VideoStudio :: Pro X4 Rendering - Process Starts And Just Stop
Jul 4, 2013
I have problem with rendering. I record Videos on my Panasonic SDT750 and they are in AVCHD format. I usually use two options Render video "same as first clip" (whilst all videos are the same) or upload to you tube in 16:9 format. When I start to render, the process starts and just stop sometimes at 2% sometimes at 4% and dosen't show any error message. It worked previously with no problem.
I tried to restart the software, nothing.. I tried to re-install, nothing.. This problem seems to occure after latest update. My desktop spec. should be ok, like I said it worked fine before.
I run Win7 Professional 64bit, processor: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3601 Mhz, 4 Core(s), RAM: 16GB and graphics card: GeForce GTX 570 from NVIDIA.
I didn't make no changes in settings, everything is as it was first time installed.
View 1 Replies
ADVERTISEMENT
Jun 8, 2011
I am trying to complete my first project in X3 with a new computer. I have done many projects on an older computer with VS 10. I X3 stops working during the rendering process everytime I try to make a video file. I'm making a 4:3 mpeg 2 file (DVD). I have tried several different ways and the most I can get done is 24%. i have tried to cut out a clip..I get a dump file each time that it tells me to send to Corel.
View 5 Replies
View Related
Oct 25, 2013
I have a couple users that when a command is picked from the ribbon Revit starts to run a configuration process. A window opens like it is installing Revit again. They can select cancel or OK and the command will continue to allow them to work but it is very time consuming waiting for it to stop or cancel the process.
This started to happen once update 1 was installed for Revit 2014. I have tired repair/reinstall and uninstall Revit to stop it but it still continues even if Update 1 isn't installed.
Windows 7 64bit with all the latest patches. Revit 2014.
what I can try next. I have 70 users and this is only happening on 3 of them.
View 1 Replies
View Related
Nov 3, 2013
Got a new Windows 8.1 PC. Successfully transferred all photos (about 12000) to the new hard drive. When I open Photoshop and use "get photos from files and folders", I can locate the pix but when I try to import them, the process starts then stops without bringing any to the organizer.
View 2 Replies
View Related
Oct 25, 2011
All the footage is available, but backburner starts rendering and the stops just before 100%. So I have a bunch of clips on idle, and there are most of the time only 2 frames missing.... why is that? Can I consider the job done and delete it out of the backburner?
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
View 9 Replies
View Related
Nov 11, 2013
When rendering a Video, first AE is ultra-slow, then the Screen starts to flicker, then several AE Icons appear in the Taskbar and than it freezes...
System: Windows 8 on Intel i7 3930 with 32GB Ram, 2TB SSD and AMD Radeon HD 7970m... latest drivers installed...
View 4 Replies
View Related
Feb 24, 2014
In elements 9, how do i stop an "edit in process" when there is actually no edit in process?
View 2 Replies
View Related
Oct 21, 2013
I am using ilogic to modify the boxes:
I have a one rectangular box in that box again small rectangular boxes in this my problem is when iam giving value for smaller boxes(all boxes height) more than outer box how it will show the message box and how to stop the code.
d1=big box height
d2,d3,d4---small boxes height
I am writing code like this:
IF((d2+d3+d4)=<d1) then
Msg.box(give correct value)
end if
here it's showing the message and it,s not stoping the program.
View 2 Replies
View Related
Jun 28, 2012
Can't find a way to stop 3D rendering in Photoshop CS6!
Only with force quit...
View 8 Replies
View Related
Nov 10, 2011
I have a 580GTX and I think that's a pretty powerful card. With Quadcore 3.6ghz... And iray will never ever stop rendering when set to unlimited? I thought that eventually, somehow it should stop when it calculates everything possible? But there is no progress bar. Despite leaving even a simple scene running for hours upon hours it still has some fuzzy grainy specs in certain parts of image though.
View 1 Replies
View Related
Feb 11, 2013
I applied the Extrude / Revolve to text and once it rendered the text Illustrator keeps rendering it, that is, it won't stop.
There are two objects, one with a single word and the second object has 4 lines of one word on each line (peoples first/last names) If I click Stop numerous times I can "catch" the function and get it to stop but if I change anything it starts the function all over. CS4 did not do this.
Restarting application has no effect.
I running Mountain Lion on a Mac Pro 2012 vintage, 16Gb Ram.
View 1 Replies
View Related
Oct 29, 2012
Is it possible to batch process .jpegs one stop lighter in Photoshop 10? My picture are of football, but all seem a 1/2 to 1 stop darker than I wanted.
View 2 Replies
View Related
Jun 27, 2012
how I can stop rendering an animation and still retain what has already been rendered?
View 9 Replies
View Related
May 31, 2012
After creating a reflection of a text extrusion in CS6 Extended, when I select 3D>Render the rendering process erases the reflection. The opacity is up and the selected colors are quite visible. This does not happen all the time, just most of the time. Is there something that I'm doing wrong or is this a bug?
