The new clone tool in CS6 shows you what you will be transferring to the photo. I find this distracting at times. Is there any way to revert to the original use of the clone tool where the transferred portion does not show up?
View 3 RepliesUsing Photoshop CS5.5 I am at a loss to find the means to discard all edits in Camera Raw and revert back to the original photo.
View 4 Replies View RelatedI am using Iphoto with PSE11 but when I save the edited (JPG) image it will not let me revert to the original image. If I select the saved photo with Iphoto it will only let me re-edit it with an external editor (PSE11). This works fine but I can't "Revert to Original" in PSE11. If I try to re-edit it with Iphoto which has the "Revert to Original" button I get the message "Photo edited in an external editor so can't be edited in Iphoto. Duplicate photo to edit in Iphoto". If I do this I still cannot get back to the original unedited picture.
There is an obvious way to get round this by duplicating the original image before doing any external editor editing but there must be an automatic way which I am missing.
Almost every time I make changes to a photo and go to save them it reverts back to the original after I update the name.
View 5 Replies View RelatedRotated images don't always stay in new rotated position. Revert back to original orientation?
View 1 Replies View RelatedUpon starting up 2012 MEP I was asked if I would like to convert hatches with too small a scale to solid so as to safe virtual memory. I turned this on, and now I'm noticing some runs of piping showing up as solid. I would rather not have this seemingly random solid hatch all over my drawings.
Is there a way to go revert the hatches to their original scale/patterns? I'd selected the temporary option, however whenever I open the file now it shows as shown in the picture.
(see attached image for reference)
Any way to turn an object that has been used as a master (parent object) or its resulting clone back into a normal object?
View 10 Replies View RelatedCould not use the clone stamp tool because the area to clone has not been defined (option-click to define a source point). this is what shows up in the command box when ever I click to start to pick the spot i want to use as the clone. makes my cloning tool useless. I have reset the tools restrted my computer.
View 1 Replies View RelatedIs there a quick way to revert an edited BOM back to the original quantities before they were edited?
View 2 Replies View RelatedAfter hours of work, working on an Aircraft Repaint, I somehow managed to move the template so that all of the lines (in this case the 'livery lines') became out of 'sync' In other words the layers became out of line. Went to load it into my editor and every thing was all over the place
The Q is...is there a quick way to get the template/Canvas or whatever to revert back to it's original state. i.e. everything within there parameters?
clone tool has worked fine, but now it does not select an area to clone from?
View 1 Replies View RelatedI'm trying to use the clone tool to erase creases around an eye.
I have the layer with the eye in it active, I choose the clone tool, I hit CTRL and click the area of flesh around the eye I want to copy, I see a moving outline of the flesh that's being copied, It works spiffingly! I change brush size to work in a smaller area, I hit CTRL and click the area of flesh I want to copy, I see a moving outline of the flesh I want to copy, But nothing! My cursor moves, but no cloning going on.
This has been plaguing me for a while but I've had projects going that I didn't want to interrupt. It's gotten to the point that I just can't take it anymore. I really need the clone tool for this phase of this project
My clone tool seems to have been replaced by the pattern stamp tool. How to get it back and how that happened?
View 3 Replies View RelatedI have been away from PhotoShop for awhile and have not used CS3 for over a year. When I try to use the clone tool a pop up tells me unable to use tool due to a program error. How can I fix?
View 1 Replies View RelatedI press control Clone stamp, click on the area I want
I then let go and click another area to clone
Is it possible to clone multiple times (without going back to the original area)
I am finding some inconsistencies when using tools provided in Paint.NET.
For 2 examples, I'll simply describe the behavior of the Escape key.
-----------
Exhibit A:
I would like to use Text to type in some letters with different colors. What I would do is press T (shortcut key for Text), select a color, type a letter, press ESC, nothing happened, click somewhere else, click back to the letter, select a different color, type a letter, ESC, nothing happened, repeat...
After I'm done, I press ESC again with nothing happening, and press a different shortcut key to continue editing, like O (shortcut key for Line/Curve).
Exhibit B:
I would like to draw a circle and a line. After finish typing, I press O four times to use the Ellipse tool, draw a circle, and then press ESC. Nothing happened. Next, I press O once to use the Line tool, start drawing a line, and then press ESC. At this point, my drawn line is canceled for good, and I need to either use Redo to recover it, or redraw the line again.
