When I save any work I have completed to my desktop or to a server I get a response that my Illsutrator is not responding. Eventually it saves the document but it takes a very long time to do so.I have cleared my cache and mediabrowser.
View 4 RepliesI'm working with a 2.73G PSB file that will be printed in a large format printer and eventually end up as a vinyl wrap for a cargo trailer. I've never worked with a Photoshop document this large but from what I've read, PSB's can be up to 4G.
When I open the file, photoshop goes through the trouble of loading the file (the progress bar loads all the way) but when it trys to actually open the document, I get a message from Windows that the program has encountered a problem and has to be closed. At an early stage of working on the document, when the file was less intense with layers and blending modes, the file would open but crash when saving.
The funny thing is that my co-worker runs a MAC with lower specs than mine and the file opens and seems to run stably. I'm thinking it could be a RAM issue but according to CC spec's my machine should work fine?
On my machine, I'm running:
Windows 7 - Service Pack1
Intel Core i5-2400 CPU @ 3.10GHz 1.60
8.00 GB (2.98 GB usable)
32 Bit
I've also read that to access your full RAM's capability you have to be running 64 bit but I'm not sure about this?
Is my illustrator running slow? I have an i7 3770K, 16gb ram, gtx 660i 2g, h100i, ax1200i and maximus formula v. I'm running dual 24" 1920x1080 monitors. File size is 800x600 pixals with 5 layers and 100+ paths in each layer. Is the program running slow because the file is too big or is there a problem with illustrator?
View 7 Replies View RelatedI have recently moved from PS CS5 to CS6 and have noticed what seems to be an increase in the amount of time it takes to save large files. At the moment I am working with a roughly 8GB .psb and to do a save takes about 20 minutes. I have had to disable the new autosave features, otherwise it just takes far too long.
CS5 managed to save larger files, more quickly and with less memory available to it. Looking at system resources while Photoshop is trying to save, it is not using its full allocation of RAM specified in performance preferences and there is still space free on the primary scratch disc. The processor is barely being used and disc activity is minimal (Photoshop might be writing at 4mb/s max, often not at all though according to Windows).
I am finding the new layer filtering system invaluable so would rather not go back to CS5. I can do to speed up the saving process?
I have a new Mac (2x2.4GHz 6-Core Intel Xeon, 12GB Ram, OS X 10.8.2) and the latest version of Photoshop (13.0.4) installed.Besides the general slower behaviour sometimes, opening and saving files with 80+ layers is unacceptably slow..This is like going back 10 years compared to CS5.5
View 10 Replies View RelatedI find autocad2013 very very slow saving, especialley with larger files. The same files save a lot faster in 2012.
View 9 Replies View RelatedAI6 is very slow on some saves. Nothing fancy with this file. No gradients, no clipping masks, no placed images, simply color line art. I run a Mac Pro with 16Gb ram and Tb raid drives . I've had this problem with a few other files and I think in CS5.
View 3 Replies View RelatedI am using corel X6 64 on a Dell optiplex 9010 intel(R) Core(TM) i7-3770 @ 3.40GHz 3.40 GHz. 8.00GB of RAM. Its taking about 1-2 minutes to copy/cut/open a file/save a file or even publish to PDF. On the same machine Same circumstances but different User i have no problem. I have to use my user because its connected to my email and at this company i cant change that. I have researched many forums and its not color styles or object styles. It does it on a new file with only one object created. I got a new computer signed on to my user account and the problem persists.
View 14 Replies View RelatedWhy is Adobe Illustrator CS 6 so slow when I want save a document with many and great images. Very much slower than Freehand.
View 10 Replies View RelatedI created a action in Illustrator CS6 (on a PC) which opens PNG files, scales them onto a 8.5 x 11 page, saves them as a PDF into a output folder on my desktop and then closes the page. The action works great and does exactly what I had hoped for.
Here is my issue: I now have a need to do this on multiple files at the same time. Using the Illustrator Help menu, I found out about Batch processing. The tutorial says that a batch can be run on a single file or on a folder of files. Bingo! That's what I want. Problem is, I can't get it to work.
After setting up the batch with the following settings: (note: I didn't use a destination folder because I have the action saving the pdf into an output folder on the desktop).
According to the help page, it said to use Override Action "Open" commands which Opens the files from the specified folder and ignores any Open commands recorded as part of the original action. I thought this is what I needed to open all the files in the folder, because when recording my action, I had to use the open command to open a png file. It wouldn't just let me choose a folder. If I don't have the open command in the action, nothing happens.
My main issue is getting multiple files from within my input folder to open when running the action. The only file that opens is the file that I recorded while creating the action. If I remove that file from the folder, nothing happens at all.
I have a pretty beastly pc and photoshop is the only app that is very sluggish when loading or processingDo scratch disks play an important part?
Specs:
I7 920 CPU
Radeon HD 6800 video card
24gig DDR3
320gb SSD (C:)
4x 1tb HDD
Could you peeps offer any suggestions on what this problem could be with my pc? In the last few days my system as really slowed down to the point of stopping. I have 1gb ram and 140gb hd, p4 and top graphics card. i`m running norton av to check. If anybody thinks they know what the prob could be please do get in touch.
View 9 Replies View RelatedI recently upgraded my Mac Pro 1,1 with the following:
CPU Upgrade to 2 x 2.66GHz Quad Core
RAM Upgrade to 14GB
GFX Upgrade to ATI Radeon HD 5770 1024mb VRAM
Everything seems fine. My temperatures are normal and things are seemingly speedy.My problem is that Photoshop CS6 seems to run a little slow. I'm only working on web files (72dpi) that are yes, sometimes quite long in length (5000px high), but that has never been an issue.
