i got for a project some files (in the pic below) wich i actually can use for an 3D model ( geodate's). Problem is, i dont know how i can use/open them to generate an 3D Model. How to figure out which programm I can use this files or how i can use them in AutoCAD?
View 1 Replies
I have an AutoCAD drawing (I did not create it) of a proposed trail in my city, and I've been tasked with making some kind of model or render of a section of it. I'm at a loss for how to even start, unfortunately. In the end I would like to have an accurate 3D model of a boardwalk section of the trail with surrounding terrain. I have Sketchup, Google Earth, and Revit at my disposal.
My first problem is topography. When I import the CAD drawing to Revit it seems there is some topographical data, which will be needed to realistically build the boardwalk on top of. I was able to get the terrain of the area into Sketchup from Google Earth, but then I don't know exactly where to build the model.
I've attached an image of a floor I created in the outline of the boardwalk. The area in question begins at the two handicap parking stalls (represented as the two blue towers for some hilarious reason) and ends at the second square (a viewing platform). My preferred method would be get an accurate topograhic site in Revit, build the boardwalk, and then place surrounding vegetation so I can get some renders.
EDIT: I've attached "Screenshot 2" which shows I found I was able to create terrain in Revit by selecting a layer of the CAD file. However that layer is suspended above, and my placeholder floor is underneath. Now I just need to get the floor (representing the boardwalk) to go along the terrain.
create a 3D model using a .dxf file?
.dxf file contains 3D contour lines.
when importing it to Autocad 3D 2013 is shown as a colum instead of a 3D model.
I'd like to export AutoCAD file from a model built in 3Ds Max to get some engimeering drawings(as below) But the dwg file export from 3Ds Max is always with the wireframe(as the last one)
View 4 Replies View RelatedI want to plot model and layput in a dwf file in AutoCAD 2013. So is it possible to plot model and layout in a dwf file?
View 3 Replies View RelatedI`ve been trying to create a new drawing template in autocad 2013, I have saved it as a dwt file as suggested . When i go to open the new template the first thing i notice is that the thumb nail has a black ground , while the other templates that came with autocad have a white background !...when i open the dwt file it opens like a normal dwg file in model space not in paper space. the dwt file behaves as just a normal file .
View 5 Replies View Relatedso i recently started taking an architect autocad class. our first project was nothing special but for some reason whenever i save it on my removeable usb after working on it at home, it wont open on the schools computer. it doesnt open as the specific file i wanted, but instead it opens up a blank file named drawing1.dwg. the file name does not even come up at the top of the screen.
View 4 Replies View RelatedI want to create an AutoCAD point clound (.pcg) from a FARO laser scan file (.fls). When I go through the steps in AutoCAD Mechanical 2013, I get the following error (see attached file for screen shot):
Progress.......
Failure! - Fail to open scan file.
Complete, 0 point cloud created, 1 failed.
I've recently been sent an IGS file via a secure file transfer site. Accessed the site, downloaded the file no problem but can't open it in ACad.
I've been advised to use the IMPORT command but this hasn't worked either, just provides me with the pop up saying only V7 & V8 are supported, see screen shot below.
Do I need to purchase a specific piece of software (plug in) to allow me to open the file?
When opening the a .dwg file in autodesk I am prompted with a message telling me that this DWG file was saved by an application that was not developed or licenced by Autodesk. What would you like to do? I say continue opening the drawing. Next the drawing opens but another message appear Proxy Information.
The drawing you have opened or referenced contain custom objects created by an unavailable Object ARX application. You do not need the original application to display proxy representations of objects that were saved in the drawing. However, many manufacturers including Autodesk, provide object enablers that also allow you to edit these custom objects. Visit the AutoCAD Object Enabler assistant web page to locate Autodesk object enablers or contact the software publisher about object enablers for other applications.
I believe the drawing has come from a Pro E environment. The file has been attached.
My adobe Photoshop CS4 extended crashes constantly when I open/import a 3d model/file.
View 6 Replies View RelatedI am a contractor that does work for several different companies. When these companies send me their dwg file I have no problem opening them up to edit them, but once I complete my edits and email the file back to them they are telling me that their autocad crashes while trying to open the drawing or the whole computer itself. Most recently I only made a very minor edit to their dwg which was editing two areas of text and still crashes their computer when I send it back. I am using Autocad lt 2013, while they are using autocad 2010. I backsaved the file as well was purged the drawing after I was finished and still no luck. Also I noticed on another job after doing very minor edits, once I saved the new version the file file sized multiplied like ten thousand times its size.
View 9 Replies View RelatedMy AutoCAD will not allow me to open my recently used file. It keeps coming up with a message saying:
'Drawing File is not Valid'
im new to autocad and what i to know is, is there any way to open a invalid file on autocad?
