It seems that even when the document was from a 2010 version, if I open it, and save it, it automatically saves it to the 2014 version cad.Is there a setting on Autocad LT 2014 that allows me to automatically save to an earlier version of CAD (2010) instead of the 2014 whenever I hit SAVE.
View 1 Replies
How do you save down to earlier version? It doesn't let me when I do a save as and click on version I want. Just gives me an error message and shuts autocad down.
I have to save 2011 drawing down to autocad 2004. I sure hope its possible. It always has been with earlier versions.
Having trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely.
Also, from time to time we get the crash when editing MText.
I have Revit MEP 2012 and created a small guest house in this program. I wanted to add some features using Revit Architecture 2011that are not available in the MEP program. When I tried to bring the files up in the Revit architecture program I get an error message that the drawing was created in a later version of Revit. Is there any way to save the MEP file back to an earlier version of Revit like one could do with Autocad drawings?
View 2 Replies View RelatedHaving trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely. It seems to be files that have aerial xrefs in them.
Also, from time to time we get the crash when editing MText.
I am using Autocad LT 2012 on Windows XP at my office computer. I Save a file in an earlier version e.g. 2004 or 2007 and email to home computer, Autocad LT 2008 on Windows Vista. The file will not open. Message is that the file has been created by a later version. THis has not been my experience with earlier versions.
View 7 Replies View Relatedusing AutoCAD '10. I have a free trial of 2013 to preview before buying and I'm doing some freelance work with an opportunity to be hired full time. The comany I am working for has a pen set that they sent to me in an e-mail. In order to send PDF's of my work back I must use this pen set. The pen files are from an earlier version of AutoCAD- 2007 and are attachments in an e-mail.
View 3 Replies View RelatedIm currently using Autocad 2008 and am in the process of creating blocks for a friend who is using 2005, i have loads that need converting or writing so that they can be opened in 2005.
View 6 Replies View RelatedI installed Photoshop CS6 - 64 bit, but Bridge keeps opening up photos in my CS5 that is still on my computer. How do I change this so that it will open the photos in Photoshop CS6?
View 9 Replies View RelatedI am currently using autocad 2002. An engineering firm has sent me a dwg file that was created using a much newer version of autocad. I asked them to save it back to version 2000, so I can open it. Well, I can open the file, but I'm getting this command "ARXERROR: eNotThatKindOfClass.. whenever I do a basic command??
Now I have gotten dwg files from other firms, and they have worked flawlessly. Would it be how this particular firm has saved the file?
I have tried to open a new drawing, and xref this drawing into it, but all the linework does not show up?
I changed the configuration in Tools/Options/Open and Save/File Save, to save as Autocad2004/LT2004 Drawing (*.dwg). But sometimes automatically the program saves as Autocad2013. It is critical for me because I work with people that still use Autocad2004.
View 6 Replies View Related have two questions:
1: I currently am using AutoCAD 2011 is there any option to back save drawings to 2008? I do not seem to have this choice.Only 2010 or 2007 or 2004.
2: If I upgrade to 2014 or 2013 will I have the option to back save to 2008?
I use a machine called a shopbot to cut wood projects. Students draw the parts in Inventor, place them into a idw and use the save copy feature to save it as a DXF file. The shopbot uses a progam called partworks v2 and it reads DXF files. This worked great for the past few years until this summer when we installed the 2013 inventor on our computers. I contacted Shopbot and they said other people are having the same problem and the solution for most of them was to save the idw file as an older version. Last year we had AutoDesk 2011 and it worked fine. how I can save a 2013 idw as a 2011 idw?
View 5 Replies View RelatedI'm having a problem with the files saved from Inventor, regardless of type. I have no problem saving new files or opening files, however, any time I try and save changes to a file, inventor crashes. Also if I try and move a file, windowes explorere gets stuck at "descovering items." Renaming a file crahses explorer.
One of the files is attached.
I would like to save my inventor Part and Assembly model file in a lower version. Like in our company we use both Inventor 2012 and 2010. Once the file is created in 2012 and when shared to 2010 users they are unable to open, is there any possiblities to open 2012 files 2010 like how we do in Autocad.
View 2 Replies View RelatedCan I install the newer version 2.8.0 and also save the old version 2.6?
View 1 Replies View RelatedIam worked at a workshop that we cut and engrave metals sheets like stainless steel and copper and am using corel draw X5 for editing , drawing and exporting cut orders to cutting machine .
