In Videostudio X4 pro - can I insert a NORMAL slow vertical ticker (without any stupid effects) inside my running Video. I try this now for hours, but it is impossible.
View 14 RepliesI want to add a realtime clock to my video ... following the timeline clock. Can I do this with VideoStudio? How?
View 14 Replies View RelatedI'm using Adobe Premiere pro and I am doing a video for my work. I am trying to place a ticker on the bottom of the video that will be scrolling as the video plays but I can only do a small amount at a time. Is there a way to do one continous ticker that will play instead of having to type one part and then a seperate one and trying to match the same speed so they don't overlap?
View 8 Replies View RelatedWith CVSproX4 i can't to do a low sliding titles (news). i want that one rotates from right to left of the video. The available effects of the software doesn't forecast this simple effect.Or not?
View 3 Replies View RelatedUsing Videostudio Pro X5. Captured video using GoPro at 240fps. Video imports fine. I want to edit the video in slow motion. I'm using the "speed/time lapse" option - I set the speed at "25%".
However the outcome is that the video is choppy as if it's throwing away frames. At this setting I should be getting decent smooth frame rates but this is not the case. I'm looking to end up with at least 25-30 fps.
I have problem with .avi files. I can insert .avi video to library. That is not the problem, but when I want to insert it to the timeline, that show me error message, where is written: "The content of this file is unreadable." It's video from Google Earth recorded by Fraps.
View 5 Replies View RelatedI'm a professional musician trying to create material for my website and YouTube. I recently shot video with two cameras at an event. I need to learn
1) how to insert the second video track,
2) how to line it up to the exact time of the first video track, and 3) how to pan back and fourth between tracks to create a short film.
I have VSP x3. I can't figure out how to format a title to scroll across the bottom of the screen sort of like a stock ticker....
View 1 Replies View RelatedI'm using VS 11. Is there a way to insert gaps between clips on the main video track? I can do this when I move the clips to the overlay track, but I need the overlay track for actual overlays, so I don't want to do that for this project. I need gaps so I can put in narrative text between each clip.
Alternatively, is there a way to have multiple overlay tracks?
I have a pretty beastly pc and photoshop is the only app that is very sluggish when loading or processingDo scratch disks play an important part?
Specs:
I7 920 CPU
Radeon HD 6800 video card
24gig DDR3
320gb SSD (C:)
4x 1tb HDD
Could you peeps offer any suggestions on what this problem could be with my pc? In the last few days my system as really slowed down to the point of stopping. I have 1gb ram and 140gb hd, p4 and top graphics card. i`m running norton av to check. If anybody thinks they know what the prob could be please do get in touch.
View 9 Replies View RelatedI recently upgraded my Mac Pro 1,1 with the following:
CPU Upgrade to 2 x 2.66GHz Quad Core
RAM Upgrade to 14GB
GFX Upgrade to ATI Radeon HD 5770 1024mb VRAM
Everything seems fine. My temperatures are normal and things are seemingly speedy.My problem is that Photoshop CS6 seems to run a little slow. I'm only working on web files (72dpi) that are yes, sometimes quite long in length (5000px high), but that has never been an issue.
Some problems I've noticed:When I click to edit text, it may take 2 seconds before I can start editing itWhen I scroll upwards it chugs a littleIf I grab an object/shape and drag it around too quick, it might lag a little
Same system... CS6 runs perfectly fine, close it, then load CC, not even workable. Close CC and reload CS6 and it runs fine...
Is CC really that much more hardware dependent? I feel like the issue is software related and has nothing to do with my machine... My Machine isn't some kind of powerhouse, but it does have 8gb of ram, and again, no real issues with CS6...
I have compiled a gif animation in ImageReady, but even with the delay set as 0sec, the output runs slow. When I preview the animation in the program, it runs fast, but as soon as I saved it, it becomes slow again.
View 8 Replies View RelatedMy PS one day outa the blue just started to lag im thinking of reinstalling but before I do that, I have a question. setting up PS for your puter to have PS run smoother or just not lag.......talking about PS7
View 5 Replies View RelatedIs this happening with anyone else? I am running Bridge and it is WAAAAY slow, sometimes 15 seconds to bring up an image from the film strip view. Tagged a couple with a green tag and it's taking forever. Nothing like cs2 that runs great.
