I have a client that wishes to have the Revit 2014 file reverted back to 2013. I was told that I could send the 2014 file to Autodesk and they would be able to revert it back to 2013. Is this true?
View 2 RepliesWondering if there is a way to revert a powerclip frame back into an object (vector path).
If there is no feature I would like to request that in the next "upgrade" of CorelDraw. As it is now I am forced to use time consuming workarounds to complete my illustrations when they are ready for production.
What was the reason to get rid of the usual powerclipping such as it was in X5?
I have somehow pressed a wrong button, and have switched my color-picking pallatte to a new one that I don't particulaly care for (see images); is there a way to revert back to the old color picking pallatte?
Old Color Picker (that I want to use):
New Color picker (that I do not want to use):
Is there a quick way to revert an edited BOM back to the original quantities before they were edited?
View 2 Replies View RelatedAfter hours of work, working on an Aircraft Repaint, I somehow managed to move the template so that all of the lines (in this case the 'livery lines') became out of 'sync' In other words the layers became out of line. Went to load it into my editor and every thing was all over the place
The Q is...is there a quick way to get the template/Canvas or whatever to revert back to it's original state. i.e. everything within there parameters?
How do I revert back to an older autosaved project? I can't launch my current project. I was working away, in a cfx on my timeline, smoke crashed. I tried to log back in and now it just crashed every time.
View 4 Replies View RelatedAlmost every time I make changes to a photo and go to save them it reverts back to the original after I update the name.
View 5 Replies View RelatedI was working with a document in PS and I must have inadvertantly done something to turn my background sceen to black. How do I return it to the standard white?
View 2 Replies View RelatedRotated images don't always stay in new rotated position. Revert back to original orientation?
View 1 Replies View RelatedIn our drawing office we use Inventor in a mining materials handling environment. Our output is mainly structural drawings where we require a bill of materials as part of creating a drawing. Whenever I insert a BOM in the drawing environment I get this table which is labeled in a foreign language (it looks like an Eastern European language) and the format is not as per the standard Autodesk installation setup.
How do I either revert back to the standard setup or do a BOM setup from scratch?
We use IV 2013 Professional on Windows 7 64 bit.
I merged my layers down to scale to proportion and I thought I was done with the project, so I saved it and exported. I then learned that I did something incorrectly, so I went back to the project only to remember I merged the layers and I don't know how to undo that. How do you revert the layers back to layers?
View 4 Replies View RelatedI have 2 staff members who both have recently had problems with their custom settings from OPTIONS revert to the default settings every time they close out of AutoCad. One is using AutoCAD 2013 on W7 & the other is using AutoCAD 2014 on W8.1.
They have to reset their display, units, osnaps, etc regularly. I suggested creating a profile they can use until we resolve the problem,
I have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
Happens every year. Upgrade and spend half a day or more trying to get everything back to the way I had it. All I have is a couple small toolbars for commands that are several clicks deep in the ribbons and I want them "right there" all the time.
I thought Autodesk 360 might be a good tool for this. All it did was DOWNLOAD some old settings and destroy one of the toolbars I'd created. They really need an override in there to specify upload, download, overwrite or don't.
I'm trying to migrate (I guess that's the technical term) my settings from 2013 Mechanical to 2014 Mechanical. It's probably too late already, after 360 did its deal, but I really want to get this down so we don't go through it every year anymore.
I maintain that PTC had this part of it down Pro/ENGINEER. You had a config file that was editable plain text.
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I have this heavy issue, i can't send to back a line, an object or a hatch under other lines. In 2012 i used this feature a lot but in 2013 it's not working very much, maybe 1 time out of 10 and i absolutely can't say why.
HPDRAWORDER = 1 seems to work with a new hatch.. but i can't redraw everything.
Let's say i put an entire floor plan into block then draw over it. (I don't want to start a Xref discussion please) i can't send the entire bloc to the back.I used to do that with 2012, 2008, 2007.. but it's 2013 it's not working, is there a way to correct that?
I installed revit 2014, but the libraries cant load when search in the load family. In what directory was installed that libraries...?
View 1 Replies View Relatedproblem when i open DWF file (exported from Revit 2014) into Autodesk design review 2013 i cannot see the file in
View 4 Replies View RelatedThere is a Green Bar with 97% with a grey Cancel beside it that does nothing in the left hand corner of the toolbar continually visible when a project is open. When the project is closed this does not completely clear from the toolbar.
What is this? Why is it there? What does it mean? Why is it not 100%?
