AutoCad 2D :: Hatches Don't Appear In Drawing?
Apr 13, 2012I can't seem to insert any hatches into my drawing except for a SOLID hatch. Attached is the .dwg
View 3 Replies
ADVERTISEMENT
AutoCAD VB :: How To Separate Hatches In A Drawing
Feb 1, 2013Normally you can do this with hatchedit -> options -> create separate hatches.
also "HPSEPARATE" on the command.
How can I separate the already drawn hatches in a drawing with vba?
I can't find such a method.
AutoCAD 2010 :: Drawing From Hatches
Jan 9, 2013 I started with AutoCAD 9.I thought that until recently, that I could draw a line from parts of a hatch.
I could draw a line perpendicular to a hatch line.Or, I could draw a line from an intersection of hatch lines.Did I change a setting?Or have I imagined being able to do such?
AutoCad :: Delete All Hatches Within A Drawing?
Oct 7, 2009Quite often I recieve drawings with loads of hatches/solid fills in. For example a housing layout with all of the houses, trees, roads, grass etc hatched.
I generally want to delete these/turn them off and work with a line drawing.
Sometimes the hatches have been drawn on their own layer, so turning them off is simple. But sometimes they've been drawn on layers with other things I want to keep. Genereally there are loads of hatches, so deleting them one by one is frustratingly slow.
I used to use Microstation, and in that there was a tool to delete hatches or fills, and if you selected all items you could delete the lot in one go. Is there such a tool in AutoCAD?
AutoCAD .NET :: How To Compare Two Hatches
Jan 16, 2013How to compare two hatches are coincidence by use.
View 1 Replies View RelatedAutoCAD LT :: Hatches Will Not Be Separate
May 29, 2013I'm trying to hatch the attached drawing (extracted from the actual drawing) with two separate hatches,
Now the quickest way is to hatch both areas with the same hatch and then use the properties painter, on each separate hatch, Unfortunately it's not hatching the areas separately.
AutoCAD 2013 :: How To Add Hatches
Oct 11, 2012How to add hatches to finished hatches in the classic view of autocad. in older versions if you needed to edit / add hatch you would double click on the hatch and the hatch dialog box would come up. then you would pick new points to add. How to do this in 2013 cant find any answers on the web.
View 1 Replies View RelatedAutoCad :: Combining Two Adjacent Hatches
Dec 7, 2011Often i hatch two areas separately. is there any way to combine 2 adjacent hatches? for e.g. there are two adjacent rectangles which are hatched with same pattern having the same scale. if i make the shape into a one single rectangle by trimming the middle line, i want to combine the two hatch into a one single hatch.
View 6 Replies View RelatedAutoCad :: Hatches That Follow A Path?
Aug 7, 2012I have a path shape that curves through the property, and I would like the hatch (which are just 60x60cm squares) follow the curve of the path instead of being applied like a pattern (just orthogonally).
View 5 Replies View RelatedAutoCad :: Best Way To Handle Overlapping Hatches
Dec 4, 2013Today i had to use hatch a lot, the mission was to hatch extended and and walls that not with different hatch types.
the first thing that came up is to use wipeuot under the hatch, but its lots of work and time waste (wipeout objects never been plot-friendly).
what do you do when you have to hatch overlapping objects.
AutoCad :: How To Add Hatches Back In 2004
Jul 25, 2012how add the hatches back in the AutoCAD 2004
When I enter the Hatch command I get the following message.
Command: h
HATCH
Enter a pattern name or [?/Solid/User defined] <ANSI31>: *Cancel*
Then the program closest by itself.
AutoCad :: Hatches Showing Through Objects
Jul 31, 2012The orange items in question are blocks and are just copies of each other. However, the grass hatch underneath shows through the left one and not the right one. I checked the properties of both blocks and they are identical except for x/y position.
View 8 Replies View RelatedAutoCad :: Create Layered Hatches
Nov 30, 2012I have this railing I want to hatch. I use solid color to hatch to keep the background from showing, but the outlines of the windows in the background shows through the hatch no matter what I do.
