AutoCAD 2013 :: Text Justification Changes When Saved To Earlier Versions?
Sep 20, 2012Why does the justification of text created in 2013 change when I save to an earlier version of AutoCAD (2002)?
View 2 Replies
ADVERTISEMENT
Photoshop Elements :: Using Saved Photos From Earlier Versions
Jan 8, 2014I currently have Photoshop Elements ver. 10,11, &12 on 2 computers. I have done the requested conversions to use older Elements photos. Is there a program or feature that will let me use any of these saved images on any computer, only on version 12, or are these images just lost? I have several CD/DVD sets of saved images that I am not able to access and have I lost the use of these images? Further, why does every version of Photoshop Elements need to save older images and "convert" them for the latest product version? I have used 8 different versions since Elements first came out and this problem of conversion has been a source of trouble and confusion from the start. Further, there is the problem of dispensary in the forwarded images and the "lost" connections to images.
View 1 Replies View RelatedAutoCAD 2013 :: Does Not Open Some Earlier Versions Of Dwg Files
May 4, 2012I have just upgraded to AutoCAD 2013. Now I have one AutoCAD 2013 and five copies of AutoCAD LT 2009. A strange problem started ovccuring after starting using of AutoCAD 2013. Quite a lot of files done with LT 2009 are not opening in AutoCAD 2013. When you tru to open this file, nothing happens and a blank new drawing is opened by AutoCAD 2013.
I have DWG TrueView from release 2010 to 2012. These files opened perfectly well in 2010 & 2012. So I downloded DWG TrueView 2013 and installed it to check whter my AutoCAD 2013 installation was faulty. These files do not open in DWG TrueView 2013 also.
I tried exporting the file to DXF in LT 2009 and then tried to open the DXF file in 2013. It gave a message that it could not read the file. The odd fact is that it is not happening with every file done in LT 2009. Some open and some do not.
In my opinion, this seems to be a serious bug in 2013. Any body else experinecing this? I am unable to attach any file as all the files are larger than 2 MB even after zipped and I cannot upload such a big file here.
AutoCAD 2013 :: Doesn't Open Some Earlier Versions Of DWG Files
Feb 14, 2013I received files in 2010 format which I converted to 2007 using true view.Now when I open in 2013 I get a message "file needs recovery" I recover and save. when I open again I get the same message in 2013.
View 3 Replies View RelatedAutoCad :: Saving Blocks That Earlier Versions Can Use
Apr 5, 2011Im currently using Autocad 2008 and am in the process of creating blocks for a friend who is using 2005, i have loads that need converting or writing so that they can be opened in 2005.
View 6 Replies View RelatedPhotoshop :: Maximize Compatibility Option To Save For Earlier Versions?
Sep 5, 20131. Where is the Maximize Compatibility option in CS6 to save to earlier versions?
2. Does this option still exist in CC? If so, how is it enabled?
Photoshop :: Error Message When Opening CS6 Files In Earlier Versions
Oct 23, 2012PSCS6 with 12.0.4 update. Mac OSX 10.8.2 16GB 1333 Mhz DDR3 543 GB Available
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.
Three options follow: Flatten Cancel Keep Layers
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
AutoCad 2D :: When Change Justification Of Text The Insert Snap Of Text Stays Fixed But Changes Position
Jun 22, 2011in Autocad when you change the justification of text the insert snap of the text stays fixed and the text changes position around this point.
Using the JUSTIFYTEXT command you can change the justification of the text without changing its position. However this command is operated through the command bar of dynamic input. What I would like to do is to have the justification change in the quick properties this way.
AutoCAD Map 3D :: Export Text Justification To SDF?
Jan 13, 2012what property do you choose to export the Text justification to SDF?
View 2 Replies View RelatedAutoCad :: Change Justification Of Leader Of Multileader Text?
Jan 10, 2012I don't normally deal with multileaders with text although a drawing I have has been done with these.
The leader is justified to the left of the text. If I drag the position of the leader head to the right hand side of the text, the leader still starts from the left hand side of the text (goes at the bottom of the text) so how would I justify the leader position of a multileader to the right hand side of the text?
I had a quick look in the properties pane earlier although am fairly busy and it is only a trivial issue.
