I know it works in CS6, still have that installed. I don't get it, it's listed as a supported card in the CC spec. I have the lastest CUDA/Driver installed.
View 8 RepliesI have tracked this problem with different versions of everything but can't seem to zero in on a cause. This problem seems to randomly occur when I start up After Effects with other apps already running. I haven't isolated every scenario because sometimes it works, other times it doesn't, and still other times I don't need ray-tracing anyway.
If I then go about clicking things off and re booting, etc, it will eventually work. This past time I started AE after I already had Photoshop and Premiere Pro running. Safari, Outlook, Power Point, a couple of Finder windows and VLC player were also running. After I closed everything and then started AE first, it recognized my CUDA drivers and card.
Then I re opened everything I had open before ... loaded them full of content, went about the business of editing, ray-tracing, rendering, etc. with no issues.
I guess I should be happy with a solution that depends on the order in which I open applications and I am certainly glad there seems to be a work around (albeit a workflow stopper). Are there settings in my other apps that are blocking AE's ability to recognize CUDA? A conflict with VLC player?
With a relatively new iMac, gobs of RAM (some say is way more than needed), a fancy subscription to Adobe Creative Cloud with timely updates, I'd like to get into that comfort zone where everything just works.
on my system Premiere Pro CC is only using GPU rendering with AVI output formats.
All other formats like MPEG2, Quicktime, H.264 are unfortunatly fully CPU rendered (=slow).
I just upgraded from trial to payed mode and when Premiere started the CUDA was already enabled (might have activated it during trial already).
But anyway I checked if my card was in the support txt file and also used the cuda.zip auto tool to make sure I had no typo.I did this for Premiere Pro CC and also copied the list into the Adobe Media Encoder directory.
So I started playing with input and output formats. It turned out that CUDA is currently only working with AVI output. I installed GPU-Z to check my GPU usage vs CPU usage in the task manager.
As soon as I pick any other output format than AVI - CPU usage during rendering is up to 80-90 and GPU at 0%.
With AVI output GPU ist around 30 and CPU in the 40ties or less as it should be.One of my old applications Cyberlink Power Produces 11 is doing the h264 rendering in half the time.
My System is running on:
Asus P8Z77-V Deluxe with 16GB Ram
Nvidia GeForce GTX 660 Ti (with current Driver - 332.21 )
Windows 8.1 Pro 64-Bit (with Media Center) and latest updates
Current entry in CUDA*.txt file (as printed by Adobe GPUSniffer):
GeForce GTX 660 Ti
And already tried:
GeForce GTX 660Ti
GeForce GTX 660
I am working with MTS files (AVCHD, 1920x1080, interlaced, 25 fps) in Premiere CS 6, Windows, and want to render my project with the same properties as h.264.
[URL]
A common misconception is that CUDA/OpenCL processing is only used for rendering for previews. That is not true. CUDA/OpenCL processing can be used for rendering for final output, too.
But where/what are the options/settings to use CUDA not only for preview purposes, but for accelerating the rendering of the final output, too?
I've been using AE CS6 on Mac OS 10.7.4 upon release and updated to 11.0.1 when it was released as well, so for a while, but just today I started to get this warning-
"Ray-tracing on the GPU requires CUDA version 4.0 or later. Ray-tracing will use the CPU until you install the latest supported CUDA driver."
I am running a supported Quadro 4000 with the latest CUDA driver, 4.2.7, and about the only thing I know of that I have installed recently was the update for SpeedGrade today. Why I'm now getting the warning?
I have the possibility to use AE CS6 and a computer with either a graphic card Nvidia GTX 660 or GTX 770.
Are they supported by Windows 8.1 and After Effects CS6 ?
On my XPS 400 system I have a Geforce 7900GS 256MB card installed and on the other system, an XPS 730 H2C, I have dual GTX 280s.
Quadro cards designed for PS CS4 were simply way outside what I could afford. Just like I could not afford faster (above 7200 RPM) harddrives.
I figure, that is the experence of most PS license holders who visit and post in these forums.
My lay research tells me that "possibly" the biggest difference between, say my Geforce latest and greatest, and your Cadilac Quadro is in what the respective drivers are programmed to do.
Is there a reason that After Effects keeps crashing and only getting to a certain render point when pressing "0"? If I split projects into different compositions I don't tend to get the same issues, but it's more pain than it's worth spiting one video into 4 parts.
View 5 Replies View RelatedI am trying to make about a 7 second clip of some photography (converted into that cool 3D paralax effect) with a lens flare and a CC light rays effect. The damn thing took two hours and was less than halfway done, which seemed extremely long to me. Here is my setup:
i7 4770 (2 processes for system, and 6 for AE, with 2 gigs per process)
Nvidia 760 4bg
32 gigs ram (4 set aside for system and the rest for Creative Cloud stuff)
SSD: system, media cache
HDD: projects, files
Everything else I've tried to render has been reasonable times. For instance 5 minute clips usually take about 15 minutes. I've tried variations of the multiprocessing tab to no avail, and changing the media cache to HDD which didn't work also. Just seems like something is going terrible wrong.
