Does anyone know where I can purchase an earlier version of Photoshop? Maybe PS 7.0. Because I simply cannot afford the latest version (CS2 I think). I use 7.0 a lot at school and really like it. If I could get CS2, I would but it would take me ages to save up for it on what I'm earning.
View 9 RepliesI currently have Photoshop Elements ver. 10,11, &12 on 2 computers. I have done the requested conversions to use older Elements photos. Is there a program or feature that will let me use any of these saved images on any computer, only on version 12, or are these images just lost? I have several CD/DVD sets of saved images that I am not able to access and have I lost the use of these images? Further, why does every version of Photoshop Elements need to save older images and "convert" them for the latest product version? I have used 8 different versions since Elements first came out and this problem of conversion has been a source of trouble and confusion from the start. Further, there is the problem of dispensary in the forwarded images and the "lost" connections to images.
View 1 Replies View Related1. Where is the Maximize Compatibility option in CS6 to save to earlier versions?
2. Does this option still exist in CC? If so, how is it enabled?
PSCS6 with 12.0.4 update. Mac OSX 10.8.2  16GB 1333 Mhz DDR3 543 GB Available
Â
I've recently become aware that other people are getting an error message when opening many of my my psd files if they are on earlier versions of PS and also on PSE, (including the latest version). The message is:
Â
This document contains unknown data which will be discarded to keep layers editable. To preserve the original appearance instead, choose flatten to load composite data as a flattened image.Â
Â
Three options follow: Flatten Cancel Keep Layers
Â
When 'keep layers' is selected the file opens as normal. However, people with much earlier version (CS version 8) don't get the option to keep layers, and the layers are flattened when the document is opened.
Â
I still have CS5 on my mac, and I find that if I take my finished file into CS5 and save it there, the customer does not get the message above, and the file behaves as it should. Those on very early version of PS can also open the files without any issues.Â
Â
I've been using CS6 since it was released and have had to delve through all my files and save them in CS5. Not every file is affected and I've been unable to find a common thread.
Im currently using Autocad 2008 and am in the process of creating blocks for a friend who is using 2005, i have loads that need converting or writing so that they can be opened in 2005.
View 6 Replies View RelatedI have just upgraded to AutoCAD 2013. Now I have one AutoCAD 2013 and five copies of AutoCAD LT 2009. A strange problem started ovccuring after starting using of AutoCAD 2013. Quite a lot of files done with LT 2009 are not opening in AutoCAD 2013. When you tru to open this file, nothing happens and a blank new drawing is opened by AutoCAD 2013.
I have DWG TrueView from release 2010 to 2012. These files opened perfectly well in 2010 & 2012. So I downloded DWG TrueView 2013 and installed it to check whter my AutoCAD 2013 installation was faulty. These files do not open in DWG TrueView 2013 also.
I tried exporting the file to DXF in LT 2009 and then tried to open the DXF file in 2013. It gave a message that it could not read the file. The odd fact is that it is not happening with every file done in LT 2009. Some open and some do not.
In my opinion, this seems to be a serious bug in 2013. Any body else experinecing this? I am unable to attach any file as all the files are larger than 2 MB even after zipped and I cannot upload such a big file here.
Why does the justification of text created in 2013 change when I save to an earlier version of AutoCAD (2002)?
View 2 Replies View RelatedI received files in 2010 format which I converted to 2007 using true view.Now when I open in 2013 I get a message "file needs recovery" I recover and save. when I open again I get the same message in 2013.
View 3 Replies View RelatedCan prior versions of inventor access current versions of vault?As in, can Inventor 2010 access vault 2013? Or does it have inventor 2013 and vault 2013?
View 2 Replies View RelatedI use photoshop CS5 on windows 7.
Â
Been working on a file with a few layers, then the power goes out so my computer "crashes". When I reboot my computer, I am unable to open the file I was working on earlier and instead, get the message "Could not complete your request because it is not a valid Photoshop document." The file is still .psd and I don't have a preview for the file anymore:
Â
Is there anyway to recover the file?
I installed Photoshop CS6 - 64 bit, but Bridge keeps opening up photos in my CS5 that is still on my computer. How do I change this so that it will open the photos in Photoshop CS6?
View 9 Replies View RelatedIt seems that even when the document was from a 2010 version, if I open it, and save it, it automatically saves it to the 2014 version cad.Is there a setting on Autocad LT 2014 that allows me to automatically save to an earlier version of CAD (2010) instead of the 2014 whenever I hit SAVE.Â
View 1 Replies View RelatedI've used all kinds of programs and recently bit the bullet and got CS4. I wanted to buy a book on it going further in depth with the software, but I keep finding Photoshop 7 books but not on CS4. So my question is whats the difference? everyone I talked to said CS4 is the best but I don't know the difference, from using the program with out really knowing the ins and outs of it I like it. I keep getting the hand of death sometimes but i'm able to get it working right again. so what is the difference between PS 7 and CS4?
View 1 Replies View RelatedHaving trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely. It seems to be files that have aerial xrefs in them.
Also, from time to time we get the crash when editing MText.
I would love to be able to customize Inventor 2013's user interface to make it look more like the older version of Inventor. You can do that with AutoCad Mechanical. You simply change the view to "AutoCad classis" and those annoying "panel bars" go away and you get a pull down screen.Â
View 9 Replies View RelatedHow do you save down to earlier version? It doesn't let me when I do a save as and click on version I want. Just gives me an error message and shuts autocad down.
I have to save 2011 drawing down to autocad 2004. I sure hope its possible. It always has been with earlier versions.
Currently using Autocad 2011. What are the advantages of using Sectionplane over the earlier Section command?Alternatively,point me towards a SIMPLE(!) tutorial or book that will explain how to use Sectionplane.
View 9 Replies View RelatedWhen choosing an Import-preset with "Make a Second Copy To" selected and the external drive is not connected (e.g. working on location, ejected ext. drive temporarily), LR starts the copy process to primary location first. Only after copying LR notices that second copy location is offline, displays a warning dialog and won't start preview rendering until warning dialog is dismissed. But user might have left his computer to grab a coffee since rendering eats up CPU power.
Â
Result, Problem:
1. Processing time is lost if user comes back to computer after intentionally taking a break only to discover that computer will be slowed down under processing load again.
2. Files have to be backed up manually. If "eject card after import is selected", user even has to re-insert card again.
Â
Solution A: When Import with backup to external drive is selected, check and warn immediately if drive is not connected.
a) Import button is greyed out with a little red ! or some sort of indicator. User is asked to connect drive or skip backup this time
or
b) Warning dialog is displayed immediately after clicking Import button. Options as in a) are given. Disadvantage: user might miss warning, if sound turned off and turns away from computer immediately after clicking.
Â
Solution B: Allow drive re-connect and copying later
1. Copy to primary location
2. Copy to second location, skip if drive not connected
3. Render previews
4. Display message "The following files could not be copied..." with added new feature "Please connect drive, then selct "copy now" button.I am using Lightroom 3.6 on Mac OS 10.7.2
I am using 64-bit windows 7 machine and have master collection CS5.When I install CS5, I notice both 32-bit and 64-bit versions are check. If I install 64-bit PS, would the 32-bit program be useful at all?
View 4 Replies View RelatedI've got a few Photoshop actions that I've been using for personal projects, and I'm considering releasing them to the public. I'd like to make them as version compliant as possible, to suit a wider audience.
What I'm wondering is, if I've created actions in CS (PS v8), how far back in versions would the actions work? I've heard some people say version 7, but I couldn't get a definate answer.
I want to make some actions that will be able to work in different versions of PS (I think the 3 that we use are 5, 7, and LE). Don't worry, most of the actions will be select all, copy, paste, save, ect. Simple things that are open in all vers.
(Am I remembering right that LE doesn't have actions?)
Any who, how could I make actions work in all of these different versions? Make the actions in 5 and load them into 7? I would prefer to make them in 7,
if one could run CS2 and CS4 on the same machine without problems. I ask this, because I currently have CS2 and have been researching the possibility of buying CS4. I don't want to do an upgrade, because I want to keep my CS2 around for a while to make sure I get along with CS4.
View 6 Replies View RelatedI have some issue in Trim command,.
(Please see the attached picture before read the below steps,.)
generally, I use trim command like this,.
Command: tr (enter) (enter)
select object: (I will select object which I need to trim)
it gave the results shown in the picture named "Earlier result"
But now I am getting differently like "current result"
But Earlier result is comfortable for me,.
Is this because of setting problem?
Can Autocad LT 2014 read Autocad LT 2010 files?
View 3 Replies View RelatedI am using Autocad LT 2012 on Windows XP at my office computer. I Save a file in an earlier version e.g. 2004 or 2007Â and email to home computer, Autocad LT 2008 on Windows Vista. The file will not open. Message is that the file has been created by a later version. THis has not been my experience with earlier versions.
View 7 Replies View RelatedI have Revit MEP 2012 and created a small guest house in this program. I wanted to add some features using Revit Architecture 2011that are not available in the MEP program. When I tried to bring the files up in the Revit architecture program I get an error message that the drawing was created in a later version of Revit. Is there any way to save the MEP file back to an earlier version of Revit like one could do with Autocad drawings?
View 2 Replies View Relatedusing AutoCAD '10. I have a free trial of 2013 to preview before buying and I'm doing some freelance work with an opportunity to be hired full time. The comany I am working for has a pen set that they sent to me in an e-mail. In order to send PDF's of my work back I must use this pen set. The pen files are from an earlier version of AutoCAD- 2007 and are attachments in an e-mail.                                                         Â
View 3 Replies View RelatedWhat versions of Photoshop (not Elements) are compatible with Windows XP 32 bit?
Â
Is it CS3 and any version under?
I have CS5 and Camera Raw 6.7.
I have Lightroom 3.6 and I want to upgrade to Lightroom 5.
Â
I cannot move to CS6 nor CC.
Â
I will be buying a new camera, with RAW files are not supported in Camera Raw 6.7.
Â
If I install camera raw 8 with Lightroom 5, will I be able to:
- use Camera Raw 8 with CS5
- if not, will I be able to have both versions of Camera raw, 6.7 and 8, on my computer and use 6.7 with CS5 and v8 with Lightroom?
Â
or would it be simpler to just convert the RAW files to DNG and use in both Lightroom 5 and CS5?
In Photoshop CS6, I can't set my workspace to the way it was in previous versions. I especially need the horizontal toolbar that goes under the top menus. I would use it for paths or gradient options for example.
View 1 Replies View RelatedIn Photoshop CS3 is there a way to save a file so it's compatible with CS2? I'm working on a file in CS3 and when the file is opened in CS2 there are "layer is corrupt" errors.
View 3 Replies View Related