GIMP :: How To Get Template / Canvas Or To Revert Back To Its Original State
Mar 1, 2013
After hours of work, working on an Aircraft Repaint, I somehow managed to move the template so that all of the lines (in this case the 'livery lines') became out of 'sync' In other words the layers became out of line. Went to load it into my editor and every thing was all over the place
The Q is...is there a quick way to get the template/Canvas or whatever to revert back to it's original state. i.e. everything within there parameters?
View 3 Replies
ADVERTISEMENT
Apr 26, 2013
Is there a quick way to revert an edited BOM back to the original quantities before they were edited?
View 2 Replies
View Related
Oct 6, 2013
Almost every time I make changes to a photo and go to save them it reverts back to the original after I update the name.
View 5 Replies
View Related
Aug 24, 2012
Rotated images don't always stay in new rotated position. Revert back to original orientation?
View 1 Replies
View Related
Apr 14, 2013
fix to the common errors caused by previous grab brushes surface proximity behavior along center axis. it was a small thing IMO but the solution created evena bigger issue.
now that is works mostly on some sort of volume proximity along x axis it becomes a big problem for moving around two discontinuous surfaces that are close to center axis.
that last version it was good was 2011. 2012 and onwards it seems to be ruined.
View 9 Replies
View Related
Jun 20, 2013
I merged my layers down to scale to proportion and I thought I was done with the project, so I saved it and exported. I then learned that I did something incorrectly, so I went back to the project only to remember I merged the layers and I don't know how to undo that. How do you revert the layers back to layers?
View 4 Replies
View Related
Mar 21, 2012
Using Photoshop CS5.5 I am at a loss to find the means to discard all edits in Camera Raw and revert back to the original photo.
View 4 Replies
View Related
Aug 29, 2012
The new clone tool in CS6 shows you what you will be transferring to the photo. I find this distracting at times. Is there any way to revert to the original use of the clone tool where the transferred portion does not show up?
View 3 Replies
View Related
Dec 11, 2012
I am using Iphoto with PSE11 but when I save the edited (JPG) image it will not let me revert to the original image. If I select the saved photo with Iphoto it will only let me re-edit it with an external editor (PSE11). This works fine but I can't "Revert to Original" in PSE11. If I try to re-edit it with Iphoto which has the "Revert to Original" button I get the message "Photo edited in an external editor so can't be edited in Iphoto. Duplicate photo to edit in Iphoto". If I do this I still cannot get back to the original unedited picture.
There is an obvious way to get round this by duplicating the original image before doing any external editor editing but there must be an automatic way which I am missing.
View 9 Replies
View Related
Aug 7, 2012
I've just reduced the size of a canvas from 300x300 to 200x200 but when I merge the layers I'm left with a dotted line showing the original size.
reduced canvas size.tiff (128.61K)
Number of downloads: 3
View 3 Replies
View Related
Jan 9, 2012
Upon starting up 2012 MEP I was asked if I would like to convert hatches with too small a scale to solid so as to safe virtual memory. I turned this on, and now I'm noticing some runs of piping showing up as solid. I would rather not have this seemingly random solid hatch all over my drawings.
Is there a way to go revert the hatches to their original scale/patterns? I'd selected the temporary option, however whenever I open the file now it shows as shown in the picture.
(see attached image for reference)
View 0 Replies
View Related
Sep 18, 2013
I have a client that wishes to have the Revit 2014 file reverted back to 2013. I was told that I could send the 2014 file to Autodesk and they would be able to revert it back to 2013. Is this true?
View 2 Replies
View Related
Apr 22, 2013
Wondering if there is a way to revert a powerclip frame back into an object (vector path).
If there is no feature I would like to request that in the next "upgrade" of CorelDraw. As it is now I am forced to use time consuming workarounds to complete my illustrations when they are ready for production.
What was the reason to get rid of the usual powerclipping such as it was in X5?
View 3 Replies
View Related
Nov 5, 2013
I have somehow pressed a wrong button, and have switched my color-picking pallatte to a new one that I don't particulaly care for (see images); is there a way to revert back to the old color picking pallatte?