AutoCAD 2010 :: Change Default Text Justification
Aug 23, 2012Is there any way that you can change the default justification of dtext?
View 2 Replies View RelatedPhotoshop :: Earlier Versions Of Photoshop
Nov 20, 2005Does anyone know where I can purchase an earlier version of Photoshop? Maybe PS 7.0. Because I simply cannot afford the latest version (CS2 I think). I use 7.0 a lot at school and really like it. If I could get CS2, I would but it would take me ages to save up for it on what I'm earning.
View 9 Replies View RelatedAutoCAD Inventor :: Customize 2013 GUI To Look Like Earlier?
Jul 31, 2012I would love to be able to customize Inventor 2013's user interface to make it look more like the older version of Inventor. You can do that with AutoCad Mechanical. You simply change the view to "AutoCad classis" and those annoying "panel bars" go away and you get a pull down screen.
View 9 Replies View RelatedAutoCAD LT :: 2009 Mechanical Drawing Save As 2007 - Text Justification Is Off
Apr 5, 2013When the senior engineer at our company opens my acad drawings all of the text justification is off.
I'm using acad 2009 mech and saving as to 2007.
He is using 2007 LT?
AutoCAD 2013 :: Transferring Pen Files From Earlier Version
Jun 14, 2012using AutoCAD '10. I have a free trial of 2013 to preview before buying and I'm doing some freelance work with an opportunity to be hired full time. The comany I am working for has a pen set that they sent to me in an e-mail. In order to send PDF's of my work back I must use this pen set. The pen files are from an earlier version of AutoCAD- 2007 and are attachments in an e-mail.
View 3 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Text Justification Alert Message Not Working
Aug 28, 2011lsp.I could not able to find error.
(defun c:t5()
(setq entname (entget(car(entsel))))
(setq thjh (cdr (assoc 72 entname)))
(setq tvjv (cdr (assoc 73 entname)))
[Code]....
AutoCAD 2013 :: Slow Over Network All Versions
Aug 14, 2013We're an IT company that installed a new NAS for all the data in a architectural office.They are using AutoCad 2011 / 2012 / 2013LT / Revit 2011
Since we installed the new NAS and copied all the data from the old one, opening and saving files takes too long. Sometimes the files hang while regenerating. Saving can take up to more then 4 minutes.
Other applications, for example photoshop, work fine. Copying files from the local disk to the network drive, even moren than 100MB works fine.All computers have windows 7 and the NAS is from Synologie.We tried reinstalling AutoCad but that doesn't solve the problem.We tried setting the savefidelity to 0 but that doesn't solve the problem.
AutoCAD 2013 :: Saving To Older Versions
Apr 2, 2013I had autocad 2013 but it was infected with a virus so i was obliged to install 2012 version. problem is that all my files are saved as 2013 and would not open in 2012. How to save all files at once to older version?
View 8 Replies View RelatedAutoCAD Inventor :: Can Prior Versions Access Current Versions Of Vault
May 15, 2013Can prior versions of inventor access current versions of vault?As in, can Inventor 2010 access vault 2013? Or does it have inventor 2013 and vault 2013?
View 2 Replies View RelatedAutoCAD LT :: Opening 2013 Documents In Older Versions?
Nov 6, 2012I have created .dwg drawings in AutoCAD LT 2013 and have found that people with older versions of AutoCAD cannot open them. Is there a generic overall version of AutoCAD that I can save my drawings in that would be accessible to all versions of AutoCAD?
View 7 Replies View RelatedAutoCAD LT :: 2013 Unable To Save Files For Older Versions?
May 24, 2012I have a newly downloaded version of AutoCAD LT 2013 that will not save files in older formats for autocad 2004 and 2007. When trying to save the user gets the following error message "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created."
I did some searching in the discussion groups and it appears that this is a known/common issue with autcad lt 2013. Is there a work around to saving it in a format that older autocad applications can view?
AutoCAD 2013 :: Migrating Settings From One Computer To Another With Differing Versions?
May 8, 2012One of our drafters recently got a new computer. We installed AutoCAD 2013 on the new machine. He was using AutoCAD 2012 on the old machine.