View 7 Replies View RelatedAutoCAD Civil 3D :: Losing Hatches After Xref
Jun 28, 2012I created a pipe network in civil3D and now I want to insert it as an xref in an autocad file. The problem is that when I do so, I lose some properties, such as the hatches in the directional arrows of the pipes and the background mask property of the structure labels.
View 2 Replies View RelatedAutoCad 2D :: Wall Hatches Showing In Windows?
Sep 4, 2013I am having an issue with a window not inserting properly into a wall, or rather with the wall materials showing behind the window in seemingly random locations. I am using a modified version of a standard wall style and have tried several different types and lengths of windows with the same result in this location. I am attaching a screenshot.
View 5 Replies View RelatedAutoCAD 2010 :: Hatches For Geological Units?
Mar 26, 2012a) can send me geological elements hatching patterns in .PAT format to g.jamalashvili@gmail.com (e.g. hatch for tuffs, basalt, tuff breccia, andesite, dacite, diabase, etc), or
b) Websites where I can dowload them or otherwise buy them quickly...
AutoCad 2D :: How To Reveal And Delete Ghost Hatches
May 16, 2012From DWG files exported off Vectorworks, in Model Space my lines are interrupted with blank area which are non removable, unpickable. If I move my drawings in MS theses black areas stay in place, the problem is: I can drag my drawing away from them but without seeing them, where they are. In Paper Space, these invisible hatch turned into grey area in random location and as grey background behind Elevation Benchmark (circle+text), room text, floor section.
How to reveal and delete these ghost Hatchs?
AutoCad :: Controlling Hatches And Polylines With Lineweight
Nov 7, 2012usingacasd 2010 inmy company we get drawing from others , most of the time we need to use the CTBto gray out others plane and emphasize our drawing on top of it., everything isgrayed out as expected but hatches and poliline which have big "global weight"property will still appear emphasize. i tried to screen out 50 percent of thepen , it effects the hatch but also the other vectors so they can be hardlyseen. howcan i have hatches and global weight poliline grayed out like all othervectors?
View 9 Replies View RelatedAutoCad :: DGN Hatches Clogging Up Hatch System
Oct 29, 2012I've recently started working with a colleague who uses Microstation. Since importing .dgn files into AutoCAD, my list of hatches seems to have increased exponentially, with many of the new hatches being similar in appearance and having names prefixed '_dgn'.
I'm now finding that scrolling through the list causes my computer to crash.Even when starting a new drawing, these hatches are on the list, and the purge command does not have 'hatches' on the list. How I can manage these hatches?
AutoCAD 2010 :: Annotative Hatches - Different On Layout At Same Scale
Apr 5, 2012I have this complex section of an architectural project, which is drawn at 1:1 scale (obviously). It has lots of constructive details, however i've made lots of layers and everything is under control.However, as I started to hatch the drawings, i was having big problems at using the same drawing for different scales, because non-annotative hatches also change their size with different scales.
So I began trying annotative, and i did it as i read in several how-tos. I made an hatch in the layout to know the perfect scale for the hatch, then applied that scale in model hatches. Then, in properties, I selected the scales at which that hatch should belong. Until here everything was OK!
However, as the ideal scale for the hatches (ANSI31) was something like 0.0003, here started the problems. The layout has an erratic behavior with similar hatches (I even tried to use match props to be sure different hatches had the same properties). On different viewports, some of the hatches appear as solid, and they plot just like that! As I zoom in and zoom out, the problem changes, as problematic viewports become right and others become wrong.
I tried to change HPmaxlines to 10000000, i tried to change the size of ansi31 in acad.pat, however the problem persists. It seems that the problem disappears when i have increase the hatch scale to, lets say, 0.05, however it's not that scale I want because of the presentation...
AutoCAD 2013 :: Printing PDF - Titleblock And Some Hatches Don't Show Up
Jan 10, 2013Whenever I plot this perticular dwg to a pdf, the pdf comes out perfectly fine. But when I go to print the pdf... the titleblock and some hatches don't show up. All the hatches are on the same layer and the titleblock is xrefed in the same as all the other sheets in the set, which all are fine as well.
View 2 Replies View RelatedAutoCAD LT :: Hatches For Expanded Metal And Mesh-types?
