Revit :: Etransmit 2014 Will Not Send Any Links
Feb 17, 2014
I get the following error when trying to use etransmit on two different projects:"the following files could not be checked for links"..We use Revit Server. We have many projects which etransmit just fine from Revit Server.
I looked this up and the only info I found said that Revit Server is locking a link or links or the main file. I (and our IT dept) checked Revit Server for locking and did not find any issues. I have tried locating the consultant linked files on the Revit Server too.
View 3 Replies
ADVERTISEMENT
Jul 23, 2013
I am currently trying to etransmit or export one of our C3D drawings to CAD 2007 to send to a client. Every time I estransmit or export a lot of boxes appear on the exported file. Does anything know what they are or how to get rid of them? it won't let me freeze them, they all seem to be one block together.
View 3 Replies
View Related
Dec 8, 2011
I want to attach image in Autocad 2010, i know the procedure to insert the image (.jpg,etc.). But my problem is that i dont want to send its original image that i used from my hard disk.
Is there any way to send drawing without sending its image file or wothout doing etransmit the file.
View 1 Replies
View Related
Aug 16, 2013
I recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies
View Related
Jul 31, 2012
I receive this error when testing eTransmit for Revit 2013. "etransmit encountered an error while trying to contact the server". Oddly, it is only a problem with on host, and not the other.
View 3 Replies
View Related
Aug 13, 2013
Several buildings are linked and share coordinates. How can the host file be used as the datum base Finish Floor 0 and all the other buildings relate, even though at different elevations of floor levels? Right now the sections show FF 0 for all of them and they are at different heights.
View 1 Replies
View Related
Mar 20, 2012
Need to get rid of a couple of CAD links from a detail view, and only that view. How do I do this without potentially deleting the links from other views?
View 3 Replies
View Related
Sep 11, 2013
I have a request from an Architect to detach, purge and remove links from my model every time before I upload. I used to clean up received models (MEP 2008-2010) thinking it would increase performance. It's been a years since I have done this and my model performance behaves no differently. Is there any validity to his claims that this is beneficial on the Architectural side?
View 3 Replies
View Related
Jun 8, 2011
I can export from Revit to 3ds, and the materials come in, but all the material links are broken. How can I import the textures in to 3ds Max? I am trying to do an architectural walkthrough, btw.
View 1 Replies
View Related
Feb 11, 2010
I linked in a cad.dwg survey into my Revit model and I don't like the result. I'm trying to unload or remove the linked file now and I get an error message, "A serious error has occurred. It is strongly recommended that you use Save As to save your work in a new file before continuing."
Saving to a new file does not change this problem. I've tried cleaning up the survey file, moving the file to another location, changing from relative to absolute path. Revit shouldn't even be finding this file any more. Isn't linking similar to x-refing in AutoCAD?
How to get this dwg out of my Revit file?
View 3 Replies
View Related
Sep 4, 2013
I have been trying to send a render in cloud but the following message keep on appearing:
Si è verificato un problema (a problem occurred). Il servizio rendering non è stato in grado di completare la richiesta (the rendering service has not been able to complete the request).
which could be the problem and to get it solved?
View 2 Replies
View Related
Sep 12, 2011
We have several users utilizing the same printer. To prevent sheets from different jobs from mixing, and a large quantity of pages sitting in the printer, each print job is queued in the printer until the sender requests that it be printed at the printer. With Revit, the problem is that each sheet is sent as a separate print job, meaning that a 300 sheet print jobe requires me to stand at the printer and request that each one be printed (300 requests). In AutoCAD, the PUBLISHCOLLATE variable sends all sheets in a publish operation as a single job. Is there a way to do this in Revit 2011?
View 2 Replies
View Related
Apr 15, 2014
I'm reconstructing an old document originally developed with PageMaker. I've recreated a half dozen pages hopefully with more uniform techniques. The original line art for the pages was created in AutoCad and some were scans. To bring them into InDesign some of the art is now in psd format and some of the newer art is in Illustrator AI format.
I've noticed that the pages with photoshop art print pretty quickly (about 30 seconds). The ones with Illustrator art take much longer (about 1:30 seconds). They go through a flattening process.
I print these 50 page books on demand and that additional time would add about an hour.
I guess the question is whether this is normal and to be expected or not. If it is I'll likely turn everything into raster before going into InDesign. That, however, seems like quite a bit of extra work. Going from AutoCad to Illustrator (to add stroke) then to PhotoShop to change to raster and then into InDesign seems like a pretty convoluted work flow.
View 3 Replies
View Related
May 15, 2013
I installed revit 2014, but the libraries cant load when search in the load family. In what directory was installed that libraries...?
View 1 Replies
View Related
Nov 20, 2013
problem when i open DWF file (exported from Revit 2014) into Autodesk design review 2013 i cannot see the file in
View 4 Replies
View Related
May 31, 2013
There is a Green Bar with 97% with a grey Cancel beside it that does nothing in the left hand corner of the toolbar continually visible when a project is open. When the project is closed this does not completely clear from the toolbar.
What is this? Why is it there? What does it mean? Why is it not 100%?
View 2 Replies
View Related
Apr 28, 2013
How to save a file as a PDF in Revit Architecture 2014? I have tried going to print and then just save as a PDF, but there is not a PDF option.
