AutoCad :: Revert Hatches To Original Scale / Patterns
Jan 9, 2012
Upon starting up 2012 MEP I was asked if I would like to convert hatches with too small a scale to solid so as to safe virtual memory. I turned this on, and now I'm noticing some runs of piping showing up as solid. I would rather not have this seemingly random solid hatch all over my drawings.
Is there a way to go revert the hatches to their original scale/patterns? I'd selected the temporary option, however whenever I open the file now it shows as shown in the picture.
(see attached image for reference)
View 0 Replies
ADVERTISEMENT
Apr 26, 2013
Is there a quick way to revert an edited BOM back to the original quantities before they were edited?
View 2 Replies
View Related
Apr 5, 2012
I have this complex section of an architectural project, which is drawn at 1:1 scale (obviously). It has lots of constructive details, however i've made lots of layers and everything is under control.However, as I started to hatch the drawings, i was having big problems at using the same drawing for different scales, because non-annotative hatches also change their size with different scales.
So I began trying annotative, and i did it as i read in several how-tos. I made an hatch in the layout to know the perfect scale for the hatch, then applied that scale in model hatches. Then, in properties, I selected the scales at which that hatch should belong. Until here everything was OK!
However, as the ideal scale for the hatches (ANSI31) was something like 0.0003, here started the problems. The layout has an erratic behavior with similar hatches (I even tried to use match props to be sure different hatches had the same properties). On different viewports, some of the hatches appear as solid, and they plot just like that! As I zoom in and zoom out, the problem changes, as problematic viewports become right and others become wrong.
I tried to change HPmaxlines to 10000000, i tried to change the size of ansi31 in acad.pat, however the problem persists. It seems that the problem disappears when i have increase the hatch scale to, lets say, 0.05, however it's not that scale I want because of the presentation...
View 3 Replies
View Related
Mar 21, 2012
Using Photoshop CS5.5 I am at a loss to find the means to discard all edits in Camera Raw and revert back to the original photo.
View 4 Replies
View Related
Aug 29, 2012
The new clone tool in CS6 shows you what you will be transferring to the photo. I find this distracting at times. Is there any way to revert to the original use of the clone tool where the transferred portion does not show up?
View 3 Replies
View Related
Dec 11, 2012
I am using Iphoto with PSE11 but when I save the edited (JPG) image it will not let me revert to the original image. If I select the saved photo with Iphoto it will only let me re-edit it with an external editor (PSE11). This works fine but I can't "Revert to Original" in PSE11. If I try to re-edit it with Iphoto which has the "Revert to Original" button I get the message "Photo edited in an external editor so can't be edited in Iphoto. Duplicate photo to edit in Iphoto". If I do this I still cannot get back to the original unedited picture.
There is an obvious way to get round this by duplicating the original image before doing any external editor editing but there must be an automatic way which I am missing.
View 9 Replies
View Related
Jan 31, 2013
I'm working in a dwg and any hatch pattern displays solid. I've changed the scale to various sizes, and tried multiple different hatches, but they all show solid. This is the first time I'm working in metric scale, but if this is the issue, my measurement system variable is set to 1 and my units are set to metric.
View 1 Replies
View Related
Mar 1, 2013
After hours of work, working on an Aircraft Repaint, I somehow managed to move the template so that all of the lines (in this case the 'livery lines') became out of 'sync' In other words the layers became out of line. Went to load it into my editor and every thing was all over the place
The Q is...is there a quick way to get the template/Canvas or whatever to revert back to it's original state. i.e. everything within there parameters?
View 3 Replies
View Related
Oct 6, 2013
Almost every time I make changes to a photo and go to save them it reverts back to the original after I update the name.
View 5 Replies
View Related
Aug 24, 2012
Rotated images don't always stay in new rotated position. Revert back to original orientation?
View 1 Replies
View Related
Oct 15, 2012
I am having nearly 30 to 20 flatpatterns in .dxf format I just want to confirm whether the scale is 1:1 or not that just a cross verification. What is the best practice to check?
View 4 Replies
View Related
Jun 19, 2012
I am working with surveying points and what I used to do was insert the dxf file containing the points to my drawing and they would be inserted with their correct scale. However, now in AutoCAD 2013, when I insert them they are in a different scale and I must adjust them. Is there anyway to have their original scale carry over in 2013?
View 4 Replies
View Related
Feb 19, 2013
I drag the graphed box to scale an image down (or up) and after clicking "scale" the image size decreases but the original box is there (original size). Why?
View 5 Replies
View Related
Jan 16, 2013
How to compare two hatches are coincidence by use.
View 1 Replies
View Related
May 29, 2013
I'm trying to hatch the attached drawing (extracted from the actual drawing) with two separate hatches,
Now the quickest way is to hatch both areas with the same hatch and then use the properties painter, on each separate hatch, Unfortunately it's not hatching the areas separately.