View 2 Replies
View Related
Feb 13, 2013
I'm getting this error message when trying to render a simple cfx with a simple action node inside it. The action node only contains a photoshop file with one layer and the default camera moving towards the layer.
My media cache is set to Pro Res 422.
View 9 Replies
View Related
May 14, 2013
i have a rendering problem... rendering a cfx on the timeline keeps interrupting ... I get an error message "rendering interrupted. cannot process connectfx "
I tried to disconnect all footage which lead into action and rendered them one by one to find out which footage is the problem... the 5K red footage makes the problem.what I need to do is to auto stabilize the 5k clip (which was due to a bug(?) not possible inside cfx, so I did it with the desktop tools) than brought the clip inside cfx, added a modular keyer node, than a timewarp node than went inside action... than back to the 1920x1080 timeline
the problem started suddendy. rendering worked fine (keying the 5k footage, timewarping.. axis... ) ... than I added another media into action, did some axis animations and the problem started (but if I disconnect the media I added, same rendering error..)
View 2 Replies
View Related
Oct 19, 2010
Is there no simple way to select a start and end time for the video timeline?
I have the text the way I want it, but it's OVER the video. I want the text to come up first then the video. The only way I was able to accomplish this is by drag and dropping the video into overlay track timeline. That won't work b/c I have to overlay the track yet. I know I can overlay then save then reimport. but something as basic as delaying when the video portion starts by 8 seconds should be simple. If I want an 8 second delay before my video starts how do I "insert" that delay before the video note: I want a HARD delay not fade in fade out.
View 4 Replies
View Related
Jul 28, 2013
Importing ceases during the rendering preview process at image 2 of set. Same if using SD or Flash Cards, small or large import. No problems using Bridge so reader is operational.
View 4 Replies
View Related
Feb 9, 2013
I have a question concerning Adobe Dynamic Links.
This is my problem : I work on After Effects. I have a composition that is rendered quite fast. (almost in real time...)
But when I open the linked comp in Premiere Pro, it lags as hell. Maybe 2x, 3x slower.
So I'd like to know why Adobe Premiere Pro is slow, while After Effects is fast ?
View 5 Replies
View Related
Mar 1, 2012
Along with giving me a failure after closing telling me to send my dmp file to Corel, but Corel not showing me anyway to do this, my newest error is the best one yet. The program opens with a little window saying "Load from Stream Error" and an OK button. The OK button does nothing. Nothing else can be used. The computer is totally locked up with this wonderful piece of unfinished program in place. My only recourse is to power the computer off manually to restart it. starting VS"pro"4U just locks it down again. Is there a way to clear this without following Corels instructions for every problem. That being to remove and reload the program. The next time I remove it will be to throw it and it's boxed installation disk in the trash can, then go out and buy something a bit more reliable. Like Adobe's little girl Premier, or Sony's video editing program.
This looks so nice, if it just worked. I have quite a few hours into a video and just wanted to add a new title when this started.
View 3 Replies
View Related
Aug 19, 2012
I've owned X4 Pro for about a year and just now purchased X5 Pro/Ultimate. We use it for our voice over business, which on occasion needs to edit videos for very simple projects. VS seemed to fit the bill at its price point, but now I'm second guessing my decision.
The issue is the time it takes from hitting the "Play" button to the time it actually begins. I would have thought it to begin instantly. But instead it takes 2 ~ 3 seconds to start. It has been this way with both X4 and X5. Before you ask, it has been this way using the following setups:
Windows XP with both stock motherboard video and with Asus Geforce 210 (VS X4)
Windows 7 with both stock motherboard video and with newly bought MSI R6850 Cyclone 1GD5 Power Edition (both VS X4 & X5)
Types of videos used: every type of file extension I could get my hands on and every type of length (full length movies to a few second snippets).
View 4 Replies
View Related
Jan 16, 2013
I have 3.91 GB of clips in a project file that I am ready to burn to a 4.7 GB DVD... unfortunately I am stuck in the 'Add Media' step 1 of 3, the 'Next' button is grayed out so I cannot proceed to the next 'Menu & Preview' step.
View 5 Replies
View Related
Jan 30, 2011
We forgot to stop capturing video using VS Pro X2. There is now a file size that is a bit over 337gb. When trying to open that file for editing, an error message pops up [There is no common media type between these pins] (17101:70:2)
I am assuming that this file cannot be opened to remove about 330gb of unwanted data.
View 5 Replies
View Related
Aug 15, 2013
I have a Canon SX50 HS digital camera that's (in my opinion) a great camera. I don't know if it's a DSLR or not but if it's supported or not to make stop motion videos? Also, why not??? Really??? My webcam works with stop motion but my Canon camera can't? I paid 500.00 for a camera that I can't use with VS Ultimate X6? If not, whats so Ultimate about it?
