I receive this error when testing eTransmit for Revit 2013. "etransmit encountered an error while trying to contact the server". Oddly, it is only a problem with on host, and not the other.
View 3 Replies
This morning when I started Revit 2013 and tried to open a file that I was working on last night, I got this error: "encountered an improper argument." The file will not open.
I tried to open a different file, and I get another error saying "An unrecoverable error has occured. The program will now be terminated.... " Revit will close.
I cannot open any files, or get Revit to run. Is my installation corrupt? Do I need to re-install or is it possible to try a repair?
I get the following error when trying to use etransmit on two different projects:"the following files could not be checked for links"..We use Revit Server. We have many projects which etransmit just fine from Revit Server.
I looked this up and the only info I found said that Revit Server is locking a link or links or the main file. I (and our IT dept) checked Revit Server for locking and did not find any issues. I have tried locating the consultant linked files on the Revit Server too.
I get an error when I try to eTransmit from the sheet set manager.An error occurred attempting to create the transmittal. Please make sure the target location is writable and that the target disk has sufficient space.
View 7 Replies View Relatedwhen I was trying to save an image as a PNG, I pressed save then clicked OK on the small PNG Options / Interlace box and then the program completely crashed, encountered an error and needed to close. I tested saving things as PNG and it happened over and over again. It's only happening with PNG, not with any other formats.Can anybody please help? PNG is a format that I need to use and it is becoming very frustrating!I don't know if this help but the Error signature says:AppName: photoshop.exe AppVer: 10.0.0.0 ModName: png.8biModVer: 10.0.0.0 Offset: 00001f44
View 3 Replies View RelatedI bought the VideoStudio x5 yesterday. When i try to open the program, a message appears:
The program has encountered an unspecified error and has stopped functioning. Please contact Corel Technical Support and send the dump file for analysis
C: UsersAndersonAppDataLocalTempvstudio_1.6.0.272_20100308_015620.DMP
I am running:
windows 7 - ultimate 64bits
Video: GeForce GTS250
RAM: 8gb
Directx 11
1. I have updated my Mac Pro to Mavericks; and
2. I have downloaded and applied the patch that was released.
I can open, edit, and export my files just like pre-Mavericks; however, when I go to import them into Premiere via Import, I get an import error:
"The importer encountered a generic error."
Oddly, when I look at the exported files in Finder (which, by the way, do not throw an error during the export process -- I have clean logs), I don't have a preview thumbnail like I did before. Now, it's a placeholder Quicktime logo. Hitting space bar to preview them only offers the information window, which show "Zero KB" as the file size... but in Finder, it clearly shows the correct file size.
Opening the files in Quicktime gives me a "converting" message before opening (these are .MOV files that shouldn't need converting at all), and exporting them from QT won't allow for an Alpha channel, ruining the transparency of the lower third.
I get an "Online Services encountered an error" message when I try to upload a video to Facebook or YouTube. I use Adobe Premiere Elements 10 on a Windows 8 machine
View 1 Replies View RelatedLR locked up and I had to force close. Now everytime I try to open I get and error message 'LR encountered-an error when reading from it's preview cache and needs to quit'
View 1 Replies View RelatedI recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies View RelatedI bought Photoshop CS2 some time ago. I got a new mac (OS X 10.8.2) and when I'm trying to install it I introduce the cd, accept and after it copies the files, appears "The installation failed" The installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
View 4 Replies View RelatedHeres all my system info.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
[code]...
I'm having a hard time creating MP4 HD files. It's always gone well, but recently it seems that I get to around 99% rendering, and then it crashes. I get the message "The program has encountered an unspecified error and has stopped functioning"
I'm running an older dual core intel T2080 CPU with Vista, nothing fancy. It seems to happen with videos that are around an hour and a half. If I keep my videos to around an hour it will complete the rendering process. I am able to see the final 8GB file that was created, but it won't play as the rendering wasn't 100% finished with the longer video. This whole thing happens on different PC's so it's not my program installation.
I receive the following window:"could not import the clipboard because an unexpected end-of-file was encountered".
I delete the message and continue without any problems [that I'm aware of] but the message reoccurs.
While trying to do a full backup to an external hard drive, I am getting a message "error encountered while writing file" after about 75% of the 14,000 photos. I believe I have traced the problem to a missing slide show presentation program that was on an external hard drive (F) I no longer have. The program still works (from the C drive), however if I click on the program thumbnail in the Organize screen (which points to the F drive), and try to delete it, I get a message "An error occurred while reading files or writing files to disc. The disc may be full or there may be a problem with the source media." I believe that is because it is looking for the program on the non-existent F drive. What can I do to enable a backup?
View 4 Replies View RelatedWorking in LR 3.6, Mac OS10.6.8, 8GB RAM, accessing from an external USB 2TB harddrive, and when opening an image I get the error:
"Lightroom encountered an error when reading a catalogue file and needs to quit.