So I guess my question is twofold.
1) How important would it be to get another drive? (I'm between adding one SSD or getting 2 HDD's per my budget, which presents another question of would a 2 SSD, 1 HDD setup be better than a 1 SSD, 3 HDD setup)
2) Do I possibly have something configured wrong?
So today I was editing and I finished, so I tried to render it so I can have in a .avi. But once I rendered it I got no errors or nothing. So I went to the desktop were it should have been placed, I loaded it and it didn't render properly after a couple of secs the music stops playing and I didn't get the glow effects or the full edit. How do I fix this tell me if you need sertain information.
View 6 Replies View RelatedAny way of creating a glowing object without using the rendering effects.I am trying to create an Acrobat 3D file using Tetra 4D which does not support 3DS Max rendering effects.
View 1 Replies View RelatedI was wondering if there was a way for me to render a full composition in Aftereffects as a Photoshop file (1 document) that contains all the layers?
View 12 Replies View Relatedwhy my After Effect render so lousy???When i finish my rendering,the video play very slow and keep stopping....I've tried for many times,but it's still the same result..
View 2 Replies View RelatedI am currently working on After Effects CS6 and I'm wondering why it takes a long time for me to render a composition. I am not sure if the problem is with the mac that i am using or with the settings i have on AE. When I render the composition of 21 seconds video with 1080p 29.97fps it takes 5 hours and eralier i triend rendering again and it takes 7 hours. is this normal?
I am using Mac with this spe
Processor 2 x 2.4 GHz 6-Core Intel Xeon
Memory 12 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5770 1024 MB
I downloaded a composition from Videoblocks.com and hit RAM preview to let it play smooth. Then whetever I move the CTI after that, it de-renders.This has never happend in other compositions I've worked in.
View 3 Replies View Relatedjust switched from a macPro to a Windows Workstation specs are:
Windows7 with ServicePack1
intel Corei7 3970X
64GB RAM
Nividia GeForce GTX680
Using Quicktime Version 7.7.4
so everything runs smoothly till i try Rendering my comp in a .mov-Container Codec doesn't matter which one i take. Tried everything from Fotojpeg to DNXHD to png. Nothing Changes. As soon as i swiitch to avi rendering it's really fast. (Project rendered in 5mins whereas i cancelled the rendering after 15mins when trying to render to QT-Fotojpeg)
is there a way to define a sequence of images to be rendered into a movie from the command line, without first creating any composition ? Basically loading media and creating composition by command line or by script ?
View 4 Replies View RelatedI have a .wav file in my composition that I see the waveform going across the entire composition. If I grab the first 10 seconds of my composition and hit 0 on the number pad, it correctly plays the audio the entire time. When I render that composition, making sure audio is enabled, it doesn't work. The resulting .mov file plays the audio for the first 5 seconds and then just abruptly stops.
I'm using the Creative Cloud version.
I have a fairly basic comp consisting of 3 or 4 3d layers spaced out along the Z axis, two precomps containing some edge lighting effects, a camera, a light, and the troublesome adjustment layer. The adjustment layer only contains some color correction and a flare. I thought perhaps a certain effect may be causing the layer not to render, but i eliminated that possibility by removing the effects i had and trying several other, the layer was still not rendering. I think I have exhausted all of the really simple solutions, nothing is solo'd, all the layers are visible in the preview, the layers are all in the correct order etc.. I can't SS the project right now as I am not at home, but i can tell you that I am working with CS5.5, on windows 8.1, i5 cpu, 8 gigs of ram. The really frustrating part is that a slightly earlier version of the project successfully rendered the adjustment layer and I don't remember changing anything major. Shots in the dark?
View 3 Replies View Relatedi have the imac 27 680mx 32gb ram,when i render on cs6 takes very long time, the first one takes 8-10mins,when i do the second time its very fast 30seconds
View 7 Replies View RelatedIt seams that when editing in After Effects (CS6) despite doing everything i've been told to do i get no audio when editing video clips imported from my digital camcorder. The only audio it seams i can hear in it is an actual song or audio file (MP3) and the worst part is when i render out the video after adding my effect even when i check the audio output box in the Output Module, i keep most render settings the way they are? but i have tried everything that i have seen suggested but nothing seams to work and no matter what i do i cannon manage to get any audio from my finished products unless there is an actual song in it.I must also add that in the Output Module i have tried many formats such as MPEG4, H.26, AVI, WAV, Windows Media and many others, none of them make a difference to the audio, only the quality of the video.
View 4 Replies View Related However my machine is not using all cores and is rendering very slowly.I have a mac pro running os 10.9, 2 x 2.4 GHz 6-Core, 64GB RAM, and my graphics card is an NVidia Quadro 4000 with Cuda version 5.5.28. I've looked for updates, but everything seems to be current. Not sure what I should do?