View 2 Replies
View Related
Dec 31, 2012
Creating DVD from project file.
I'm using Windows 8 and VSX5.
Video clips are all MTS file(AVCHD)
Total size DVD is about 7.xxgb.
Project is 16:9 and Dolby 2ch.
First time, Burning process looks OK but it has an error message when it was 6% progress convert. Attachments are error message and dump file.
View 2 Replies
View Related
Aug 22, 2013
As I did all my recording, I noticed a distracting element in the bottom right corner of the image and I would like to crop it out. I calculated that I could use the crop filter at 90% and it gets rid of that annoyance. However, this leaves some black space around, which I don't need. Maybe I need something more like a zoom-in so I can only see 90% of the original image, but taking up the whole space available (without that frame around). I would assume that exists but I cannot find it, or if there is a different process, I have not figured it out.
View 9 Replies
View Related
Oct 20, 2011
In making movies I sometimes need to pause the DVD authoring process (Share, create DVD, with various clips in the timeline), and be able to pickup the procedure from the point of pause later. Not infrequently, after I've shut down the computer and restarted after a day or more. If I close the process, there's a message box displayed that says "saving project" but it doesn't say where nor give the opportunity for specifying a file name.
If the authoring process is re-started without computer or program shutdown and no intervening different work, the authoring process re-starts where it left off. But if there's a shutdown or diversion to other work, getting back the paused activity seems to be a lost cause: in the opening authoring panel there doesn't seem to be a 'get saved project' option available despite the various add video files/project files/other media buttons'
So, I set up a special test file with a unique name, made sure all the preference boxes pointed to the same working file space and did a sample run, closing the author process before getting to the burn stage. The save project file box appeared briefly. But . . . one cannot find the saved file in the locations specified by the preference boxes either in the main menu or the author panel preferences icon. And even if it was found, re-loading it seems to be a problem (see remark above)
This situation exists in VS11+ and also in VS14, so it seems to have existed for some time.
So, the questions:
1. under what name does the author panel save a partially completed work?
2. where does it save it?
3. how does one re-load a saved, partially authored work?
View 7 Replies
View Related
Oct 18, 2013
Using Video Studio Pro X5, I edited a home video and saved my project into vsp file. When I previewed the video, it looked fine. I clicked Share, Create Disc, chose DVD, click Next, Next, Output, chose Create to Disc, and clicked Burn icon at the bottom right. It rendered for a while and completed.
When I played the DVD, the movie loops (meaning it played to the end of 15-minute video clip and did not stop, it went back to the beginning and played again and again)
View 1 Replies
View Related
Jan 31, 2012
I've recently changed from PC to Laptop and reinstalled Videostudio x4.
On my last PC (which was considerably older and less capable) while using the stop-motion editor, I could capture in upto 1280 x 720 resolution using my Microsoft Lifecam 5000 HD - however now with the same camera after the reinstall the highest resolution on the drop-down menu is 640 x 480 which obviously isnt widescreen or anywhere near in terms of resolution.
One thing which could be related is that on this laptop I have two lots of "program files" - "Progam Files" and "Program Files (x86)". The program itself is installed on the x86 section but when VS is searching for sample videos or overlays etc they've all needed relinking as its attempting to find them in the normal "Program Files" folder - could the resolution problem be a similar relinking issue?
View 1 Replies
View Related
Nov 1, 2011
I have a Nikon D3100 camera and I am trying to use it to make stop animation movies. When I plug it in via USB I can import videos/photos to my computer, etc...so it is recognized. However, when I try to use it in VideoStudio X4 the only option I get is a webcam. Are there any special drivers I need to make this work? I have searched google a bit, but maybe I am missing something. I am using the trial version of the program to try and get things worked out before I actually purchase it. The software looks wonderful for stop animation so I really want to make this work.
View 2 Replies
View Related
Mar 28, 2012
My son has taken an interest in creating stop-motion animation with his Lego building sets using Corel Video Studio 4. I have experimented with using our video camera (JVC Everio) as well as several of our digital cameras (Nikon "Coolpix", a semi-generic Canon, etc.) to capture the images "live" and then import them using the stop-motion creator in the CVS4 program with no luck. The best I can do is use a webcam. The problem is that the lens aperture and resolution on the webcam is so small that it creates a sub-optimal image.
I am thinking I will need to invest in a DSLR (which I have been thinking about getting anyway) in order to effectively use this feature. suggest a DSLR that will merge with CVS4 and allow me to capture the image live from the camera and produce better animations? I have looked at a Nikon d3100 and the Canon EOS Rebel - leaning toward the Nikon (for no particular reason) but want to make absolutely sure it will interface with CVS4 like this.
View 5 Replies
View Related