"Lightroom will attempt to diagnose the problem the next time it launches."
I've run "Optimize Catalogue" and that didn't relieve the problem. Also have deleted preference files and still no joy. I also have upgrade to LR4 in hopes that it will fix the problem and it didn't. So I've removed LR4 for the time being until I can figure this out in LR3.
Here is a screen shot:
Lightroom encountered an error when reading from its preview cache and needs to quit. Can't access my library. What can I do?
View 1 Replies View RelatedI keep getting this error message in LR 4: "encountered an error when reading its previous cache and needs to quit". I've restarted my computer a few times, but it keeps coming up. I got online and found some posts that say "go in Library and " or other posts. The problem is my LR screen is grayed out and I can't go into it at all.
View 1 Replies View RelatedI have the 30 day trial version of Lightroom. I was able to use it for one week, but the past 1.5-2 weeks, it has been locked up and giving this error message. How do I resolve the problem? And how do I reset the 30 day free trial? I would like to have time using the product, before deciding on the annual contract.
"LR encountered an error when reading from its preview cache and needs to quit. Lightroom will attempt to fix this problem the next time it launches."
I have PS CS3 on a older laptop. I have been trying to download the disk on a newer laptop. I keep getting Setup has encountered an error and cannot continue. Internal error 2739. how to get the program downloaded?
View 6 Replies View RelatedI am trying to move my catalog from a Windows xp computer to a new Windows 7 computer.In attempting to do so I an trying to make a backup of my catalog.When I attempt to make a full catalog backup I get an error message at the end of the writing of the backup file. The message is: "Error encountered while writing file."
The images are written to the backup file (> 20,000 images) and the Catalog.buc is written as well, but the Backup.tly is missing in the backup folder.I have gone thru my catalog and have found no unconnected files and no file that are in need of repair. Everything seems to be in order with the catalog.
When I back up lightroom I get an error message, Lightroom encountered an error when reading from its preview cache and needs to quit.
it says it will fix the problem on the next log in, but has not. How can i fix this.
Some saved files will not reopen in CoreldrawX5 showing an error message 'Encountered an improper argument' and that is it! Very frustrating as all the work seems to be lost and needs to be redone.
View 4 Replies View RelatedHow can I set bim server between programs Revit, ecotect and Atlantis?
View 3 Replies View RelatedI just installed Photo shop 6 and now when I close out I get a DDE Server Error, how can this be fixed?
View 5 Replies View RelatedI have a small render farm of about 6 computers running Backburner for a Max Design 2013 animation. After working fine last week, one particular computer is not able to run Server, although all the rest of the computers seem to work fine. On Server startup, the error message is:
Error receiving information: An existing connection was forcibly closed by the remote host (0x2746)I'm not finding very specific information regarding the message by searching Google.
we encounter the following error when trying to launch the Revit server web portal,
View 8 Replies View RelatedRevit Architecture installed on a windows PC, use a Mac server for the fileserver. We are unable to save “. Rvt” files to the server.
View 5 Replies View RelatedI recently installed CS4 and when I quit Photoshop CS4 I get a "DDE Server... memory could not be 'read'" error. I've looked all over the forums for solutions to this, tried deleting my preferences file, reinstalling CS4, and fiddling with performance options, but nothing seems to make a change. I never had much trouble with CS2 or CS3.
View 9 Replies View RelatedI have downloaded Illustrator, Photoshop, InDesign from the Creative Cloud. When I try to open the app, I get an error that tells me "Cannot find the server "NDC-DiskStation" (my server name)" I've contacted Adobe about 5 times they keep sending me to Apple, which always sends me back to Adobe. I can open my app when I am connected to my server at my office, but cannot open it when not connected. However, I downloaded the app while not connected to my MacBookPro lap top.
View 1 Replies View RelatedWe are running Revit 2012 Suites on iMac w/Parallels w/Windows XP SP3. Office file server is a Lion Server running 10.7.5. While working in Revit we can; save PDF's to server, export DWG/DXF to server, and for a few moments after opening a file we can save a .rvt file to the server. But after more than ~2min, Revit freezes at any save attempt and we have to force quit through the task manager.
Last few lines of journal entry for event reads as follows.
[ Jrn.Directive "DocSymbol" _
, "[Res.TemplateLionTest.rvt]"
' 0.000008 2:<<<BackupFileManager:reUnlockPreCommit
' 0.003275 3:<<<relinquishAllLocks
' 0.003386 2:<<m_oSaveToTempFile->preCommit
' 2:< Error encountered renaming main file to backup. Error message: Access to P:ProjectsXXXXX ProjectCADRevitRes.TemplateLionTest.rvt was denied. ]
then repeats the '2:< Error... line for a few pages..
this error has persisted throught Revit 2011 and 2012 versions.