View 3 Replies View RelatedWhen I zoom in or zoom out the model, normally the dimension will follow the model too.But now in Autocad 2013, even the model size change, the dimension still remain unchange. why? Is there any setting I miss out? URL....
View 2 Replies View RelatedWhen I open a file in Inventor 2013 I get the error message "cannot open XML file" for 20 or more files.(See attachment) This has only been an issue since 2013 was installed. What do I need to do to correct this?
View 2 Replies View RelatedDoes a file on AutoCAD 2014 open on AutoCAD 2010?
View 4 Replies View RelatedWhen I change the column headings e.g. date, tag size etc., on the OPEN FILE box, they revert to the unchanged headings after toe box is closed.
Is there a method of keeping them as I want them ?
I'm using Autocad 2013, and the Open File Dialog Box has disappeared. Every time I try to open a drawing, it defaults to the command line. I have the same error with Image Attach. It's only my user. Other Users on the computer do not have this issue. Settings to change it.
View 5 Replies View RelatedI install AutoCAD LT 2013 when I click install after few minute it show this error message.
The system cannot open the device or file specified. (Please see attached file)
Iused DXFOUT as below to reduce file size. It works well so I want to create a script for that.
Type DXFOUT to export to DXF file.Open the newly created DXF file and run PURGE > ALL, -PURGE > REGAPPS and AUDIT. SaveAs the DXF file back into a DWG file.
The problem is when we use dxfout, it will export to a DXF file but still open DWG file. It means we have to open that DXF file to fix. Cannot use 1 script to do that.
I try this script to save as to dxf, save as will open that DXF automatically and continue with purge, audit but the file size not change.
saveas
dxf
16
-purge
r
n
audit
y
saveas
2007
y
I think the problem is the different between saveas and export.
I am using Autocad2014. I have had issues with two windows7 64bit machines where using the file open dialogue (network file) has an 8 second delay to open the file. If I open using recent documents(in cad) or windows file explorer to open them, there is no delay. Moving the file to the local machine stops the delay, but removing XREF's did not.
View 5 Replies View RelatedI have a Parasolid file that opens in Inventor 2012 but not in Inventor 2013.In 2013 i only have a blank screen.I have zipped the file.
View 1 Replies View RelatedHow do I open an 2014 assembly file to 2013
View 1 Replies View RelatedI had Inventor 2013 and it worked well for a long time, I didn't use it for a while, then yesterday I tried to use it again and it wouldn't work. It starts up fine, and gets to the menu where you can choose from recent files, new files, tutorials, etc. After I select anything to open, whether its a new or old file, the program will load open the file then immediately stop working. No error message is displayed besides Windows telling me "this program has stopped working". I updated to 2014 yesterday, and the exact same problem persists.
View 9 Replies View RelatedWhen I click on File>Open The dialog box no longer has a thumnail preview. Only a small grey box hovering on the right that says "Initial View" with a check box. I have attached a snapshot of my Autocad File> open dialog box so you can see what I'm getting on my end.
If I browse for files in windows explorer and change view option to thumbnail I can see the thumbnails just fine.
I've tried everything but I cannot get back my File> Open thumbnail preview.
In Tools> Options I have the thumbnail preview settings all set to save thumbnail preview image. Nothing has changed that I know if for the thumbnail preview to go away.
It's really slowing me down not being able to have thumbnail preview in the file> open dialog box.
I have a problem with previewing of new files I made in INV2013. Old files are OK. I can not find the cause...I also found, that some new files are correct and other incorrect, all made in INV 2013.
There are two types of error:
1) when I pick the file I want to open, in left lower corner - thumbnail window- is displayed text:"preview not available"
2) when I pick the file I want to open, the left lower corner - thumbnail window- is black
In iProperties panel I have checked "Save preview picture"
I opened electrical by accident and now all my files default to Electrical rather than Mechanical. How can I change this?
I was certain this was easy, right click a file OPEN WITH, etc browse to proper program...
Inventor 2012
Windows 7 64, 6gb RAM, Nvidia 4000
As soon as I click the drop down the screen shows as blank and the program freezes. This happens with all the following commands, Save AS, Insert.
I have checked the FILEDIA and it is set to 1
I seem to have the problem with all autocad products on my Windows 8 pro desktop. I have tried Autocad LT 2013 & 2014.
system info: win8 64bit, autocad 2013 64 bit,
if open autocad program first, every thing is fine , ribboon is working good. but if derictly open a .dwg file when autocad is not running, the ribbon panel is gone, i tried every method i can find -- reinstall, repair install, type "ribbon" command, reset cui, swich to other worksapce then swich back--- but the ribbon just don't come back.
There are four of us in our office who all installed Autodesk Product Design Suite Premium 2013. One of us cannot see thumbnail previews in the file open dialog box or in the preview area of Windows explorer. She's using Windows 7, 64-bit.
View 9 Replies View Related
