AutoCad :: Combining Two Adjacent Hatches

Dec 7, 2011

Often i hatch two areas separately. is there any way to combine 2 adjacent hatches? for e.g. there are two adjacent rectangles which are hatched with same pattern having the same scale. if i make the shape into a one single rectangle by trimming the middle line, i want to combine the two hatch into a one single hatch.

View 6 Replies


ADVERTISEMENT

AutoCAD Map 3D :: Merging Non Adjacent Polygon According To Their Zone

Dec 12, 2013

I've 2 FDO Layer (polygon). Layer1 contains zoning and Layer2 contains small area. The goal is to merge all polygons (1 or more) of Layer2 into only 1 polygon in each zone of Layer1.

I can do an FDO Overlay (Identity) to copy ID of zone to Layer2, but I don't know (except manually) how to merge polygons with 1 common information.

View 9 Replies View Related

AutoCAD Civil 3D :: Maximum Angle Between Adjacent TIN Lines

Sep 12, 2012

I am trying out this option, and am noticing that whenever I close and reopen the drawing with a surface that uses this option, it resets my maximum angle from whatever I have it set to, to 90 degrees. Am I missing some setting that defaults the max angle to 90 degrees on drawing open? Or is something else going on here?

View 8 Replies View Related

AutoCAD Inventor :: Get Lines To Project Onto Adjacent Wall At Same Level

May 30, 2013

I'm modelling liner plates on a conveyor chute and I want the liners and the fixing bolts to align on between the walls which are different. angles.

I've modeled the liners on the first wall how I want them and now want to project lines from the top and bottom of the liner plates as well as the centers of the bolt holes on this wall to the adjacent wall.

I cant seem to get the lines to project onto the adjacent wall at the same level.

I've posted two images of the model that hopefully illustrate the problem. I would love to put a zipped folder of the model up to which is under 3MB in size but I keep getting an error message saying the size of the attachment is too large and that the maximum size is 1,572,864 bytes. 

View 4 Replies View Related

AutoCAD Civil 3D :: Points Automatically Placed Adjacent And Perpendicular To An Alignment?

Aug 20, 2013

I need to place points automatically and in order sequentially along an alignment and I need to generate data from the points relative to an adjacent alignment. SO, two alignments, adjacent but not parrallel to each other. The data would then be point #, sta and offset from the adjacent alignment with the points placed in order and by window or crossing. I have a few thousand to place so one at a time would be an undesireable solution of course.

View 1 Replies View Related

AutoCAD 2013 :: Intersect Two Endpoints Of A Line With Two Adjacent Lines

Apr 19, 2013

The green line is parallel with the blue line. I want to move the green line upwards until its endpoints intersect with the two red lines.

View 9 Replies View Related

AutoCAD Map 3D :: Adjacent Arrow In Map Template File Underneath Block

Mar 9, 2013

In my map book template 8.5 x 11 Elegant file when I inset it in a mapbook the adjacent arrows are underneath the block I have to go to the template right click go to draw order and pick send to front. I went to the template file went to block editor to make these same changes there and had no effect.

View 3 Replies View Related

AutoCAD Civil 3D :: Does Adjacent Elevations By Reference Work Only With Parallel Features

Aug 29, 2013

I have two feature lines. They are not parallel.

The tool "Adjacent elevations by reference" seems to work fine only when feature lines are well parallel one to another ? 

Also, it seems that C3D method works fine if  "parent" object  and "object to edit " have similar number of vertex, similiar "lenght",.... 

View 1 Replies View Related

AutoCAD Civil 3D :: Merge Two Or More Adjacent / Overlapping Surfaces Into Single Surface?

Jun 5, 2012

Is it possible to merge two or more adjascent / overlapping surfaces into a single surface?Is it possible to "Delete" multiple surfaces in one go?

View 2 Replies View Related

AutoCAD .NET :: How To Compare Two Hatches

Jan 16, 2013

How to compare two hatches are  coincidence by use.

View 1 Replies View Related

AutoCAD LT :: Hatches Will Not Be Separate

May 29, 2013

I'm trying to hatch the attached drawing (extracted from the actual drawing) with two separate hatches,

Now the quickest way is to hatch both areas with the same hatch and then use the properties painter, on each separate hatch, Unfortunately it's not hatching the areas separately.

