When I connect with Autocad Map to WMS server (Geoserver) and try to choose Server CS, Autocad crashes. This didn't happen until 2012, and in 2011 work just fine.
View 1 Replies
I'm using LR 2.6 on a Mac running 10.7.4 (Lion).
The program keeps crashing/closing ( not freezing in screen) when I try to change the destination folder when importing.
i've not encountered tis problem before. It's just appeared since my upgrade to Lion.
It occurs regardless of the camera being used (or import from external HD). If I import to the currently selected folder everything works fine. And all editing functionality seems normal when working with images currenly in my LR library.
The crash occurs when selecting the destination folder and hitting "choose". That is to say it's before hitting the final "import button", and is definitely triggered by choosing the alternate folder.
I am copying chunks of code from the My First Plugin tutorial and am using the code that opens Inventor to start the form. I have both Inventor 2012 and 2013 installed on my system. I have gone in to the properties and changed the .dll reference file to read out of the bin/PublicAssemblies folder in 2013, however, when I run my Windows Form, it will open Inventor 2012 instead.
View 2 Replies View RelatedI have code that works just fine in AutoCad 2010 (just plain ol' AutoCad), but will not run completely in AutoCad Mechanical 2012. The code will draw lines, arcs, circle, plines, etc. as well as insert blocks. The command to insert the block has the entire block path so I don't have to rely on setting that up for everyone.
In AutoCad Mechanical only the blocks show up. No lines, arcs or anything else is drawn. I do not use a command method (like in LiSP) to create those objects, I create them through the block table and block table records.
What do I have to do to get my code to run in AutoCad Mechanical 2012?
The following code crashes with an exception at the point where I try to rename the extrusion feature:
CComPtr<ExtrudeDefinition> pExtrudeDef;
hRes = pListOfExtrusions->CreateExtrudeDefinition(pProfile,kCutOperation,&pExtrudeDef); pExtrudeDef->SetDistanceExtent(_variant_t(kHeight),kSymmetricExtentDirection);
[Code] ......
Is it possible to rename an extrusion feature. If so what is the method to do it?
Using Inventor 2012 and using ilogic rule or VB codes to auto Save Copy AS DWG?
My old code error out when debugging. The exact error is on this code line:
DWGAddIn.SaveCopyAs(oDocument, oContext, oOptions, oDataMedium)
Autodesk has agreed that this code does not work on Inventor 2012 and that the development is working on it. This code is part of the Snippets built in Inventor iLogic Rule Browser.
How to change the color of layer that will be used within a drawing files for special purposes.
Ideally the code will make the color Red, but change to Black prior to printing.
The "logic" behind the code currently is to differentiate a layer called "Burn" to a highly visible color for the purpose of review by others then, prior to printing, change the color to Black. The firm I'm currently working for uses gray-scale B sided printers only. The firm currently uses Blue for dimension and extension lines so to produce drawings that portray both type of objects "lightly".
Max 2013 crashes when I select some code and drag it up to the toolbar. I thought that automatically wrapped the code in a macroscript, saved it to the user's homedrive, and made a button for it. In 2013 it just seems to crash the entire program before I even let go of the mouse button!
Copy this text into the script editor then select and drag it up to the toolbar.messageBox "Hello"
I have a brand new HP Probook 4530s with the correct requirements to run LT 2012 as well as a certified and tested graphics card and latest drivers, but as soon as I try using offset or trim functions while drawing, my screen goes blank for about 4 seconds and an error message below tells me my Display Driver has stopped working and has recovered.
No matter the screen resolution settings, it still does the same, also the laptop is still cool, so can't be a heat issue.
My work helpdesk has recently installed AutoCad 2012 and my co worker and I noticed that at the start up its loads very slowly and often when we double click on a DWG to open (without Autocad being already open) it crashes.
View 2 Replies View RelatedAutoCAD C3D 2012 has been crashing nonstop over the past 3 days on me whenever I try to "Create a Feature Line from Object". I know that it is a localized problem as a co-worker has been in the same drawing and done grading work without any problems. The error has occurred in multiple drawings.
