Revit :: 2013 Will Not Open / Triangle Exclamation Error
Oct 23, 2012
I just updated my computer with the latest and greatest parts and was excited to open Revit 2013 and try it out. I installed it last night and tried to open it. The splash screen appears for a second and then closes. On the first try, a yellow triangle with an exclamation popped up, it hasn't happened since. I fixed the registry with MS fix it, uninstalled it, and reinstalled it.
I read that it was not compatible with hyperthreading 8 core CPUs. I don't think this is the issue, because I do not have a 8 core CPU. I have a i7 3.5 Quad Core with Hyperthreading, 16 gigs RAM, 1 gig Graphics Card, and a Solid State Drive.
View 2 Replies
ADVERTISEMENT
Aug 11, 2011
I open files from many different customers in 'vanilla' Autocad 2012, upon exiting I occasionally get an exclamation mark inside of a triangle that appears on the screen by itself after the program closes...No text associated with the close just an exclamation mark inside of a triangle with an 'OK' to dismiss....Does not appear to be file specific, does not happen after any specific input either...Is there perhaps a log I can enable and/or interrogate to see what is causing this warning?
View 0 Replies
View Related
Jun 21, 2012
Exclamation mark with the dimension!
I’m wondering why I got exclamation mark (!) with the dimensions! I wanted to get rid of them but sounds that there is now way to achieve that. I tried to right click the exclamation mark (!) and choose the “reassociate” but with no effect!
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 6 Replies
View Related
Jul 29, 2012
i get the following error msg "an autodesk product failed to send the required value for UPITOKEN. the error report sent to autodesk may be incomplete." and then another one also come "FATAL ERROR: unhandled e06d7363h exception at 75b19617h". then finally close.
View 3 Replies
View Related
Aug 11, 2011
Often when I open a project I ahve been woking on alone I get the following message:
"This file is already open for editing by another user. You will be unable to save any changes before that user closes the file."
Since I am working on the project alone there are no other users who could have the file open. I don't know why I'm getting this message.
View 1 Replies
View Related
Dec 10, 2012
When attempting to start Revit Architecture 2013 I get the error message "The application was unable to start correctly (0xc0000007b). Click OK to close the application".
Revit Architecture 2013 has been installed on my computer since it's release in April and I have installed both updates. Until now it has worked fine and I have had no startup issues.
AutoCAD Architecture 2013 also will not start- same error message.
Oddly, Revit Architecture 2012 will start.
I have tried to uninstall Revit Arch 2013 using windows control panel, but it does not respond.
I have run Microsoft Security Essentials, Microsoft Malacious Software Removal Tool, Malwarebytes, and Super AntiSpyware. So far, the computer looks okay. The only thing questionable was the installation, and immediate uninstall of the iLivid download manager.
View 2 Replies
View Related
Apr 10, 2013
So when I create a triangle by using the star shape tool and only giving it three points. When I have my triangle, I duplicate it and make it smaller. I center them both up on the canvas, but they don't look centered. As you can see in the picture provided, the bottom has more of a width that the others. I've tried using the alignment tool and the smart guides. I do resize the triangle using shift so it doesn't mess up the shape too.
View 10 Replies
View Related
Aug 8, 2012
When I open a file in Inventor 2013 I get the error message "cannot open XML file" for 20 or more files.(See attachment) This has only been an issue since 2013 was installed. What do I need to do to correct this?
View 2 Replies
View Related
Nov 7, 2012
I'm trying to modify a surface I built from drill hole data of a cavern by deleting unwanted triangles from it. Everytime I select the delete lines command it tells me I need to have the triangles displayed for the surface, and they are displayed.
View 3 Replies
View Related
Jun 11, 2013
I am trying to loft a triangle around the path of a helix. I want the top point of the triangle to be facing in such that the ouside surface is flat (in the veritcal direction) for the entire helix and I have the two triangle cross sections oriented to do as much. Whenever I try loft it, autocad associates sides of the triangle that aren't supposed to connect causing the triangle to twist along the path. Is there a way that I can easily tell autocad which sides I want to connect?
View 1 Replies
View Related
Dec 18, 2012
Is it possible that i can save a revit 2013 drawing and open it in revit 2011 file?
View 2 Replies
View Related
Sep 3, 2013
I have 4 points/corners (with XYZ-coordinates) of a square shape created in the DWG of my AutoCAD Civil 3D 2013 program. I want to create 2 "triangle-shape" parcels (one parcel connects Points #1-#2-#3-#1 and the other parcel connects Points #1-#4-#3-#1. How can I create these 2 "triangle-shape" Parcels from the 4 points/corners of a squre shape?
View 9 Replies
View Related
Jan 28, 2014
What does an exclamation mark on files mean?
View 6 Replies
View Related
Jun 6, 2012
Every time I try to choose a color in CMYK it always gives me the exclamation mark with a color that isn't even close to what I'm trying to use. When I click on the color below the exclamation, it still won't give it to me. What is the purpose of this and how can I get it to give me the proper color?
View 2 Replies
View Related
Aug 3, 2013
Changing e-max value introduces an “exclamation mark”,
I wanted to select an emax of 6% but sounds that the horizontal curve is flagged by “exclamation mark” (attached). What might be the issue here?
