AutoCAD 2013 :: How To Edit DWF File Saved In PDF Format
Feb 28, 2013
I want to know how to open a dwg file that has been saved as a pdf file format so i can edit it.
Why do people save it to a pdf anyway? Doesn't that degrade the quality of the drawing?
I have a lot of clients that send me there drawing but i constantly have to tell them that they have to send the original form if they want it to be edited. Most of the time I have to use a converter to to convert it to a dwg file but the quality degrades drastically. I can’t believe in 2013 I’m still having problems with this.
I’ve tried Any PDF to DWG Converter but it doesn’t convert it very well.
View 5 Replies
ADVERTISEMENT
Oct 4, 2013
Basically I open a jpg file for editing in photoshop elements and then use "save as" to save my edited project as a jpg with a new filename in a local picture folder.
My new file however shows as
File Type: File
It will not open! the file wants me to associate a program to open it with and If I select photoshop to open the file I get a warning dialogue "Cannot open 2.5 3 Core TQ Rubber Flex because it is the wrong type of file"
This is the version of photoshop and my system info
Adobe Photoshop Elements Language Version: 10.0.0 (10.0 (20110831.m.17215))
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Here is an example of one of these image files as seen on my pc.
View 2 Replies
View Related
Jun 27, 2011
I have just installed C3D 2012 and when I show the menu bar, the only choice is Express which used to be the last tool in previous versions. What happened to File - Edit - View - Insert - Format, etc in the menu bar? I need to access them.
View 4 Replies
View Related
Nov 7, 2013
Is it possible, in AutoLISP, to code something that will save the current file (whatever it may be, assume ..dwg or .dxf, into R2000 .dxf?
View 9 Replies
View Related
Jan 24, 2013
Our company recently upgraded to new computer and software. After installing CS6 Photoshop I was trying to edit a rgb format file, but there was no option for SGI rgb. For earlier versions of Photoshop we were told to download 3 party plug-in to get this format to work. Our IT person said that the 3 party plug-in can no longer be used with CS6. I have a majority of my files as rgb and would like to edit these files, how can I do this? Is there a option during CS6 install for getting this format?
View 2 Replies
View Related
Feb 5, 2012
How do edit a text on a saved file that was created from unknown program?
View 1 Replies
View Related
Sep 28, 2013
I made with AutoCad particular drawing that i need to convert to SDR format .
View 3 Replies
View Related
Jan 30, 2013
I want to convert bmp to dwg/dxf file so I can use in Autocad LT 2013. Any such program?
View 4 Replies
View Related
Dec 17, 2012
I attached DGN file in dwg, the same way of attaching any exrefrence. I would like to make changing the this attached file. It does not respond as block or xref.
How can I edit this DGN in the AutoCAD?
View 2 Replies
View Related
Aug 23, 2011
I get the message "One or more objects cannot be saved to the specified format" when using Architecture 2011 and 2012. My other other machines running the same software have no problem. Have purged and audited but it still does it.
View 5 Replies
View Related
Jun 25, 2013
Is there a file I can manually edit to add my support file paths? Just had another crash that lost all of them and don't want to have to manually add them one at a time.
View 3 Replies
View Related
Nov 16, 2011
In 2011 every so often I get this error "One or more objects in this drawing cannot be saved to the specified format. The operation was not completed and no file was created." This happens and I just go and click file or regen and sometimes it just saves the file other times it does not.
View 9 Replies
View Related
Jan 29, 2013
Users: Windows 7, AutoCad 2011 update 2 applied
Windows Server 2008 r2
Data stored on a network share
Network licenses on a separate server
My problem started when we moved all of the users data to a new Windows 2008 r2 server. Searching and file navigation was slow so we turned on Windows Search service. Greatly improved network searches (users do content as well as file name searches).
Then Autocad started having errors when trying to save or create dwf files. The error "One or more objects in the drawing cannot be saved to the specified format. The operation was not completed and no file was created." Users can save the drawing to the local drive without the error.
View 6 Replies
View Related
Mar 12, 2013
I want to edit some values in the data table of a shape file (*.shp) with AutoCAD Map 3d 2013. Every time I alter a value in data table it takes about 30 seconds until AutoCAD Map saves (?) the value. I have to wait 30 second until I can continue working. Why is this so slow?
The shape file has 7000 lines and is stored on a local drive.
View 5 Replies
View Related
Jun 29, 2010
We’re working in AutoCAD 2010 but need to save as 2007 DWG. AutoCAD is set in Options to save to 2007 format, and all files - host and reference - are or should be in that format.
Something is triggering an automatic save of the xrefs. The xrefs are not being edited, in-place or otherwise, but every so often I get a balloon message saying the xref has changed and I need to update it. So I update it, and when I check the file format, I find it’s been saved in 2010 DWG.
Other people on the project are also having this problem. Engineers on this project are using 2009 and keep coming to us and asking where the xrefs are.
This is AutoCAD 2010, "English Version 3" running in XP2 SP3.
View 5 Replies
View Related
Nov 14, 2013
We've recently upgraded a large project from Civil 3D 2012 to Civil 3D 2014 and for the most part things have migrated well.
On this project as well as others that have been migrated, I've been noticing this and similar messages re: modified in a previous version when the dref's synchronize:
"FG-STREET A was modified in a previous version of the software. Changes in the current were overwritten when the data reference was synchronized."
The steps we used for converting this project in order are:
Set Data shortcuts working folder.
Migrate Survey Database.
Open/save base drawing containing survey & EG surface.
Open/save all C3d source dwgs before opening any plan sheets.
Open/save all C3d plan sheets.