------------
Here I present to you these two exhibits. Notice that sometimes, pressing ESC does nothing other than jumping back to cursor, and sometimes cancelling the action that was done.
Would it be possible if the Escape key has a consistent action throughout all of the tools?
when i try to use either of them, instead of getting a SINGLE disc the same color as my sample point i get a blotch, containing MORE THAN ONE smudged discs. see example below. i didn't want mickey mouse ears, i wanted ONE disc.
View 3 Replies View RelatedI have a multi layered image where all the layers are of the same image with different effects. Is there a way I can align the clone source point to the same point on a different layer? I am using PS CS (version 1)
View 9 Replies View RelatedI'm just starting to use CS4 which has some nice little features, but also behaves differently with some tools. The clone tool is excellent because you can position the clone before you apply it (you can see where it is going), but how do you clear the clone brush ater you've cloned something. if you've used the clone tool in CS4 you'll know what I mean.
View 2 Replies View RelatedI do not have a full understanding of this tool. I am constantly bumping into what is trying to clone an area and not able to control boundries of the brush.
When I select a location from which I want to clone the pixel colors/properties and then begin to paint in the target location, the results are of pixels from areas that are outside of what I want, or thought I had selected.
I have reset tools, reset preferences, checked opacity, blending mode, made sure I am on a active layer, duplicated background layer, used a different file to see if the same result occurred, checked channels palette for rgb active. Done everything but re-install software,
View 4 Replies View Relatedhaving trouble with the clone tool in CS4 (PC, XP)? It just doesn't look or behave the way it does in previous versions.
View 6 Replies View RelatedI am using CS4, and my clone tool will act up every once in a while by cloning to an area that I have not gone over. I will be cloning and then when I start an area, nothing happens to the area cloned (the area I am trying to cover over with selected area), then suddenly another area of the photo will show the clone.
I have reset my settings by doing a CTRL, Shift, ALT at startup.
My son banged on my keyboard while I was in the middle of editing a photo using the clone tool. Now the tool is looks as though it's working when I'm sampling an area but when I go to change the designated area it isn't doing anything. And it's got a bright white spot in the circle.
View 1 Replies View RelatedI am familiar with the operation of the clone tool in previous versions of Photoshop.... However after upgrading to CS6 I am having a problem with the functionality of the clone tool.
Basically when using the clone tool when its set to 100% opacity & flow, it looks as though the clone tool is only set to 50% opacity.I am using the default configuration that came with the program.
My previous version was CS3... clone tool worked perfectly there...why the same tool doesnt perform the same way with the same apparent settings.
I only have a pattern stamp tool can't seem to find a clone tool anywhere... I thought it had both. when I click on the pattern stamp there is only that tool nothing else to select...is it a setting under the pattern tool? or is it somewhere else completely?
View 3 Replies View Relatedsome of these vertical and horizontal remnants remain. I can reclone and reclone, and the same horizontals will be there, sometimes a vertical changes if I reshape the selection. Even at the smallest selection size, it remains. I have tried rebooting and turning all memory hogs off (I have 12gb of ram).
View 9 Replies View RelatedIn both Photoshop 7 and Elements 2 running under Windows XP my machine hangs after a few clicks with the clone tool. Has anyone else had the same problem? And if so, is there a solution?
View 6 Replies View RelatedI`m using CS and recently developed a teaser. I can`t get the clone tool icon off the screen (when that tool is selected) and return to the size adjustable circle I have used up until now. Caps lock doesn`t help either.
View 3 Replies View RelatedI noticed for the first time that the new clone tool in CS4 is not using all of my processors on my new i7 965XE processor. In fact it uses only one processor and this makes it run incredibly slow. I have also noticed that CS4 in general is rather sluggish on this hardware which is supposedly one of the most powerful processors available. I am running the i7 965XE with 8GB of Ram and still find Photoshop rather slow. I would expect it to be super snappy on this hardware, perhaps I need to optimise settings somehow, does anyone have any suggestions or is CS4 not equipped to properly address the i7 processors yet?
My version of CS4 is 11.0
The clone and healing tools just stopped working on CS3, Windows XP. I check the obvious like correct layer selected, blend mode, ...
The paint tool works fine.