I exchange cdr files with other workshops around me that they use earlier versions of corel draw like ver 11. Did theirs a way that i can save all cdr files in corel draw X5 in ver 11 with out choosing in every time i save the file version option ?
Saving edited pictures in PSE 12. Despite ticking the version set box the picture is saved a separate edited print and not in a version set. This has just started to happen, until two days ago prints were saved in a version set quite satisfactorily.
View 5 Replies View RelatedAfter saving a file as, say, an 8x10 @ 240 resolution, I want to save the image as a 4x5 @72 resolution in a different file that I can give to someone on a CD. However, the new file seems to retain the 240 resolution at a dramatically reduced size so the CD gets a too-small image (and the recipient doesn't have the software to gross it back up to a 4x5).
I assume this has something to do with cache, which I've tried purging generally and also for the individual file. I have CS6 on a Mac Pro with ample disk space and auxiliary drives to store old files, also with plenty of spare space.
I recently upgradedfrom "Elements 2" to Version 11. I previously saved all my edited work in JPEG format and to the "My Pictures" folder. I was then able to open all modified photos and share them with another computer without resorting to any specialised program. I wish to continue to do the same using Version 11. Having made several attempts without success to save modified photos using my well tried and successful method and having read the Manual to see why the process is not successful with Version 11 I am now exteremely frustrated. Each attempt to save a modified photo results in a Thumbnail icon being loaded into the "My Pictures" folder with the elements 11 logo. I then are only able to open the photo (which incidently does not carry the modified file name from the original) by way of the elements 11 program.
View 8 Replies View RelatedHow do I save a file in X5 so it can be opened in X3?
View 9 Replies View RelatedI have a a ton of images I need down saved from Version X5 to X3. Is there any way to batch save CDR's and CSL's to a lower version besides opening up every one and saving?
View 9 Replies View RelatedWe have a vendor that is still using X3 or later. I currently have X4. Is there a way to default your save selection to save down a version?
View 4 Replies View RelatedIs there a way to set CGX6 to automatically save to a lower version (X5 X4 etc) without having to select the version manually each time I save a file?
View 2 Replies View RelatedI would love to be able to customize Inventor 2013's user interface to make it look more like the older version of Inventor. You can do that with AutoCad Mechanical. You simply change the view to "AutoCad classis" and those annoying "panel bars" go away and you get a pull down screen.
View 9 Replies View RelatedCurrently using Autocad 2011. What are the advantages of using Sectionplane over the earlier Section command?Alternatively,point me towards a SIMPLE(!) tutorial or book that will explain how to use Sectionplane.
View 9 Replies View RelatedI have some issue in Trim command,.
(Please see the attached picture before read the below steps,.)
generally, I use trim command like this,.
Command: tr (enter) (enter)
select object: (I will select object which I need to trim)
it gave the results shown in the picture named "Earlier result"
But now I am getting differently like "current result"
But Earlier result is comfortable for me,.
Is this because of setting problem?
Can Autocad LT 2014 read Autocad LT 2010 files?
View 3 Replies View RelatedI have just upgraded to AutoCAD 2013. Now I have one AutoCAD 2013 and five copies of AutoCAD LT 2009. A strange problem started ovccuring after starting using of AutoCAD 2013. Quite a lot of files done with LT 2009 are not opening in AutoCAD 2013. When you tru to open this file, nothing happens and a blank new drawing is opened by AutoCAD 2013.
I have DWG TrueView from release 2010 to 2012. These files opened perfectly well in 2010 & 2012. So I downloded DWG TrueView 2013 and installed it to check whter my AutoCAD 2013 installation was faulty. These files do not open in DWG TrueView 2013 also.
I tried exporting the file to DXF in LT 2009 and then tried to open the DXF file in 2013. It gave a message that it could not read the file. The odd fact is that it is not happening with every file done in LT 2009. Some open and some do not.
In my opinion, this seems to be a serious bug in 2013. Any body else experinecing this? I am unable to attach any file as all the files are larger than 2 MB even after zipped and I cannot upload such a big file here.
Why does the justification of text created in 2013 change when I save to an earlier version of AutoCAD (2002)?
View 2 Replies View RelatedI received files in 2010 format which I converted to 2007 using true view.Now when I open in 2013 I get a message "file needs recovery" I recover and save. when I open again I get the same message in 2013.
View 3 Replies View Related