View 9 Replies View Related

AutoCad 2D :: Hatches Don't Appear In Drawing?

Apr 13, 2012

I can't seem to insert any hatches into my drawing except for a SOLID hatch. Attached is the .dwg

View 3 Replies View Related

AutoCAD 2013 :: How To Add Hatches

Oct 11, 2012

How to add hatches to finished hatches in the classic view of autocad.  in older versions if you needed to edit / add hatch you would double click on the hatch and the hatch dialog box would come up. then you would pick new points to add. How to do this in 2013 cant find any answers on the web.

View 1 Replies View Related

AutoCAD VB :: How To Separate Hatches In A Drawing

Feb 1, 2013

Normally you can do this with hatchedit -> options -> create separate hatches.

also "HPSEPARATE" on the command.

How can I separate the already drawn hatches in a drawing with vba?

I can't find such a method.

View 2 Replies View Related

AutoCAD 2010 :: Drawing From Hatches

Jan 9, 2013

I started with AutoCAD 9.I thought that until recently, that I could draw a line from parts of a hatch.

I could draw a line perpendicular to a hatch line.Or, I could draw a line from an intersection of hatch lines.Did I change a setting?Or have I imagined being able to do such?

View 9 Replies View Related

AutoCad :: Hatches That Follow A Path?

Aug 7, 2012

I have a path shape that curves through the property, and I would like the hatch (which are just 60x60cm squares) follow the curve of the path instead of being applied like a pattern (just orthogonally).

View 5 Replies View Related

AutoCad :: Delete All Hatches Within A Drawing?

Oct 7, 2009

Quite often I recieve drawings with loads of hatches/solid fills in. For example a housing layout with all of the houses, trees, roads, grass etc hatched.

I generally want to delete these/turn them off and work with a line drawing.

Sometimes the hatches have been drawn on their own layer, so turning them off is simple. But sometimes they've been drawn on layers with other things I want to keep. Genereally there are loads of hatches, so deleting them one by one is frustratingly slow.

I used to use Microstation, and in that there was a tool to delete hatches or fills, and if you selected all items you could delete the lot in one go. Is there such a tool in AutoCAD?

View 9 Replies View Related

AutoCad :: Best Way To Handle Overlapping Hatches

Dec 4, 2013

Today i had to use hatch a lot, the mission was to hatch extended and and walls that not with different hatch types.

the first thing that came up is to use wipeuot under the hatch, but its lots of work and time waste (wipeout objects never been plot-friendly).

what do you do when you have to hatch overlapping objects.

View 2 Replies View Related

AutoCad :: How To Add Hatches Back In 2004

Jul 25, 2012

how add the hatches back in the AutoCAD 2004

When I enter the Hatch command I get the following message.

Command: h
HATCH
Enter a pattern name or [?/Solid/User defined] <ANSI31>: *Cancel*

Then the program closest by itself.

View 1 Replies View Related

AutoCad :: Hatches Showing Through Objects

Jul 31, 2012

The orange items in question are blocks and are just copies of each other. However, the grass hatch underneath shows through the left one and not the right one. I checked the properties of both blocks and they are identical except for x/y position.

View 8 Replies View Related

AutoCad :: Create Layered Hatches

Nov 30, 2012

I have this railing I want to hatch. I use solid color to hatch to keep the background from showing, but the outlines of the windows in the background shows through the hatch no matter what I do.

View 7 Replies View Related

AutoCAD Inventor :: Drill Holes In Cupboard Panels For Dowel Connection - Adjacent Faces?

Jul 4, 2012

I want to make a new function in my own add-in to drill holes in cupboard panels for a dowel connection.  

I used to make holes in other "own" functions where the user selects the faces.   

In this function the user must select 2 parts in an assembly and then find the adjacent (planar) faces.  I need this faces to make the sketch for the holes.

How to find these adjacent faces?

View 1 Replies View Related

AutoCAD Civil 3D :: Losing Hatches After Xref

Jun 28, 2012

I created a pipe network in civil3D and now I want to insert it as an xref in an autocad file. The problem is that when I do so, I lose some properties, such as the hatches in the directional arrows of the pipes and the background mask property of the structure labels.

