AutoCAD Inventor :: 2013 Slow With Saving And Updating?
Aug 8, 2012
I installed IV13 onto four of our workstations including the update 1.
Due to the size and complexity of our project we are using Vault to manage all of our parts and drawings.
We had issues with 2012 but managed to get around them. I was hoping 2013 would solve some of them but we are experiencing extremely slow performance with 2013. It takes at least 15 to 20 minutes to open and update drawings. Swopping between an assembly and IDW to do updates takes another 20 minutes to refresh and update.
This is happening on all four of the workstations.
I have come across a few forums with this same issue and I have tried setting up the options as described in them but have had no difference in performance.
HP Elitebook 8760W
Intel(R) Core(TM) i7-2600QM CPU @ 2HGZ
8GB Ram
Nvidia Quaadro 3000M
View 9 Replies
ADVERTISEMENT
Mar 29, 2012
I find autocad2013 very very slow saving, especialley with larger files. The same files save a lot faster in 2012.
View 9 Replies
View Related
Jul 13, 2012
projected geometry not updating between sketches in inventor 2013. I hope this will be fixed in 2013 sp1. I have noticed it happening alot when I project a line of another sketch that makes a single point in my new sketch. once the original skecth is changed the second one doesnt update sometimes. It doesnt do this 100 percent of the time just when I need to get stuff done.
Dell t1500 i7 8 gb ram
Windows 7 64 bit
ati firepro v4800
View 4 Replies
View Related
Apr 25, 2012
I have noticed that Inventor 2013 is very slow to close out of a file. I just opened an iam that had less than 50 parts. Rotated it to see the other side, then closed it. Took 1min-21 seconds for the swirley circle to go away and I could open my next file.
View 6 Replies
View Related
Jun 13, 2013
inventor 2013- single user
working with an assembly of about 100 parts
file was working fine until about the last large componet i am working on.
when I edit a part and then hit return the ("excuting end edit componet " in lower left hand ) it seems to take some time to compute. This part i have a lot of sketches that are tide to other componets to create the postion of those. so i think this is the reason. i supressed this compent and the file got about 75% better so I am thinking that this is my issue.
for example when i need to make a cut out in one compent that is overlaying another I create a construction projection of the componet and then use this to off set or create a feature from that so that if I change the other one it changes the cut out. I am thinking the computer is having to figure out what is changing everytime.
View 9 Replies
View Related
May 14, 2012
When working in detail drawings inventor progessivly gets slower, the more information on the drawing, the worse it gets.I was watching the task manager, For ANY command, the 1st core runs at 100% for up to 30 seconds, while this is happening, Inventor is dead.
EG, add a revision row, delete a symbol, zoom in or out, pan, add a dimension, move a leader etc.for each command/move takes 10 to 30 seconds to get control, it took me 45 minutes, to add a revision row and print 15 drawings this morning.
View 9 Replies
View Related
May 28, 2013
I have a mech/mfg-necessary pattern set on several parts, to the tune of about 90 slots and 500 holes each. Inventor is absolutely sucking it up handling these parts, and the assembly of these parts together is just a complete nightmare.
I have half-hour load times, constant crashes, and to top it off, they're iparts (used in an iassembly), which means I am constantly having to regenerate the whole part family with every change, a process that can take literally hours.
Are there substitute tricks, or display setting shenanigans I can pull? All of the features are individually needed somewhere, but no mgf machine needs all of them present at once.
View 9 Replies
View Related
Apr 10, 2012
Lightroom LR4 - very slow Keyword set updating 1] keyword an image with some keywords from a keyword set. Those keywords are highlighted in keyword set 2] select next image 3] wait about 4 to 5 seconds for highlighted keywords to be non highlighted.he problem with this, is that yo cannot use the keyword set to apply these keywords to the newly selected image until they are not highlighted any more.
View 4 Replies
View Related
Feb 25, 2013
After updating the file title in a jpeg file, does PSE save the title by recompressing the file using the jpeg compression algorithm or does it simply update the file title without recompressing the file? Prgressive saves of unaltered files suggest that PSE is recompressing the file each time it is saved.
View 9 Replies
View Related
Jan 9, 2014
I have a block that has to be update in a bunch of drawings -more than 20-. I updated in only one drawing, apply coy paste to the following but the block does not update in the drawing that I am pasting my new block. How is possible to update this block in the following 19 drawings?
View 4 Replies
View Related
Apr 10, 2013
do you have a detailed procedure for updating autocad 2013 to 2014?
View 7 Replies
View Related
Nov 7, 2013
Updating the attached dwg (Xref),The file Q1 is attached to the file Q5 (attached). Edits are applied to the Q1. These edits are not transferred to the Q5 despite the fact that the “regenerate” button is pressed.
What might be the issue here? How the edits on the Xref files are reflected directly to where they are attached?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 6 Replies
View Related
Sep 6, 2012
I've made a block with fields linked to attributes (so when I change the value of the "master" attribute, the field values will change).