How to save a file as a PDF in Revit Architecture 2014? I have tried going to print and then just save as a PDF, but there is not a PDF option.
View 3 Replies View RelatedI have just loaded Revit 2014, and then loaded a project file created in Revit 2013. When I try to render a view in the cloud I get an error message that says "The file could not be translated.-1" I have tried this with several projects and get the same error for all.
However if i create a new project in 2014 the render works fine, it only seams to be a problem when I upgrade a project from revit 2012 or 2013.
The program works fine until I try to edit the boundary of the topography. As soon as I click "edit boundary", the screen goes black for about an hour, then comes back with about 25% loaded. This cycle repeats until the loading is complete, so it takes me a few hours just to enter edit mode. The file is only 17, 280 KB, and Ive been running 240,000 KB files without an issue whatsoever.
View 3 Replies View RelatedWe are being pushed from some of our customers to supply BIM files for Revit.I was told by our software supplier that Inventor 2014 could create Revit files, and it looks as though I can via the BIM Tab on the Ribbon. I havent used Revit or created any BIM content before and I was hoping to open another manufactures file (*.RFA) in Inventor to disect the file and how to create our own files. I can only find an import option in the OPEN dialog box for a Revit Project File (*.rvt). Is it possable to open/import a RFA files in Inventor 2014?
View 4 Replies View RelatedI have a special requirement for a CMU wall, with a 2"x6" stud wall.I am building an exterior wall for a residential home model.
Brick exterior, basically is 3 1/2" width
1/2 mortar joints
I have attached a pic, of what the pattern should look like (created in msWord)1/3 running bond, with 2 sizes of concrete block.I saw somewhere on line, the program for the repeat, but am unable to find again.
my laptop has been stolen and I had to buy a new PC...The new one is a windows 8, therfore, I had to install revit 2014....the problem is that I have been working on a graduate class project using revit 2012, and now revit 2014 will not open the files I built on revit 2012...I have only 10 days to rebuild what I have been working on for 3 months!!!...is there any way to open a revit 2012 on 2014 or at least convert it to work on 2014.
View 1 Replies View RelatedI'm missing some buttons from the panels in Revit LT 2014. I've installed updates 1 and 2.
View 6 Replies View RelatedI have a drawing model where I cannot create a filled region in one sheet, but on other sheets in the same model I can. the filled region appears but does not mask anything - it is transparent. Transparency is set correctly (to zero) and I have tried bringing it to the front.
Running Revit LT 2014 with latest update.
in 3D - Section Box all measurement tools are grey indication of no use/doesn't applay/stay away/? Using 3D-SB you can have a glance insidea 3D modell and there be objects that only have a elevaton and no other properties except New Constuction (Specialty Equipment). So confirming space is a pain.
View 6 Replies View RelatedWe are trying to implement Revit server in our organisation. We have installed Revit server on windows 2013 server. We are able to connect to our local server and sync and relinquish the revit model. We had setup another server in our branch office. Now, how to sync the revit model in the local server to the server in branch office. We are able to see both the servers in revit server admin and also copy paste files through browser.
View 2 Replies View RelatedWhenever I try to print sheets that contain shaded (or better) 3D views, these 3D views do not appear on my prints/Pdf's/DWFx's. I've tried different PDF-drivers and hardcopy printers that are in my office, but they all don't work.
Some things that maybe can narrow the cause down:
- Printing a single 3D view to a DWFx works
- Printing a single 3D view to PDF or hardcopy printer doesn't work
- Printing a Hidden Line view on sheets works on alle printers
- 2013; printing a sheet containing 3D views works. When upgrading the same project to 2014, the same sheet fails.
- My Revit 2014 is closing after its showing only the interface ( open 3 seconds then closed automatically )
its first time to download .
- and how I know if it haa a conflict with my NAVIDA
I am looking for a way to boost the performance in Revit 2014 while loading or updating complex family’s. The problem at the moment seems to be that Revit 2014 only uses 1 cpu while loading family’s even if you have a high end multicore workstation at hand. So with hardware there is not much you can do.
A possible solution should be in virtualization, i.e. running Revit 2014 in a virtual machine with a single vCpu assigned on a vmware Esxi or Microsoft Hyper-v multi core host. I have tested this solution but ran into the problem that neither Esxi or Hyper-v distribute the load of the single Vcpu in the virtual machine over de multicore’s of the host. 1 Vcpu uses just one core of the host so no cpu performance advantage at all. The best practice of adding Vcpu’s to the virtual machine just lowers the performance of Revit in this case.
Revit 2014