Because of the warning message I thought I'd try the "Migrating Data Shortcuts" following the instructions.
Use the stand-alone Data Shortcuts Editor to save one or more data shortcuts to a specified folder. If the shortcuts were created with a previous version of AutoCAD Civil 3D, they will be updated to the current format in this process.
When following the steps in the Data Shortcuts Editor, when I get to step 5, select the folder & choose Saveas, I see the following message that they will be saved in 2009 format?
Isn't that a downgrade? How these modified in a previous version messages?
I'm still trying to figure out if they are a benign message or if they are something I should be concerned with. 95% of the shortcuts on the project sync normally & seem to work fine other than an occasional disappearing profile in the sheet profiles.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 7 Replies
View Related
Sep 25, 2013
What is the best export/import format for sending 3D files. I need some neutral format files, possibly Solidworks but I am not sure. Also any export settings to make sure I get decent quality files.
Nothing like getting a surface model when you want solid model.
IV2014 sp1.2 PDSU / Sim Mech 2014 /
Win7-64
EVGA X79 - Classified, iCore7 3930k 32Gb Quad-Channel
950Gb (2 x 500Gb Sata III SSD RAID0 Adaptec 6805E Controller)
Nvidia GTX-690 Classified - 331.82
SpacePilot Pro 3.17.1, 6.17.7, 4.11
View 9 Replies
View Related
Mar 12, 2013
When a raw file badge shows that the file has been changed, I use Metadata Save to File & for the large majority of my images, the badge goes away and Metadata Status Changed does not show the file. For some of my files, however, the Save to File command doesn't work properly. If I am only displaying files with changes, the file briefly disappears, then returns. Even if I go to Windows Explorer and delete the xmp file, then again Save metadata to file, it pops up again with the badge saying it needs to be saved. I'm using Lightroom 4.3 64 bit on Windows 7.
View 12 Replies
View Related
Jun 20, 2012
I've downloaded a photo from the net and then opened with photoshop, its an image with a white background so using magic wand tool I selected the white areas and deleted them. After this I went to save for web and have saved as PNG and GIF format with the transparency box checked but then when I open the image on my site the damn white background is still there.
View 9 Replies
View Related
Jan 15, 2014
I have saved my photos in RAW format and imported them into Lightroom. I have then made changes to them and exported them from Lightroom as JPEG files. However, when I go to a printing kiosk and get the photos printed, they are all darker than what they displayed in Lightroom. What do I need to do to be able to print accepable photos?
View 3 Replies
View Related
Aug 12, 2013
CS6: why does a TIF image saved to Jpg format becomes so small?
tif = 292700 kB becomes Jpg = 936 kBJpg options: large file Quality 12, format option: Baseline standard.
View 10 Replies
View Related
Nov 14, 2012
As many of us seam to do the option to save by default to an older version of AutoCAD or universal DXF format is selected, my problem is however when you save an existing drawing a prompt appears asking if 'Drawing*.dxf last saved in AutoCAD 2004 format. Save in AutoCAD 2013 Drawing format?' this has annoyed me for years!
I have set it as default DXF 2014 for a good reason I don’t want a prompt asking me if I want to then save it as 2013 or I would have set it like that on my default setting, gets on your nerves when you are doing 100's of files.
Win7 64 Pro - Asus P8P67 PRO - i5-2500k CPU O/C@4.5Ghz- OCZ Vertex 2 SSD - 8GB Ram - GTX550 Ti - SpaceExplorer.
View 5 Replies
View Related
Oct 21, 2011
I can't see a way to search for this issue that seems faster then looking manually. X4 will open X3 jpg's, but not X3 TIF's. X4 will open the older PSP files, but X3 TIF's show up as black rectangles in X4 workspace and won't open. I've uninstalled X3 already, but do not consider re-installing it as a solution. Previous versions of PSP have been backward compatible for me. If I open a RAW file, edit it and save as a TIF, it will open.
View 3 Replies
View Related
Aug 16, 2013
I have an auto CAD DWG sent to me with a 2013 FORMAT, and i can't open it with 2010 AutoCAD.
View 2 Replies
View Related
Apr 10, 2013
I created and saved several files today, both as .ai and as .pdf. Then I quit illustrator. Now when I re-open the files, they are opening as .ai* (with the astrisk) and I can not edit them. How do I edit them?
View 1 Replies
View Related
Apr 4, 2013
I have a sheet list table setup and want to change the format for how the date shows up in a row. Is there a way to format each row/column?
View 9 Replies
View Related
Aug 7, 2013
I have many texts fields in my drawing. I need edit the format of all field. e.g field - 1030.60 convert to - 1.030,60 Is there any lisp doing that? I mean, select multiple field and change it.
View 3 Replies
View Related
Mar 16, 2013
Is there command, or lisp to import saved UCSs in 2013?
View 3 Replies
View Related
Oct 16, 2013
When in Lightroom 4 and i want to edit in photoshop essentials, LR always creates and saves a psd file before opening Essentials. How can I stop this happening because it is a nuisance. For example if I am editing 4 files in PS I dont want LR to create these additional files at all. I am using a PC
View 5 Replies
View Related
Mar 31, 2014
With LR 5 & OS 10.9.2, how do I edit and add to a Saved Blurb book?
It seems impossible to add photos after installing Maverick without starting over from scratch.
View 1 Replies
View Related
Jun 26, 2013
When I open a drawing in Autocad 2014, the drawing name opens as drawing1 or drawing2, etc. The files have been saved with a drawing name, however when I open them after saving they open as a unsaved file.
View 1 Replies
View Related