Jul 31, 2012Where would I find some hatches for expanded metal and mesh-types? Everything looks good on paper.... its why we use CAD.
View 9 Replies View RelatedAutoCAD 2010 :: Too Low Density - Hatches Shows Up As Solid
Sep 27, 2011In Acad 2012 (sp1, w64), it seems that, if a hatch has a scale too big to have something showing into the boundary, it renders as a solid hatch ! (previously, it rendered empty, as expected).
The attached file demonstrates the issue, with "dots" hatch samples at various scales. You can see that, at scale 80, where no point should be visible, it becomes solid !
It's a major annoyance, since I have lots of lisp-based automatic hatching of things, and, while it's not a problem to have an empty hatch whenever the boundary is too small for a given scale, getting a solid hatch instead is a big no-no.
How to get rid of this ?
AutoCAD 2013 :: Hatches Doesn't Cover Lines?
Jun 13, 2013Why my Hatch doesn't cover my lines?
View 3 Replies View RelatedAutoCad :: Plotting Transparent Solid Hatches - 2011
Sep 6, 2011Lately I've been trying to plot a drawing with solid hatches of varying transparencies to pdf in Autocad 2011. I have plotted drawings like this successfully before, but with this particular document, the hatches are being rendered with a strange texture of horizontal lines as if printed by an inkjet printer running low on ink. An example is attached - all hatches should be smooth.
zone sections.pdf
I have experimented with some variables and found that it only happens when the layers containing these hatches have any value for transparency other than 0, regardless of whether they overlap.
I've tried copying just the lines and hatches shown in the attachment to a separate dwg and the result is the same.
AutoCad :: Revert Hatches To Original Scale / Patterns
Jan 9, 2012Upon starting up 2012 MEP I was asked if I would like to convert hatches with too small a scale to solid so as to safe virtual memory. I turned this on, and now I'm noticing some runs of piping showing up as solid. I would rather not have this seemingly random solid hatch all over my drawings.
Is there a way to go revert the hatches to their original scale/patterns? I'd selected the temporary option, however whenever I open the file now it shows as shown in the picture.
(see attached image for reference)
AutoCAD Architecture :: All Hatches Only Show As Solid Not Due To Zoom / Scale
Jan 31, 2013I'm working in a dwg and any hatch pattern displays solid. I've changed the scale to various sizes, and tried multiple different hatches, but they all show solid. This is the first time I'm working in metric scale, but if this is the issue, my measurement system variable is set to 1 and my units are set to metric.
View 1 Replies View RelatedAutoCAD 2010 :: Printing Transparent Hatches Maintaining Transparency?
May 16, 2012Is there a way of printing transparent hatches maintaining transparency?
It appears not to work in 2012. How about 2013 which I haven't yet installed?
AutoCAD Architecture :: Hatches From Tool Palette Come In On Wrong Layer?
Jan 2, 2014I have an issue where any hatch that I place on a tool palette comes in on the wrong layer. They all come in on the a-hatch-window layer despite the properties of the tool being set to the correct layer and the correct layer being present and being the current layer in the drawing.
View 5 Replies View RelatedAutoCad 2D :: Annotative Patterned Hatches Disappear Or Shrink In Particular Viewport
May 30, 2013Having some trouble with some annotative hatches. Notably ones with patterns in them? I am testing them out in multiple viewports of various scales and for the most part they work great. But every so often in a particular viewport they either disappear altogether or shrink to a smaller size and bring my AutoCAD to a dead crawl?
View 2 Replies View RelatedAutoCad :: Reduce PDF File Size - Hatches Affected By Dropping DPI
Mar 9, 2013So in an effort to reduce PDF file size, I went to the dwg to pdf.pc3 plot driver and wen tot he custom properties. The dpi is set to:
600
400
400
400
I dropped the top number to 400 and the stucco hatch and AR-Sand hatch both print weird when we print to PDF. Some of the hatch is fine, some comes out too dark. It's pretty weird. If I leave the settings as the default then it prints perfectly fine.
Why those hatches might be affected by dropping the dpi? Everything else appears to print great and the file size is reduced.