*NOTE* the fields are contained within a piece of MTEXT and NOT within another attribute.
The fields will not read the "value" of the attributes they are connected to, unless I explode the block (and change the DEFAULT value), or use regular text instead of attributes.
FIELDEVAL - set to 31
UPDATEFIELD - returns: "2 fields found, 2 fields updated" but it doesn't actually update them.
Regen/Regenall/Save - does nothing
BATTMAN - SYNC - does nothing
Lastly, I noticed that if I use "loose" text outside the block, but still link the fields (that are inside the block) to that text, they will update when I change the text contents after regen. AutoCAD is just having trouble using fields+attributes.
View 9 Replies
View Related
Sep 10, 2012
Using project navigator my drawings get xrefed from the constructs, through the views, and finally to the sheets tab.
I recently realized that I needed to fix / change my linetypes on 5 different drawings starting at the construct. When I had finally finished fixing the layer linetype / line LTscale / drawing LTscale to get it to look exactly the way that I wanted, I had to go through my views drawings, and the sheets drawings, detach the xrefs, re-attach them, and then modify the layers to the colours that I wanted.
Some people had the same problem about 10 years ago in this thread, and the poster at the bottom sums it all up nicely. This is not a VISRETAIN issue. I just want changes to my linetype changes to flow through all xrefs, just as if I had moved a line.
[URL]
I would like to see a setting added to CAD that would allow linetype changes to flow through, and a colour setting that would allow colour changes to flow through. Maybe VISRETAIN is too broad of a command, and needs to be broken down into linetypes, colours, LTScales. etc etc etc.
View 4 Replies
View Related
Nov 27, 2012
AI6 is very slow on some saves. Nothing fancy with this file. No gradients, no clipping masks, no placed images, simply color line art. I run a Mac Pro with 16Gb ram and Tb raid drives . I've had this problem with a few other files and I think in CS5.
View 3 Replies
View Related
Jan 8, 2013
After some infrastructure changes, I need to repath all of my xrefs. I know I can easily do this using the Reference Manager, and I have. However, when I open the drawings that I have updated, the xref images (jpg, png, etc) do not display, but rather only show the image border. I must then go into the External References pallette in each drawing and reload each reference. This works fine, but it is awfully clunky, as I must do this for every drawing.
Is there a way I can batch reload these references after updating the path in Reference Manager?
View 3 Replies
View Related
Apr 19, 2013
I'm using Photoshop CS6 . I use the timeline to make my frames and adjust the delay number at the bottom of each thumbnail, i've tried (No Delay, 0.01, 0.1, 02) but once I save they slow down.
When I press play from the timeline it plays fast and smooth. When I click "Save For Web" and press play on the bottom right it plays the same (Although for some reason when the delay is set to No Delay or 0, it plays SUPER fast)
When I click "Preview..." on the bottom right and it opens up in IE it plays very slow even though its delay is set to 0 or the others i've listed above. When I save and open it plays just like when I click preview, slow and delayed. I've tried opening with IE, Firefox, and Chrome and same result.
I even tried saving the frames from my animation and using the Online Generator from [URL]......... and the image can play REALLY fast setting the delay all the way down, heck, I had to set it to around "277 delay" for it to play the way Photoshop saves it thats how slow Photoshop is saving my gifs.
So I know its not a case of the gif having too many frames, or the file being too big.. (Which I don't really see how thats relevant anyways since it should only decrease the image quality not the animation speed)
EDIT: I read somewhere that its because I dont have Quicktime, is this true? I don't want to DL Quicktime if not because I dont need it.
View 3 Replies
View Related
Sep 13, 2013
The company I work for recently updated a few of our computers with the SP2 for Civil 3D 2013. After this update, every time I create a surface profile, things get all messed up. Like I have done dozens of times before, I create the profile then open the profile creation tools. I am using the draw tangents with curves tool and as soon as I click my first tangent point, it shows up about an inch over to the left. I have struggled through and used the grips to edit after the fact but this used to be a VERY easy task. FYI my snap isn't on or anything goofy like that and when opened on a computer without the service pack, it works as it should.
View 7 Replies
View Related
Nov 7, 2012
In the drawings for my company, we will list notes along once side of the page using multiline text as a numbered list. Each number corresponds to a label I then use to mark up my drawings. My label is usually some sort of symbol with a number inside of it. Pretty standard. My problem is, when I want to add a note somewhere in the middle of this list, the numbering changes for everything after the insertion point and I have to go through the drawing and update each label individually. On complicated drawings I want to make sure I don't miss updating a label or see if there is a faster way to update everything. Is there a way to have a label of some sorts with a number that automatically updates to match a certain note so if I add a note in between or delete a note I don't have to change every single note?