After exporting the settings from 2012, I attempted to import them into 2013. The migrate tool throws an error that insinuates you must have the old version installed on the same computer in order to migrate the settings. The import tool states that it can only import settings from the same version of AutoCAD.
How does one go about importing settings from one computer running AutoCAD 2012 onto another computer running AutoCAD 2013?
(In particular, the user is looking to migrate over his custom tool palette.)
AutoCAD 2013 :: Network License Manager Works With Any Versions?
Aug 13, 2013I installed the Network License Manager in a Windows 2008 Server ( I installed theNLM using the CD of AutoCAD 2013). The AutoCAD 2013 works fine in the clientmachines, but the 2011 and 2012 version don´t. In the page of Autodesk, on ManageSerial Numbers, I can see the Serial Number for 2011, 2012 and 2013 Suites. Why theAutoCAD 2011/2012 don´t work in the client machines? Note: in the 2011/2012 versionappears the message " A valid license could not be obtained by the network licensemanager. If you are still unable to access a license, contact your systemadministrator. Error [-96.7.11001] ".
View 1 Replies View RelatedAutoCAD 2013 :: Importing Saved UCS
Mar 16, 2013Is there command, or lisp to import saved UCSs in 2013?
View 3 Replies View RelatedAutoCAD 2013 :: Drawings Not Opening With Saved Name
Jun 26, 2013When I open a drawing in Autocad 2014, the drawing name opens as drawing1 or drawing2, etc. The files have been saved with a drawing name, however when I open them after saving they open as a unsaved file.
View 1 Replies View RelatedAutoCAD 2013 :: Can't Open Saved DWG Drawing
Feb 22, 2013I'm in AutoCAD 2013. I've been working on a drawing everyday (was just working on it yesterday), but can't open it now. I just get a blank gray screen when I open if from within AutoCAD. When I open it from my computer drive while AutoCAD is closed, AutoCAD opens and I get "Drawing1.dwg." I've tried the RECOVER command, but I don't get a response. I tried RECOVERALL command which let me choose a file to recover, but it responded saying it could not recover the drawing.
View 6 Replies View RelatedInDesign :: Show Text Box Frame Outline Like Older Versions
Feb 18, 2014I just started using the new Indesign CC and one of the features that I miss is the blue outline that would appear around textboxes. It would allow me see where my text was and move it around. The new Indesign CC displays text, but with no outline around the text, which makes it difficult to re-adjust the box size and move around my text.
Is there a way to enable the text box outline to show when designing (not when printing) as the previous verisons of InDesign did?
AutoCAD Dynamic Blocks :: Flip Attribute Justification?
Jan 27, 2009I've built this nifty block for holdowns, but the attributes get all goofy on me when I use the flip command. The problem is that the justification of the attributes does not change when they are flipped - so if I modify the text in the attribute while the block is in the FLIPPED state, how to modify the justification?Check out the attached file to see what I'm talking about. The block instances are numbered so you can follow along:
1. block is inserted
2. attribute text is modified in NOT FLIPPED state - everything is dandy
3. block is flipped
4. attribute text is modified in FLIPPED state - text justification is jacked up
5. block is flipped again, in order to demonstrate the continued jacked-uppedness of the attribute
AutoCAD Inventor :: Revision Table Description Justification
Jul 13, 2009is there a way to set the justification to left in the revision table justification? I've tried playing with the formats and I can't get it to do anything but be centred.
View 9 Replies View RelatedAutoCAD 2013 :: How To Edit DWF File Saved In PDF Format
Feb 28, 2013I want to know how to open a dwg file that has been saved as a pdf file format so i can edit it.
Why do people save it to a pdf anyway? Doesn't that degrade the quality of the drawing?
I have a lot of clients that send me there drawing but i constantly have to tell them that they have to send the original form if they want it to be edited. Most of the time I have to use a converter to to convert it to a dwg file but the quality degrades drastically. I can’t believe in 2013 I’m still having problems with this.
I’ve tried Any PDF to DWG Converter but it doesn’t convert it very well.
AutoCAD 2013 :: Check With Which Version Drawing Is Saved?
Apr 3, 2013How can I check with which autocad version a drawing is saved?
View 8 Replies View Related