Product Version: F.107.0.0. AutoCAD Civil 3D 2012 SP1
why our copies of AutoCAD MEP 2012 seem to hang when loading the default dwt files? On the splash screen it details all the files being loaded and when it gets to the dwt file it just hangs at 0%. In the windows task manager, acad.exe stops using memory (around 90megs) and the cpu stops too. It's get's really frustrating, especially as it only seems to affect our new Dell Optiplex's and a couple of our old Dell Precisions. Some of them work first time every time, no probs. All PC's are Windows 7 Pro 64bit and running the latest service packs for AutoCAD.
View 2 Replies View RelatedWe are running Autocad 2012 on Windows 7 and printing to an HP5200 via server mapping in three different labs.
Had a similar problem before and changed the printer drivers from Universal back to PCL5. Since Christmas however this problem seems to have come back. We haven't changed anything. Wondering if maybe there were patches or something that affected this?? When we preview or send a print job Autocad just greys out and crashes. I do know that if we configure the computer to print via TCPIP it also works fine but this is not ideal with the number of computers and students we have.
Another thing we seemed to have noticed is that we don't have this problem with all printers but more oddly we noticed that when we change the default template some templates work and some don't.
By default we are set up to use the acadiso template as we are using the metric system - we can't get anything to plot using this. If we start with the standard acad template we do not have this problem. We have tried plotting a simple circle or a more complex drawing with the same result. The sample files plot fine but I'm guessing they were likely not done in metric...
I frequently have AutoCAD LT crash on me when I close a file. It seems to happen most after I have plotted the drawing.
View 9 Replies View RelatedEvery time we have the file dialog boxes open and try renaming or any other explore action beyond changing folder location and hitting the save button AutoCAD LT will hang and crash. We have tried starting the file operation and then just canceling and it does the same exact thing. What happens most of the time is the user will be working on a file and need to save it. They click save as and will go into the folder and right click and rename an existing file to a backup name and then hit save. It proceeds to crash instantly and the document doesn't get saved. It doesn't seem to matter the name of the file or folders or if it is a rename or delete operation. It seems to be related to bring up the explorer options within AutoCad honestly. All of our computers do the same thing.
View 9 Replies View RelatedI created and replaced a dwt in 2013. tried opening it in 2012 and it crashes with a "fatal error: unhandled access violation writing 0xec307ff8 exception at ec307ff8h". I restored to whole folder with our dwts to before I created them. and still crashes with 2012. they open fine in 2013.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
Inserting an image (sid, tiff, geotiff, etc) using the image insert command in Map 2012, Or Raster2012 causes program to crash. Have reported to Autodeak, no response....
View 1 Replies View RelatedI am running Civil 3D 2012 and my Hydraflow crashes everytime I run an analysis. I am using a known Q and have input pipe inverts/slopes and pipe sizes. Everytime I try running an analysis I get the following message: Line 1, 2, 3 has no flow. Check pipe size(s) and slope(s). Then the program closes up.
View 1 Replies View RelatedWe are running Autocad LT 2012 on the newest fastest souped-up Lenovo Thinkpad W520 available, with Windows 7. If I accidentally direct Autocad to print to a device that is not currently on-line it goes into "not responding" cycle and crashes.
View 1 Replies View RelatedWhen I start Reference Manager, the program window opens but at the same moment a message window opens saying 'AutoCAD component has stopped working Windows is checking for a solution to the problem...'. A solution is not found, so I can only select 'Close program', and the program closes. I have run Reference Manager successfully a few weeks ago, and after that I haven't installed or removed Autodesk programs. I have Windows 7 64-bit, AutoCAD Mechanical 2012 SP2 and Factory Design Suite Ultimate 2013. I cannot use Reference Manager 2013 (which works) because it saves the files in 2013 format.
In Windows Control Panel / Troubleshooting I found a file with the following text:
Description
Faulting Application Path: C:Program FilesAutodeskAutoCAD Mechanical 2012AdRefMan.exe
Problem signature
Problem Event Name: APPCRASH
Application Name: AdRefMan.exe
Application Version: 18.2.51.0
Application Timestamp: 4d4b63d1
Fault Module Name: AdRefMan.exe
Fault Module Version: 18.2.51.0
Fault Module Timestamp: 4d4b63d1
Exception c0000005
Exception Offset: 000000000003dc71
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1035
Additional Information 1: 9416
Additional Information 2: 9416e8b8865dfbe86f7b5b96c4331260
Additional Information 3: c86b
Additional Information 4: c86b8562f11a561a601a7649b1d675a3
We have used Inventor 2010 with PSP 2011.
- Recently we have upgrade to Inventor 2012.