View 2 Replies View Related

AutoCad 2D :: Wall Hatches Showing In Windows?

Sep 4, 2013

I am having an issue with a window not inserting properly into a wall, or rather with the wall materials showing behind the window in seemingly random locations. I am using a modified version of a standard wall style and have tried several different types and lengths of windows with the same result in this location. I am attaching a screenshot.

View 5 Replies View Related

AutoCAD 2010 :: Hatches For Geological Units?

Mar 26, 2012

a) can send me geological elements hatching patterns in .PAT format to g.jamalashvili@gmail.com (e.g. hatch for tuffs, basalt, tuff breccia, andesite, dacite, diabase, etc), or

b) Websites where I can dowload them or otherwise buy them quickly...

View 9 Replies View Related

AutoCad 2D :: How To Reveal And Delete Ghost Hatches

May 16, 2012

From DWG files exported off Vectorworks, in Model Space my lines are interrupted with blank area which are non removable, unpickable. If I move my drawings in MS theses black areas stay in place, the problem is: I can drag my drawing away from them but without seeing them, where they are. In Paper Space, these invisible hatch turned into grey area in random location and as grey background behind Elevation Benchmark (circle+text), room text, floor section.

How to reveal and delete these ghost Hatchs?

View 2 Replies View Related

AutoCad :: Controlling Hatches And Polylines With Lineweight

Nov 7, 2012

usingacasd 2010 inmy company we get drawing from others , most of the time we need to use the CTBto gray out others plane and emphasize our drawing on top of it., everything isgrayed out as expected but hatches and poliline which have big "global weight"property will still appear emphasize. i tried to screen out 50 percent of thepen , it effects the hatch but also the other vectors so they can be hardlyseen. howcan i have hatches and global weight poliline grayed out like all othervectors?

View 9 Replies View Related

AutoCad :: DGN Hatches Clogging Up Hatch System

Oct 29, 2012

I've recently started working with a colleague who uses Microstation. Since importing .dgn files into AutoCAD, my list of hatches seems to have increased exponentially, with many of the new hatches being similar in appearance and having names prefixed '_dgn'.

I'm now finding that scrolling through the list causes my computer to crash.Even when starting a new drawing, these hatches are on the list, and the purge command does not have 'hatches' on the list. How I can manage these hatches?

View 4 Replies View Related

AutoCAD 2010 :: Annotative Hatches - Different On Layout At Same Scale

Apr 5, 2012

I have this complex section of an architectural project, which is drawn at 1:1 scale (obviously). It has lots of constructive details, however i've made lots of layers and everything is under control.However, as I started to hatch the drawings, i was having big problems at using the same drawing for different scales, because non-annotative hatches also change their size with different scales.

So I began trying annotative, and i did it as i read in several how-tos. I made an hatch in the layout to know the perfect scale for the hatch, then applied that scale in model hatches. Then, in properties, I selected the scales at which that hatch should belong. Until here everything was OK!

However, as the ideal scale for the hatches (ANSI31) was something like 0.0003, here started the problems. The layout has an erratic behavior with similar hatches (I even tried to use match props to be sure different hatches had the same properties). On different viewports, some of the hatches appear as solid, and they plot just like that! As I zoom in and zoom out, the problem changes, as problematic viewports become right and others become wrong.

I tried to change HPmaxlines to 10000000, i tried to change the size of ansi31 in acad.pat, however the problem persists. It seems that the problem disappears when i have increase the hatch scale to, lets say, 0.05, however it's not that scale I want because of the presentation...

View 3 Replies View Related

AutoCAD 2013 :: Printing PDF - Titleblock And Some Hatches Don't Show Up

Jan 10, 2013

Whenever I plot this perticular dwg to a pdf, the pdf comes out perfectly fine. But when I go to print the pdf... the titleblock and some hatches don't show up. All the hatches are on the same layer and the titleblock is xrefed in the same as all the other sheets in the set, which all are fine as well.

View 2 Replies View Related

AutoCAD LT :: Hatches For Expanded Metal And Mesh-types?

Jul 31, 2012

Where would I find some hatches for expanded metal and mesh-types? Everything looks good on paper.... its why we use CAD.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved