It is possible to save from AutoCAD 2012 Mechanical back to REGULAR AutoCAD 2006 Lite? I am updating files on my computer with 2012 Mechanical but have to email them back to the original computer (which only has AutoCAD Lite) to print them out. I wouldn't think it would matter if the save format is AutoCAD Mechanical 2006 as long as it is still a .dwg file, correct?
View 5 RepliesWhy Autocad 2011 and Autocad 2012,Will occur on some computers,Can use the "_.layer" be executed,Some do not?Because on the Autocad 2006 can be executed.
View 1 Replies View RelatedI have a user that is getting what appears to be streaks on his drawings.
The video card has the latest driver.
I ask how often this happens and he states:
Almost every time I have a large 3d drawing ..or multi 3d drawings open (which is often the case)
I have code that works just fine in AutoCad 2010 (just plain ol' AutoCad), but will not run completely in AutoCad Mechanical 2012. The code will draw lines, arcs, circle, plines, etc. as well as insert blocks. The command to insert the block has the entire block path so I don't have to rely on setting that up for everyone.
In AutoCad Mechanical only the blocks show up. No lines, arcs or anything else is drawn. I do not use a command method (like in LiSP) to create those objects, I create them through the block table and block table records.
What do I have to do to get my code to run in AutoCad Mechanical 2012?
how to import Mechanical Desktop 2009 files into Inventor 2012
View 1 Replies View RelatedI have been using AutoCAD 2006. Our company is switching to AutoCAD 2012 LT. I want to be able to add my custom toolbar buttons from the 2006 to the 2012 LT custom Ribbon Tabs & Panels. I have figured out how to make the custom ribbon, tab and panel. I just haven’t figured out what I need to do to get the old stuff to where I can add them to the panels.
I have custom 2006 buttons with and without flyouts.
I am wanting to create a .ipt (part) file in Inventor 2012, save it as a .stl file, and open it up in Project Falcon to test it in the wind tunnel.How do you save an .ipt file as a .stl file in Inventor 2012? I hav tried going to "Save as..." and changing the extention to .stl, but not luck there.
View 3 Replies View RelatedWhenever I customize some keyboard commands, they always seem to reset after I close and re-open Inventor. I'm not quite sure how I could be missing something. I've gotten very use to these commands in previous versions. Once I setup my commands, I am able to use them for the session.
Inventor 2012 Ultimate/XP Pro
Having trouble with AutoCAD 2012 when saving to earlier versions? I can't save it down to any other version except for 2012, without the system crashing completely.
Also, from time to time we get the crash when editing MText.
We have AutoCad LT 2012 version. We encounter fatal error when we save the drawing. we cannot finish our job because everytime we save our work it will show a messsage FATAL ERROR.
View 5 Replies View RelatedI cannot get text from MoGraph menu in Cinema 4D. Only can get from Spline options. Then I cannot put color, depth nor do anything with these text.
View 1 Replies View RelatedI just got a new Imac for my workspace and I am running AutocadLT 2006 on the windows virtual machine. When I open files from my shared network they are coming up without any toolbars???What can I do to fix this.
View 7 Replies View RelatedI have a new computer and I am running windows 7. Autocad tells me windows 7 is not compatible with my 2006 version.
View 4 Replies View Relatedhow can i open DWF format in AutoCAD2006
View 1 Replies View RelatedIm using Autocad LT 2006.
im having wired situation where all the geometry are appear in Layout mode but not in Model mode. i've tried to zoom extents but nothing.
there were lots of layers that been frozen, i unfroze them and they all appear , but again only in the Layout mode.
in the Model mode, i can see that all layers are tagged as frozen, but i cant unfreeze them.
i guess if i can unfreeze them i can see them in the Model mode.
Have an Illustrator document that I would like to import to Cinema 4D Lite. Launched After Effects and opened a C4D project, dragging the .AI file and C4D says 'Unknown File Format'. What file format should Illustrator Documents be saved to to import into C4D?
View 8 Replies View RelatedI have version AE 6 CC but I am not able to access Cinema 4D lite. I just updated the program, and it still not working.