Old Color Picker (that I want to use):
New Color picker (that I do not want to use):
View 2 Replies
View Related
Jan 10, 2013
How do I revert back to an older autosaved project? I can't launch my current project. I was working away, in a cfx on my timeline, smoke crashed. I tried to log back in and now it just crashed every time.
View 4 Replies
View Related
Feb 16, 2012
I was working with a document in PS and I must have inadvertantly done something to turn my background sceen to black. How do I return it to the standard white?
View 2 Replies
View Related
Apr 22, 2011
Here is an image of the broken script editor, Maya works fine I cannot figure out how to restore the script editor
I cannot type in it, I cant copy any script or edit anything.
I'm using Maya 2011, it was working fine up until about a week ago and I dont think I made any changes that would have caused this.
I also have a copy of 2008 installed and 2012 installed the script editor works normal in both, all valid copies, no cracks.
I have unistalled and re-installed 2011 several times, replaced preference folders, deleted them, replaced them with my working user preferences in both 2008 and 2012 and no luck, so I dont think it has to do with those files.
I'm in school and we have specific plugin that has not been updated for 2012 so I cannot get my animation tools to work with 2012 until they do an update. (I've tried working around that and moving the plugins but I'm not a hacker/programer/coder so just moving the plug-in to the correct 2012 folder didnt work)
How to restore the script editor to its original state? Uninstall and re-install did not work.
View 7 Replies
View Related
Aug 5, 2010
I am currently working on a template for a belt conveyor, everything works fine, except for one small detail. I have flip states to relocate the drive. The issues im having is IF the drive is flipped before the width of the table is set, the drive does not end up in the proper place.
I have the mirror lines for the flip states stay centered on the table. I know what needs to be done, which is allow the drives to be stretched only when they are in certain locations. Im just not sure how to do this.
Attached is the file. I am currently using AutoCAD 2009 (this would be much easier with Parametric Constraints) (The block needing work is "Drive Table")
View 3 Replies
View Related
Aug 13, 2012
crashes in VSX2 (and all previous versions for that matter). At Corel's suggestion I installed the trial version of X5. In the meantime, I had my X2 working a lot better.
But I thought I'd take a look at X5 and see how it looked, since I'd gone to all the trouble of installing it. In order to try it out, I opened some of my projects and played with them a bit. I didn't mean to save them, but apparently I must have because now I can no longer open them in X2. Windows explorer thinks they are X2 project files, but when I try to open them in X2 nothing comes up. Then I try to open them in X5, and sure enough there they are. Project properties confirms they are now X5 project files. I tried to do a save as, but the only options are X5, X4 and X3. No choice for X2.
This is a problem because I haven't decided if I want to buy X5 or not. If I do, fine, but I don't want to be forced into it just so I can work on my old projects. Is there any way to convert them back to a format that X2 will open?
View 4 Replies
View Related
Jun 7, 2013
In our drawing office we use Inventor in a mining materials handling environment. Our output is mainly structural drawings where we require a bill of materials as part of creating a drawing. Whenever I insert a BOM in the drawing environment I get this table which is labeled in a foreign language (it looks like an Eastern European language) and the format is not as per the standard Autodesk installation setup.
How do I either revert back to the standard setup or do a BOM setup from scratch?
We use IV 2013 Professional on Windows 7 64 bit.
View 1 Replies
View Related
Jun 15, 2011
I wanted to combine two images one needs to be fit to the scale of the background image. So basically I followed the instructions.
Open up your background layer which was 800x600 landscape photo.
Then I imported my other image which was 600x800 portrait photo too. Layers -Import from file. I resized it then copied into a new layer. That was fine.
The problem is as soon as the new image is imported, the background image changes so that it only takes up half of the canvas. So now I've got a white area for half of the canvas. I can't seem to change this.
View 2 Replies
View Related
Mar 7, 2012
I encounter a problem, that i mistakenly change one block in a drawing(which i dont remember now) but it effects all the drawings which are using the same block and changed all of them.
Is it possible to change it all back to original. I dont remember how i did it in first place.