Some problems I've noticed:When I click to edit text, it may take 2 seconds before I can start editing itWhen I scroll upwards it chugs a littleIf I grab an object/shape and drag it around too quick, it might lag a little
Same system... CS6 runs perfectly fine, close it, then load CC, not even workable. Close CC and reload CS6 and it runs fine...
Is CC really that much more hardware dependent? I feel like the issue is software related and has nothing to do with my machine... My Machine isn't some kind of powerhouse, but it does have 8gb of ram, and again, no real issues with CS6...
I have compiled a gif animation in ImageReady, but even with the delay set as 0sec, the output runs slow. When I preview the animation in the program, it runs fast, but as soon as I saved it, it becomes slow again.
View 8 Replies View RelatedMy PS one day outa the blue just started to lag im thinking of reinstalling but before I do that, I have a question. setting up PS for your puter to have PS run smoother or just not lag.......talking about PS7
View 5 Replies View RelatedIs this happening with anyone else? I am running Bridge and it is WAAAAY slow, sometimes 15 seconds to bring up an image from the film strip view. Tagged a couple with a green tag and it's taking forever. Nothing like cs2 that runs great.
Also, right after I installed CS3, I found "mDNSResponder.exe" on my hard drive.
I have a new laptop (Intel i7) and having issues running Map 3D. There is a delay after every command.
View 1 Replies View RelatedSystem Information:
Win 7 Pro 64-bit
AutoCAD Map 3D 2011 x64
Hardware:
Core i5- 650
8GB Ram
NVIDEA FX 580
Our company purchased two brand new computers and upgraded to Map 3d 2011 and it has resulted in major time lag and running slow issues. We use a 15mb city map as are main drawing file and in AutoCad Map 2004 it runs smoothly. After the upgrade thing are running very poorly. Selecting and deleting files that could be done in seconds in 2004 now can takes a 1/2 hour. The program also seems to get stuck periodical on a selected item , requiring restart. We have upgraded all the drivers and I have tried several different display drivers. I have saved the map as a 2011 file and I have repaired it. I have tried upgrading to Map 2012 but the problems persist.
I installed Photoshop Extended CS4 64bit. I opened a 24mb PSD file, there is some text with some outer glow when I move it I get redraw. CS4 just feels sluggish compared to CS3. My system is not that bad, e6600, 4GB, 8800GTS 640, Vista Home Premium x64.
I have updated to the latest drivers for my GPU. I am considering just a reformat and install.
I am trying to work out a plan in Autocad and it goes so slowly. The slowest of all actions I do is always drawing a simple line. No other program is running on my laptop.
View 9 Replies View RelatedPeriodically I am having problems selecting text! I will select my text tool and go to edit text and the type tool changes back to the selection tool. I have to fiddle around an click on different layers then go back to the type tool and then it will start working. I am not the only person in my company who switched to CS6 and is experiencing issues with this new program running slow. Switing from layer folders also causes thing to freeze up. I am running off a Mac Book pro with OS Lion 10.7.4. I uploaded CS6 just over a week ago.I only used the CS5.5 trial version so there should not be a conflicting problem with a CS6 trial version.
View 1 Replies View RelatedCorelDraw X4 seems to run slow on my new system.
I used X3 on a very low grade business computer at my last job and it worked flawlessly, now I have a stacked HP system with X4 and it runs doggie. I notice it most when cropping bitmaps with the node edit tool. I will get an hour glass (blue ring) when I do this.
I have my memory allocation at 75%
Have recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
My company has upgraded to AutoCAD 2012 on VDE but CAD seems to be running a bit slow/sluggish. Is there any settings I should tweak in order to improve performance?
View 0 Replies View RelatedI'm a contractor, I've created a really impressive form-driven assembly containing various iLogic rules. However, as i add more rules it is beginning to slow down (increase rule processing time). Should I suggest upgrading to 64-bit and increasing RAM?..could be costly with no increase in performance.
Processor: i7-2600
OS: 32-bit
RAM: 4.00GB
Inventor 2012
In Videostudio X4 pro - can I insert a NORMAL slow vertical ticker (without any stupid effects) inside my running Video. I try this now for hours, but it is impossible.
View 14 Replies View Relatedim currently using Autocad 2013 and it is running painfully slow when drawing lines and copying lines and objects... my experience on autocad is very minimal and how to speed things up a bit. also icons appear next to lines when i join 2 or more line, one for each join, but i suspect they may also be causing my drawing to lag.
View 4 Replies View RelatedFor some reason when I scrub through my animation, it runs really slow. And it has nothing to do with my computer itself. It is the particular file. I tested this by opening up one of my others (i saved in iterations) and they all scrub just fine. All I was doing was animating with a rig, so there isnt any extra polygons or whatever. And on top of that, it worked just fine before I exited the program earlier, I even playblasted it and everything, and then I looked at the playblast later and decided I wanted to change something, reopened the file, and the timeline has been chugging ever since. I tried opening and closing maya already.
View 1 Replies View RelatedI am working on six very similar map documents. They all are moderately complex with layering, drop shadows, and some placed raster files. I have linked rather than embedded the big tif raster files.
The confusing thing is that some of the illustrator files save in 2 seconds, and some of the files save in 2 minutes.I have compared all the settings, and I don't see what I'm doing different on the ones that take a long time to save. All big placed files are linked, not embedded.
The only clue showing a difference is that the files that are taking a long time to save are about 200mb in size. The files that are saving quickly are about 1mb in size.
One of our employees logs in remotely to a local PC running Revit via terminal services so that all work is done on the local network. The employee is acting through screenshots. All worked well using 2009 Revit or Architecture on XP machines. However, we added new faster Windows 7 machines with 2012 products. The PCs are all 64 bit with 16g RAM and a 22mb internet connection.
View 3 Replies View Related