View 4 Replies View RelatedVery excited to be using Cinema 4D Lite and I'm very imprssed with what you get out of the box.
I looked at the side by side table for all the cinema 4d versions and the table says C4D Lite DOES support extruding, but every time I try to extrude a face the quick keys don't work, the menus that a tutorial shows aren't there.I can do this basic modeling task in lite?
How to use Cinema4D lite with no opening After Effects CC ?
Open a 3D object Photoshop-type in After Effects CC (without C4D)
When I save a render as PNG and then open it in Photoshop, it doesn't have the alpha channel, just R,G & B channels. The PNG Configuration Setup when saving the image has of course Alpha channel box checked, but is not available when I open the file in Photoshop.
Note: I was able to do this in 2008 version.
We are moving from 2006 AutoCAD Map to 2013 Map 3D. When I do an overlay of files in 2013 Map 3D which was (X-REF) in 2006 the files don’t align, some do some don’t. I didn’t have that problem in 2006 or any other software. I have tried adding a coordinate system to the file to see if it mattered but it didnt unless I'm doing it wrong. I have just started working with 2013 Map 3D,
View 3 Replies View RelatedIs there a way to connect Map 3D 2006 to an ArcIMS database, and view the data as a raster image overlay? This would be a very useful capability, but although I've come across ways of connecting directly to the ArcSDE server, I can't find any way of viewing data from ArcIMS.
View 3 Replies View RelatedHow do you install new hatch patterns in LT2006. Where are the pat files?
View 8 Replies View Relatedhow to resize window "drawing properties" in autocad 2006 for custom value
View 3 Replies View RelatedMy system crashed and it apparetnly effected AutoCAD 2006 LT. All my toolbars disappeared, etc. I now have it all back the way it was except for my right-click menu is all mess up.
Regardless if an object is selected or not, the Snap Menu appears, instead of the one I was used to (that included Erase, Move, Copy Selection, Scale etc. ). How can I get that back?
how to import my 2006 ctb files into 2013. I found 2006 file thru options, file, plotter path. Copied to plotter path in 2013. It showed up but did not plot correctly.
View 4 Replies View RelatedCan I take a block that is currently in my drawing and put it into a tool palette? I know how to move blocks from the Design Center to a Tool Palette but I don't know how to get my blocks into the Design Center.
Scenario: We use a number of different fasteners in our drawings but they aren't the fasteners that are currently in the Design Center under "fasteners". I am manually redrawing the same fasteners each time I start a new drawing.
If the Pro X3 Service Pack includes dealing with AVCHD Lite video files?
It says "...the update provides: Updated camera support – broadened MPEG-4 capabilities add support for additional cameras, including selected cameras from Flip, Canon and more "
Just bought a Panasonic Lumix DMC-Zs7 wich shoots AVCHS Lite HD video and a lesser quality .MOV files as well. I wanna know if Prox3 can deal with these before I upgrade!! I have Prox2 right now.
I am editing a video using VS X3 and am using both AVCHD 1080i and AVCHD lite 720p clips.
What would be the best format to retain quality when I render as a file and then copy onto a USB stick to play on my Bluray player? My player seems able to read most formats.
I have a live shot that I have 3D Camera Tracked using the built in AE plugin. I select 'Create new Camera and Solid'. AE creates a new 3d tracked camera and a solid. I save my comp. I go to 'File-Export-Maxon C4D', and create a new .c4d file. I import that file to AE, and put it in my comp. I go to 'Edit--Edit Original...'. C4D Lite opens up. I can see a new null, with a plane and camera inside. Everything looks great, but the camera has no animation on it. Upon closer inspection, I realize that none of the keyframes from my AE camera have been exported to my C4D camera.
I've tried exporting a new camera to C4D in as many ways as I can think of. The other strange thing was that the 'Merge Camera' button in the Cineware plugin in AE is grayed out, no matter how many new cameras I make. I've even made my own cameras and animated them without using the 3d Tracker plugin and it never exports correctly. I've also tried reinstalling C4D Lite.
Our office upgraded to AutoCAD Architecture 2010 from 2006. Now when I open drawings some of the text disappears?
View 5 Replies View Related