View 3 Replies
View Related
Jun 21, 2013
I have just loaded Revit 2014, and then loaded a project file created in Revit 2013. When I try to render a view in the cloud I get an error message that says "The file could not be translated.-1" I have tried this with several projects and get the same error for all.
However if i create a new project in 2014 the render works fine, it only seams to be a problem when I upgrade a project from revit 2012 or 2013.
View 1 Replies
View Related
Jul 24, 2013
The program works fine until I try to edit the boundary of the topography. As soon as I click "edit boundary", the screen goes black for about an hour, then comes back with about 25% loaded. This cycle repeats until the loading is complete, so it takes me a few hours just to enter edit mode. The file is only 17, 280 KB, and Ive been running 240,000 KB files without an issue whatsoever.
View 3 Replies
View Related
Aug 12, 2013
We are being pushed from some of our customers to supply BIM files for Revit.I was told by our software supplier that Inventor 2014 could create Revit files, and it looks as though I can via the BIM Tab on the Ribbon. I havent used Revit or created any BIM content before and I was hoping to open another manufactures file (*.RFA) in Inventor to disect the file and how to create our own files. I can only find an import option in the OPEN dialog box for a Revit Project File (*.rvt). Is it possable to open/import a RFA files in Inventor 2014?
View 4 Replies
View Related
Feb 16, 2014
I have a special requirement for a CMU wall, with a 2"x6" stud wall.I am building an exterior wall for a residential home model.
Brick exterior, basically is 3 1/2" width
1/2 mortar joints
I have attached a pic, of what the pattern should look like (created in msWord)1/3 running bond, with 2 sizes of concrete block.I saw somewhere on line, the program for the repeat, but am unable to find again.
View 3 Replies
View Related
May 15, 2013
my laptop has been stolen and I had to buy a new PC...The new one is a windows 8, therfore, I had to install revit 2014....the problem is that I have been working on a graduate class project using revit 2012, and now revit 2014 will not open the files I built on revit 2012...I have only 10 days to rebuild what I have been working on for 3 months!!!...is there any way to open a revit 2012 on 2014 or at least convert it to work on 2014.
View 1 Replies
View Related
Mar 3, 2014
I'm missing some buttons from the panels in Revit LT 2014. I've installed updates 1 and 2.
View 6 Replies
View Related
Sep 5, 2013
I have a drawing model where I cannot create a filled region in one sheet, but on other sheets in the same model I can. the filled region appears but does not mask anything - it is transparent. Transparency is set correctly (to zero) and I have tried bringing it to the front.
Running Revit LT 2014 with latest update.
View 3 Replies
View Related
Dec 16, 2013
in 3D - Section Box all measurement tools are grey indication of no use/doesn't applay/stay away/? Using 3D-SB you can have a glance insidea 3D modell and there be objects that only have a elevaton and no other properties except New Constuction (Specialty Equipment). So confirming space is a pain.
View 6 Replies
View Related
Sep 18, 2013
I have a client that wishes to have the Revit 2014 file reverted back to 2013. I was told that I could send the 2014 file to Autodesk and they would be able to revert it back to 2013. Is this true?
View 2 Replies
View Related
Nov 21, 2013
We are trying to implement Revit server in our organisation. We have installed Revit server on windows 2013 server. We are able to connect to our local server and sync and relinquish the revit model. We had setup another server in our branch office. Now, how to sync the revit model in the local server to the server in branch office. We are able to see both the servers in revit server admin and also copy paste files through browser.
View 2 Replies
View Related
Jun 10, 2013
Whenever I try to print sheets that contain shaded (or better) 3D views, these 3D views do not appear on my prints/Pdf's/DWFx's. I've tried different PDF-drivers and hardcopy printers that are in my office, but they all don't work.
Some things that maybe can narrow the cause down:
- Printing a single 3D view to a DWFx works
- Printing a single 3D view to PDF or hardcopy printer doesn't work
- Printing a Hidden Line view on sheets works on alle printers
- 2013; printing a sheet containing 3D views works. When upgrading the same project to 2014, the same sheet fails.
View 7 Replies
View Related
Aug 22, 2013
- My Revit 2014 is closing after its showing only the interface ( open 3 seconds then closed automatically )
its first time to download .
- and how I know if it haa a conflict with my NAVIDA
View 1 Replies
View Related
Feb 21, 2014
I am looking for a way to boost the performance in Revit 2014 while loading or updating complex family’s. The problem at the moment seems to be that Revit 2014 only uses 1 cpu while loading family’s even if you have a high end multicore workstation at hand. So with hardware there is not much you can do.
A possible solution should be in virtualization, i.e. running Revit 2014 in a virtual machine with a single vCpu assigned on a vmware Esxi or Microsoft Hyper-v multi core host. I have tested this solution but ran into the problem that neither Esxi or Hyper-v distribute the load of the single Vcpu in the virtual machine over de multicore’s of the host. 1 Vcpu uses just one core of the host so no cpu performance advantage at all. The best practice of adding Vcpu’s to the virtual machine just lowers the performance of Revit in this case.
Revit 2014
View 2 Replies
View Related
Nov 6, 2013
When I click on search, my computer opens the notepad application and the error message says "the filename, directory name, or volume lable syntax is incorrect." I cant go to the videos or the wiki directly from revit either. None of the resources on the right side of the screen are accessible. I do have the educator version of the software. I have tried to reinstall from the application, but have not uninstalled and reinstalled completely.
View 2 Replies
View Related
