to PDF or hardcopy printer doesn't work
- Printing a Hidden Line view on sheets works on alle printers
- 2013; printing a sheet containing 3D views works. When upgrading the same project to 2014, the same sheet fails.
View 7 Replies
View Related
Aug 22, 2013
- My Revit 2014 is closing after its showing only the interface ( open 3 seconds then closed automatically )
its first time to download .
- and how I know if it haa a conflict with my NAVIDA
View 1 Replies
View Related
Feb 21, 2014
I am looking for a way to boost the performance in Revit 2014 while loading or updating complex family’s. The problem at the moment seems to be that Revit 2014 only uses 1 cpu while loading family’s even if you have a high end multicore workstation at hand. So with hardware there is not much you can do.
A possible solution should be in virtualization, i.e. running Revit 2014 in a virtual machine with a single vCpu assigned on a vmware Esxi or Microsoft Hyper-v multi core host. I have tested this solution but ran into the problem that neither Esxi or Hyper-v distribute the load of the single Vcpu in the virtual machine over de multicore’s of the host. 1 Vcpu uses just one core of the host so no cpu performance advantage at all. The best practice of adding Vcpu’s to the virtual machine just lowers the performance of Revit in this case.
Revit 2014
View 2 Replies
View Related
Feb 17, 2014
I get the following error when trying to use etransmit on two different projects:"the following files could not be checked for links"..We use Revit Server. We have many projects which etransmit just fine from Revit Server.
I looked this up and the only info I found said that Revit Server is locking a link or links or the main file. I (and our IT dept) checked Revit Server for locking and did not find any issues. I have tried locating the consultant linked files on the Revit Server too.
View 3 Replies
View Related
Nov 6, 2013
When I click on search, my computer opens the notepad application and the error message says "the filename, directory name, or volume lable syntax is incorrect." I cant go to the videos or the wiki directly from revit either. None of the resources on the right side of the screen are accessible. I do have the educator version of the software. I have tried to reinstall from the application, but have not uninstalled and reinstalled completely.
View 2 Replies
View Related