- Installed pspro_cad_fp_10.0.39.3 update for PSP Server and for PSP Clients.
And now, some drawings we can not open in Inventor 2012. Inventor crashes!
But some drawings we are lucky to be able to open and work with.
Drawings have the same template.
If the drawing is locked (read only) then inventor 2012 can open it without a crash.
If I drag&drop drawing out from PSP onto my Desktop, Inventor 2012 can open drawing without problems.
So we are not able to work with some drawings in Inventor 2012 and PSP 2011.
As the first and quick (and 100%) solution - rollback to Inventor 2010 can cost us about 5 man-days of work. (Because we have done some work in Inventor 2012 allready and will not be able to work with this in Inventor 2010)
Having trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely.
Also, from time to time we get the crash when editing MText.
Before upgrading to 2012 from 2010 (against our will), our publishing tool worked seamlessly with our XEROX 6604. Now, strangely only one user out of seven has the ability to publish a set of drawings without crashing AutoCAD. We are happy that it works on his machine, but it seems very odd that the rest of us are affected when our PCs are the same spec and setup.
All of the proper drivers and firmware are up to date.
I work with a national company that creates criteria drawings for new projects. They recently changed to the 2012 version but they save it down to 2007. There has not been an issue with opening files with my 2009 version until recently. All of the computers in our office are unable to open these new files, although they claim nothing has changed. My CAD will pop up a fatal error and shut down whenever I attempt to open the new files. I downloaded the 2013 trial version and saved the file down to the older version, but that does not work either. Newer versions do not seem to be affected by the files, just my 2009 version. I tried creating a new file in 2013 and saved down to 2007 format. When I try to open it 2009 there is no issue. besides purchasing a new version of AutoCAD?
View 1 Replies View RelatedWhen I open a .dwg file from a saved location auto cad crashes about 35% of the way through loading. I did not have this problem when I was running Windowws XP but now I am running Windows 7.
View 6 Replies View RelatedWhats the importance of "Shell Connector Tolerance"in the create new simulation dialog box. Any example or some kind of illustration to explain this.
C1
Inventor Professional 2013
Vault Collaboration 2013
My program crashes when attempting to edit a pipe network. specifically when trying to draw a pipe the program crashes the instant I select the second point to place the pipe.
View 3 Replies View RelatedI am running 2012 inventor ultimate and when I'm in assemblies quite often the screen goes blank and starts blinking or screen goes completely bright red. I have to force shut down and re-boot. I have discussed this with dell and they have replaced the video card, they have done patches updates etc. to no avail. My computer is an M6500 64 bit with a nividia graphics card running windows 7. very high end computer and very powerful. I am also using a 3D connexion mouse. I should also mention that the screen only blinks and crashes while undocked. While docked the only problem I have is locking up occasionally.
View 1 Replies View RelatedI bought a new laptop Asus k73SV-TY081V version. When i'm working with autoCAD 2012, my videocard crashes and i get a message: "Display driver Intel Graphics Accelerator Drivers for Windows 7® stopped responding and has successfully recovered"
View 9 Replies View RelatedWhen defining a wire, to get the correct termination at each end I would like to add Virtual Parts to the Connector Pin Name properties (Select the with, RMB - Harness Properties- From To- Properties (connector Pin Name)- Virtual Parts.
Is there any way to get properties from this onto a Loom Report allied to the wire? Our current Loom drawings list the wire with the terminal connectors at either end. I have tried using GETPART1 & GETPART2 in the cfg definition but this picks up on the Part with the Pin, not the Virtual Part on the wire.
When working on an animation project our company has faced a strange problem. When switching from one network task to another 3dsmax is closed with an error, as shown in the screenshot. Since there are a lot of tasks, a number of such messages grows frightening.
Trying to get outside of a problem, we have tried all the combinations that came about. Backburner 2008 and 2012, 3dsmax 2012 with the service pack and without it, different versions of Vray, various workstations with Windows 7 and Windows 7 SP1, to no avail. As it turned out, the problem is not in the network rendering, but in the file itself.
There were no problems noticed when working with the file, but when one closes 3dsmax, there’s an error message again. Even if we clear the scene from objects, materials, and settings completely - the error remains. But most of all we were surprised by the fact that the saved cleared scene weights 86016 bytes, but an absolutely empty scene, saved right after the program was opened, takes 73729 bytes.