View 4 Replies
View Related
Mar 11, 2013
I copied my catalog from Windows 7 PC (along with all photos) to a new iMac OXS 10.8. Installed Lightroom 4.3 on the iMac (with photos and catalog in same relative locations as previously in the photos folder)
In the Lightroom library on the iMac, all my photos have an exclamation mark in the top corner, and when opening any of them, I get a comment suggesting metadata is in conflict.The actaul metadata in the photos looks fine.Is there a global command with which I can cancel these exclamation marks?
View 8 Replies
View Related
Feb 25, 2008
I am getting a Could not open due to unexpected end of file error messages on a bunch of jpg's I am receiving via email. The files open in Microsoft Office Picture Manager.
View 2 Replies
View Related
Jun 27, 2012
I am having an issue with an xref in one of my drawings. There are AEC_WALL objects in the xref file but in my drawing they show up as small triangles with an exclamation mark inside.
View 2 Replies
View Related
Apr 1, 2009
I have been re-saving many of my PSD files using CS3 image prosesssor with compatibility mode turned off. They have simply been saved again as PSD files into a different folder - no changes to the original PSD files. This has worked well and reduced file sizes by up to 50% (I had compatibility mode turned on previously).
of the 60 files I have processed, 3 will no longer open , I get a message that says "file will not open due to a program error."
these files have only ever been used in CS3. , they are quite large
from just under 1GB to 1.5GB, however other similar large files have processed successfully. I have re-tried without success.
I still have the original files so no data loss is involved.
View 5 Replies
View Related
May 1, 2012
When designing brochures in X5, we quite often will save a file with no issues, but when we go to re-open it we end up with "encountered an improper arument" error message and the file is no longer able to be opened.
If you try to open the backup it comes up with a "runtime error" and won't open either. We are running Windows 7
View 3 Replies
View Related
May 6, 2013
I'm using Gimp 2.8.4 on a MacBook Pro.
I have been working on an image file for several hours now, and as a result, there were MANY files open (probably over 30).
I attempted to save the file, and recieved the following error message:
"Could not read the contents of [folder name] Too many open files"
I then closed each of the open files except the file I was trying to save, but got the same results.
The same error message pops up when I try to open a file as well.
View 1 Replies
View Related
Oct 2, 2012
I have an assembly that was created on 64 bit version of Inventor 2013, the total file size of everything is around 150MB. Even if I use 'Pack and Go' to move the file to another computer running the 32 bit version I get an error when I try to open it which says something like:
'unable to allocate 3GB memory for FBAttributeSegment'
The actually figure is over 3GB but of course on a 32 bit version of windows it is physically impossible to allocate that amount of memory (even with the /3GB in boot.ini hack)
I've performed various dynamic simulations as well as animations within the assembly so I'm thinking that perhaps its trying to allocate that huge amount of memory for a saved state of one of those.
What FBAtributeSegment might be and whether there is any special way to save an assembly to avoid this problem? The name FBAttributeSegment doesn't correspond to any part or assembly names.
I should also add that I have no problem opening it in a 32 bit version of Fusion which again suggests to me that it is something like simulation or animation that is causing this
View 4 Replies
View Related
Jul 3, 2013
why when i want to import file sketchup by type "IMPORTSKP" in commadline box, i can't import file sketchup into autocad because AutoCad Error Aborting and fatal error, and after that my autocad suddenly closed by it self, so i can't use my auto cad.
View 3 Replies
View Related
Apr 6, 2012
In ACAD 2013, everytime I try to sync my settings to "the cloud", the pull down menu reads "Customization Syn - Error". I am signed in OK to Autodesk 360. Stand alone 64 bit installation on a single machine.
View 2 Replies
View Related
Feb 25, 2013
I could not print, save, make any changes to one particular drawing which was created ion Autocad 2013. Whenever I tried to work on the file attached error message pops up and Autocad program gets closed.
View 7 Replies
View Related
Jan 31, 2013
When I search in content explorer it work just fine but when I click on a drawing to open it acts like its opening but right at the end it says Error Decrypting Data and wont open I've tried to look for a solution and I cant find anything.
View 6 Replies
View Related
Nov 20, 2012
Does Revit DB LInk 2013 is compatible with Access 2013?
View 1 Replies
View Related
Dec 28, 2012
Autocad MEP 2013 was working fine until I installed SP1 yesterday.
Now when type in open the dialog comes up (not a filedia issue). When I click the "look in" pull-down in the open dialog it goes blank and I am unable to browse any folders. I've tried rebooting.. Should I reinstall?
View 1 Replies
View Related
Aug 30, 2012
Now that we have switched most of our users over to 2013, we are receiving this error - only randomly, not on most drawings - but until it is resolved, we cannot batch plot, publish, because it dumps the plot. Here's a clip of the error we're receiving. When I run a Recover, it doesn't resolve the issue.
View 6 Replies
View Related
Jul 6, 2012
I am wondering why RPC content in Revit Architecture 2013 is not exporting, or linking when I open up the project in 3Ds Max Desing 2013. I have tried FBX, and linking that, as well as linking an .RVT file, =either "imported" the RPC objects.
Why doesn't 3Ds Max Design support these objects and is there any way to get them into 3Ds Max.
View 4 Replies
View Related
Aug 16, 2013
I have an auto CAD DWG sent to me with a 2013 FORMAT, and i can't open it with 2010 AutoCAD.
View 2 Replies
View Related