View 1 Replies
View Related
Nov 1, 2013
I opened up a file to use the same size to make another project...i saved the project instead of saving as to save the project as a different document. therefore the old project i made on that document disappeared i was hoping that there was a history panel or something i can go back to what the document was when i opened it..
I still have the document opened - never closed it since i opened it to do some other project.
- In photoshop i can just to history and clikc on the thumbnail to reset everything as it was before. I don't want to loose my layers from that older project.
View 2 Replies
View Related
Jan 1, 2014
I wanted to create a new calander for 2014, so I created a new catalog and started to import 25 images which were in my library in various folders. once I was done with the selections I could see that there are several catalogs set up from each folder of origin. if I click on library to get out of the "catalog" mode nothing happens. I can no longer see any of my library folders on the left panel, unless I try to import more images.
How do I delete or cancel this request to add a catalog and get back to my original library? also, in hind sight, I believe I wanted to add a "collection". please confirm the difference between a collection, smart collection and a catalog.
View 1 Replies
View Related
Nov 24, 2012
I need to revert to GIMP version 2.6. proper BASH commands to do this in an Ubuntu system.
Evidently I am not the "power-user" type for whom the GIMP team designed their 2.8 version. I only have about 20,000 photos, and I need to revise the JPGs or preferably work with PNGs. I tried resetting the keybinding to "overwrite," but even so, every time I close a file (about 25 x/day) it warns me that I have unsaved changes--because the GIMP PolitBuro has decided that only XCF is worthy, not my miserable uncompressed PNG (which is what I can use for my academic presentations. Default image viewers in Ubuntu/Kubuntu/Xubuntu don't read the XCF format).
So I need to revert to version 2.6 in a responsible way (repositories, dependencies, etc) while I wait for a fork to emerge so that I can switch to a full-featured raster editor designed by a less-condescending team of developers.
View 6 Replies
View Related
Feb 21, 2014
Is there a way to convert a pattern back to it's original form? I know that you can edit a pattern, once it has been created, but what about reverting back to the starting point?
I have a student who created a rather complex drawing and then converted it to a pattern, the design does not work well, because it is too elaborate, he has three different art pieces. A record, a jukebox and a piano. These are all great illustrations on their own, but do not make a good pattern. Is there a way to undo the pattern?
View 4 Replies
View Related
May 26, 2012
So I was making some pics less blurry using a method invloving grain extract, and in one pic I forgot a step and saved it in its grain extract mode. Is there any way to change the picture back into its original? It's too late to just press undo since I already closed GIMP.
View 1 Replies
View Related
Nov 19, 2012
I prefer to use the keyboard shortcut CTRL+< for step backwards and SHIFT CTRL+> for step forwards in the Application Menus > Edit. After changing to these shortcuts I save them but each time I restart Photo-show they have changed back to their original settings. How can I stop this happening?
View 3 Replies
View Related
Feb 21, 2013
I imported 900 RAW images from my desktop into Lightroom, edited them, renamed the filename, and exported them into JPGs. Since I no longer needed the RAW images on my desktop I moved them over to an external hard drive. So now the images are still visible in my Lightroom catalog, but there is no photo to back it up since I moved the original files to the external hard drive. After realizing that I exported the images at 150 dpi instead of 300 dpi I need to re-export the images from lightroon at the proper resolution. But since I moved the originals to the external hard drive there is no photo to back it up in lightroom anymore. So I went to locate the files by clicking on the "?" but since I renamed the file when I exported them, the original filename on the external hard drive is now different from the filename in the catalog. Is the only solution to locate the file one by one? Is there any way I can do them all at once even though the original filename is different from the filename in my lightoom catalog? The original filename is still listed in the metadata, but since the originals are missing it can't change it back.
View 7 Replies
View Related
Jul 22, 2012
How do you get back to your original image after you have made adjustments, closed Lightroom, made more adjustments, closed Lightroom etc?
View 4 Replies
View Related
Nov 22, 2012
I have made 15 moves in crop mode ( photoshop ) and i can't get original file back, how can i get back from crop mode.
View 5 Replies
View Related