Fast Draft:Available Texture Memory:1515.00 MBRay-tracing:GPU
OpenGL
Vendor:NVIDIA CorporationDevice:NVIDIA Quadro 4000 OpenGL EngineVersion:2.1 NVIDIA-8.18.22 310.40.05f01Total Memory:2.00 GBShader Model:-CUDA
Driver Version:5.5Devices:1 (Quadro 4000)Current Usable Memory:691.00 MB (at application launch)Maximum Usable Memory:2.00 GB
sometimes rendering the RAM-Preview takes some time. while waiting I would like at least to read some articles on the internet. But as soon as I click into an other windows, AE stops rendering.
is there a special setting / workaround to avoid this (user-unfriendly behavior) ?
Today I was just about finished editing a video on CS6.What happens is that while RAM previewing at some point during the loading of the preview it will stop loading, It will then proceed to play the ram preview on loop and when I press a button to stop it a small box pops up in the centre of my screen and the ram preview bar to show what has loaded (the one which shows green for parts that are loaded and blue for cached) turns black and sometimes other parts of after effects turn black. This has happened before and I fixed it by uninstalling and reinstalling After Effects about 6 times. I would do that this time though I would like to know the cause of it and any possible fixes as it is quite irritating. Another thing that may be happening is the RAM usage is slowly filling as I render. This has happened before on my laptop and I did not manage to fix it though it was not related to the first issue that time. The last time when it happened on my laptop the RAM usage eventually filled up to 100% and it would no longer render. I am not sure if it is happening this time as it is still currently rendering though I will update the thread if it does. Finally my render is going very slowly, I am not sure if this issue is realted to any of the above or if it is just the effects I am using though. My memory and multiprocessing settings are using 6 cores of 7 with 2 GB of ram allocated to each with multiprocessing on. My ram allocated for other programs is 6GB. To fix these Issues so far I have tried clearing the cache, purging the memory and image cache, restarting my computer and reinstalling after effects.
View 1 Replies View RelatedI have a problem with After Effects CS 5 on Windows 7 64 bit.When I try to render out quicktime formats in After Effects I get an error message:
After Effects error: Rendering error while writing to file "E:/ . Unable to open file. (-1610153459)
Rendering to other drives, like C: or D: works fine but as soon as I try to render to the E partiton.I get this error.... It must have something to do with permissions on that partition.I don't want to reinstall windows.
I was editing a video an while playing with the scale I went to RAM preview and it wouldn't work so I closed it down and reopened it as this problem has happened a few times and this has been the fix. I then went to RAM preview from the beggining and my computer crashed, no bluescreen the monitors just went blank and the BIOS popped up. I then reopened my project and RAM previewed from the beggining and it didn't start it just said requesting frame 2 of ... I then played with a few of the prefrences eg. clearing the cache and purging memory and It still didn't work. I then disabled multiprocessing and RAM previewing worked again though I would like multiprocessing to work as It is alot faster. I then tried restarting my computer and reinstalling AE but still no luck.Also rendering does not work either with multiprocessing enabled.
Specs: i7 4770k @ 4.4Ghz
G.skill Ripjawz Z 32GB @ 2133Mhz
GTX 780
Samsung 840 pro SSD
Seagate Barracuda 2TB HD
When I start rendering a composition, I usually just go to a spare monitor to browse the web and do additional work. However whenever I click onto my new monitor, AE stops rendering and gives me the 'finished sound'. Why doesn't it complete rendering? I have to leave my computer alone and keep a window selected in AE for it to complete.
View 1 Replies View Relatedi did an animated vector graphics - i prepared all vectors iamges in illustrator and animated them in after effects afterwards. i am now about to export and i wonder what are the best settings. for video i normally use quick time with animation codec and it seems just fine to me. but i am not sure if it is ok for the cartoon. what codec to use for storing and publishing on the internet (youtube, vimeo)? what about swf? I red it is used to deliver animated vector graphics (such as cartoons) over the Internet
View 2 Replies View RelatedFor a project, I've imported a jpeg file that I made on Photoshop. The colors look perfectly fine on the RAM previews and stuff but after I render it, just that specific jpg image comes washed out. It should be dark grey / almost black but after rendering into .mov that image becomes medium grey. It's noticeably more washed out and lighter. All the other colors in that image are also noticeably lighter as well.
I have set my working space to my monitors color profile and I have proofed the colors after saving on Photoshop.
cs6 lighting effects crashes when rendering nikon d600 nef files on windows vista
View 2 Replies View RelatedI am self-taught in AE and must have missed something basic here.
I am simply trying to set which image (frame) will appear as the icon for a renedered comp. I understand how to set the poster frame for a comp, and I get the desired result in the project window when the comp is selected. I "set poster time" while the timeline window is selected as well, but when my comp is renedered the icon is always the frame at 10 seconds on the timeline.