View 2 Replies
View Related
Jul 1, 2012
I have recently moved from PS CS5 to CS6 and have noticed what seems to be an increase in the amount of time it takes to save large files. At the moment I am working with a roughly 8GB .psb and to do a save takes about 20 minutes. I have had to disable the new autosave features, otherwise it just takes far too long.
CS5 managed to save larger files, more quickly and with less memory available to it. Looking at system resources while Photoshop is trying to save, it is not using its full allocation of RAM specified in performance preferences and there is still space free on the primary scratch disc. The processor is barely being used and disc activity is minimal (Photoshop might be writing at 4mb/s max, often not at all though according to Windows).
I am finding the new layer filtering system invaluable so would rather not go back to CS5. I can do to speed up the saving process?
View 12 Replies
View Related
Dec 10, 2013
When I save any work I have completed to my desktop or to a server I get a response that my Illsutrator is not responding. Eventually it saves the document but it takes a very long time to do so.I have cleared my cache and mediabrowser.
View 4 Replies
View Related
Nov 23, 2012
Why when I choose a new layer (which happens to have a different colour association) the colour of the new drawn line stays the same?
[URL] .....
I understand there is some setting you type in the command line to solve this problem but I am unable to find what that is.
View 2 Replies
View Related
Aug 15, 2013
Just upgraded a user to Autodesk Building Design Suite Premium 2013 but AutoCad 2013 and AutoCad MEP 2013 are not saving settings.
On first use the crosshair is large and angled, not standard. If I run "Rest values to default" then the settings are standard until I either restart AutoCAD or open a drawing then have the same strange cross hair.
Have tried creating a new profile, setting it as default startup profile by altering the shortcut but no matter what settings are not saved and revert to strange cross hair once AutoCAD is re-opened or a drawing is opening.If logon to computer as a user without a roaming profile all works fine.
View 8 Replies
View Related
Feb 28, 2013
I have a new Mac (2x2.4GHz 6-Core Intel Xeon, 12GB Ram, OS X 10.8.2) and the latest version of Photoshop (13.0.4) installed.Besides the general slower behaviour sometimes, opening and saving files with 80+ layers is unacceptably slow..This is like going back 10 years compared to CS5.5
View 10 Replies
View Related
Jun 17, 2012
Why is Adobe Illustrator CS 6 so slow when I want save a document with many and great images. Very much slower than Freehand.
View 10 Replies
View Related
Oct 29, 2012
I extracted a dynamic feature line from the gutter flowline of my Corridor. I labeled Multiple Segments for the feature line with a grade and vertex style that uses the "General Segment Grade" text component.
I am overiding lane cross slopes in the Section Editior and the segment grade labels for the extracted feature line do not update after I Update Corridor in the Section Editior.
If I raise/lower the CL profile of the corridor, the label updates. Just not reacting to these Corridor edits.
Peculiar behavior: The label will update to reflect the Corridor update if I Isolate it.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
View 4 Replies
View Related
Sep 26, 2012
I am trying to get DText objects to update width factor when I change the Width Factor of the Text Style. We have one style (Simplex) & I hoped to be able to set the width factor of that style to 0.8 or 1.2 depending on what is required and then just insert objects from the tool palette so they have the correct width factor.
This seems to work for MText but not for DText or Attributes. Short of using lisp is there a to update the width factor of DText & Attributes? (hoping to be able to do this on LT also)
Only way I can see for DText is to qselect text and change style to something else and back to Simplex. Only way for attributes I've found is to advance edit block and change text style to something else and back.
AutoCad 2013 & LT 2013
View 6 Replies
View Related
Oct 11, 2012
I using a 27inch iMAC and running boot camp (WIN 7 Pro 64bit). 16GB RAM. Using NAS network storage.Graphic card. but still slow and crash it is the win 7 aero theme will affect the autocad?
View 2 Replies
View Related
Jul 31, 2012
My file has over 100 layers and 20,000 containers that are in 3D. It worked fine when I drew them. After I closed the file, it always takes 5 to 10 min to open. I can't delete a layer (layer2) or rotate angle of view or any normal command such as purge and audit.., it always crashes.
I was wondering that if I did anything wrong casued this, and that whether my approach of drawing these is correct, performace wise.. and what would be the better way of doing this..because my drawing is now uesless I can't even rotate it in vp ro do anything...
View 5 Replies
View Related
Oct 16, 2012
When I work with a drawing that have several XRefs, it is too slow to open, save, or to do everything. I configured:
SAVEFIDELITY=0, XLOADCTL=2, INDEXCTL=3
Is there any other way to improve the performance?
View 1 Replies
View Related
Oct 21, 2013
I have recently installed Autocad 2014 and am experiencing very slow and jumpy files when using x-refs. The other machines in the office where I work are not experiencing the same problem and apparently my machine is more powerful.
Originally we thought this might be a network issue (as x-refs are being referenced through the network) but when I put the actual reference files on my computer, I experienced the same issue.
View 2 Replies
View Related