View 9 Replies
View Related
Apr 13, 2012
I can't seem to insert any hatches into my drawing except for a SOLID hatch. Attached is the .dwg
View 3 Replies
View Related
Oct 11, 2012
How to add hatches to finished hatches in the classic view of autocad. in older versions if you needed to edit / add hatch you would double click on the hatch and the hatch dialog box would come up. then you would pick new points to add. How to do this in 2013 cant find any answers on the web.
View 1 Replies
View Related
Feb 1, 2013
Normally you can do this with hatchedit -> options -> create separate hatches.
also "HPSEPARATE" on the command.
How can I separate the already drawn hatches in a drawing with vba?
I can't find such a method.
View 2 Replies
View Related
Jan 9, 2013
I started with AutoCAD 9.I thought that until recently, that I could draw a line from parts of a hatch.
I could draw a line perpendicular to a hatch line.Or, I could draw a line from an intersection of hatch lines.Did I change a setting?Or have I imagined being able to do such?
View 9 Replies
View Related
Dec 7, 2011
Often i hatch two areas separately. is there any way to combine 2 adjacent hatches? for e.g. there are two adjacent rectangles which are hatched with same pattern having the same scale. if i make the shape into a one single rectangle by trimming the middle line, i want to combine the two hatch into a one single hatch.
View 6 Replies
View Related
Aug 7, 2012
I have a path shape that curves through the property, and I would like the hatch (which are just 60x60cm squares) follow the curve of the path instead of being applied like a pattern (just orthogonally).
View 5 Replies
View Related
Oct 7, 2009
Quite often I recieve drawings with loads of hatches/solid fills in. For example a housing layout with all of the houses, trees, roads, grass etc hatched.
I generally want to delete these/turn them off and work with a line drawing.
Sometimes the hatches have been drawn on their own layer, so turning them off is simple. But sometimes they've been drawn on layers with other things I want to keep. Genereally there are loads of hatches, so deleting them one by one is frustratingly slow.
I used to use Microstation, and in that there was a tool to delete hatches or fills, and if you selected all items you could delete the lot in one go. Is there such a tool in AutoCAD?
View 9 Replies
View Related
Dec 4, 2013
Today i had to use hatch a lot, the mission was to hatch extended and and walls that not with different hatch types.
the first thing that came up is to use wipeuot under the hatch, but its lots of work and time waste (wipeout objects never been plot-friendly).
what do you do when you have to hatch overlapping objects.
View 2 Replies
View Related
Jul 25, 2012
how add the hatches back in the AutoCAD 2004
When I enter the Hatch command I get the following message.
Command: h
HATCH
Enter a pattern name or [?/Solid/User defined] <ANSI31>: *Cancel*
Then the program closest by itself.
View 1 Replies
View Related
Jul 31, 2012
The orange items in question are blocks and are just copies of each other. However, the grass hatch underneath shows through the left one and not the right one. I checked the properties of both blocks and they are identical except for x/y position.
View 8 Replies
View Related
Nov 30, 2012
I have this railing I want to hatch. I use solid color to hatch to keep the background from showing, but the outlines of the windows in the background shows through the hatch no matter what I do.
View 7 Replies
View Related
Jun 28, 2012
I created a pipe network in civil3D and now I want to insert it as an xref in an autocad file. The problem is that when I do so, I lose some properties, such as the hatches in the directional arrows of the pipes and the background mask property of the structure labels.
View 2 Replies
View Related
Sep 4, 2013
I am having an issue with a window not inserting properly into a wall, or rather with the wall materials showing behind the window in seemingly random locations. I am using a modified version of a standard wall style and have tried several different types and lengths of windows with the same result in this location. I am attaching a screenshot.
View 5 Replies
View Related
Mar 26, 2012
a) can send me geological elements hatching patterns in .PAT format to g.jamalashvili@gmail.com (e.g. hatch for tuffs, basalt, tuff breccia, andesite, dacite, diabase, etc), or
b) Websites where I can dowload them or otherwise buy them quickly...
View 9 Replies
View Related
May 16, 2012
From DWG files exported off Vectorworks, in Model Space my lines are interrupted with blank area which are non removable, unpickable. If I move my drawings in MS theses black areas stay in place, the problem is: I can drag my drawing away from them but without seeing them, where they are. In Paper Space, these invisible hatch turned into grey area in random location and as grey background behind Elevation Benchmark (circle+text), room text, floor section.
How to reveal and delete these ghost Hatchs?
View 2 Replies
View Related
Nov 7, 2012
usingacasd 2010 inmy company we get drawing from others , most of the time we need to use the CTBto gray out others plane and emphasize our drawing on top of it., everything isgrayed out as expected but hatches and poliline which have big "global weight"property will still appear emphasize. i tried to screen out 50 percent of thepen , it effects the hatch but also the other vectors so they can be hardlyseen. howcan i have hatches and global weight poliline grayed out like all othervectors?
View 9 Replies
View Related