Also, right after I installed CS3, I found "mDNSResponder.exe" on my hard drive.
I have a new laptop (Intel i7) and having issues running Map 3D. There is a delay after every command.
View 1 Replies View RelatedSystem Information:
Win 7 Pro 64-bit
AutoCAD Map 3D 2011 x64
Hardware:
Core i5- 650
8GB Ram
NVIDEA FX 580
Our company purchased two brand new computers and upgraded to Map 3d 2011 and it has resulted in major time lag and running slow issues. We use a 15mb city map as are main drawing file and in AutoCad Map 2004 it runs smoothly. After the upgrade thing are running very poorly. Selecting and deleting files that could be done in seconds in 2004 now can takes a 1/2 hour. The program also seems to get stuck periodical on a selected item , requiring restart. We have upgraded all the drivers and I have tried several different display drivers. I have saved the map as a 2011 file and I have repaired it. I have tried upgrading to Map 2012 but the problems persist.
I installed Photoshop Extended CS4 64bit. I opened a 24mb PSD file, there is some text with some outer glow when I move it I get redraw. CS4 just feels sluggish compared to CS3. My system is not that bad, e6600, 4GB, 8800GTS 640, Vista Home Premium x64.
I have updated to the latest drivers for my GPU. I am considering just a reformat and install.
I am trying to work out a plan in Autocad and it goes so slowly. The slowest of all actions I do is always drawing a simple line. No other program is running on my laptop.
View 9 Replies View RelatedWhen I save any work I have completed to my desktop or to a server I get a response that my Illsutrator is not responding. Eventually it saves the document but it takes a very long time to do so.I have cleared my cache and mediabrowser.
View 4 Replies View RelatedPeriodically I am having problems selecting text! I will select my text tool and go to edit text and the type tool changes back to the selection tool. I have to fiddle around an click on different layers then go back to the type tool and then it will start working. I am not the only person in my company who switched to CS6 and is experiencing issues with this new program running slow. Switing from layer folders also causes thing to freeze up. I am running off a Mac Book pro with OS Lion 10.7.4. I uploaded CS6 just over a week ago.I only used the CS5.5 trial version so there should not be a conflicting problem with a CS6 trial version.
View 1 Replies View RelatedCorelDraw X4 seems to run slow on my new system.
I used X3 on a very low grade business computer at my last job and it worked flawlessly, now I have a stacked HP system with X4 and it runs doggie. I notice it most when cropping bitmaps with the node edit tool. I will get an hour glass (blue ring) when I do this.
I have my memory allocation at 75%
Is my illustrator running slow? I have an i7 3770K, 16gb ram, gtx 660i 2g, h100i, ax1200i and maximus formula v. I'm running dual 24" 1920x1080 monitors. File size is 800x600 pixals with 5 layers and 100+ paths in each layer. Is the program running slow because the file is too big or is there a problem with illustrator?
View 7 Replies View RelatedI'm working with a 2.73G PSB file that will be printed in a large format printer and eventually end up as a vinyl wrap for a cargo trailer. I've never worked with a Photoshop document this large but from what I've read, PSB's can be up to 4G.
When I open the file, photoshop goes through the trouble of loading the file (the progress bar loads all the way) but when it trys to actually open the document, I get a message from Windows that the program has encountered a problem and has to be closed. At an early stage of working on the document, when the file was less intense with layers and blending modes, the file would open but crash when saving.
The funny thing is that my co-worker runs a MAC with lower specs than mine and the file opens and seems to run stably. I'm thinking it could be a RAM issue but according to CC spec's my machine should work fine?
On my machine, I'm running:
Windows 7 - Service Pack1
Intel Core i5-2400 CPU @ 3.10GHz 1.60
8.00 GB (2.98 GB usable)
32 Bit
I've also read that to access your full RAM's capability you have to be running 64 bit but I'm not sure about this?
Have recently upgraded to corel 11, from 9, but at the same time upgraded my computer.
When I try to plot a simple circle shape on my Roland CM24 the image cuts twice and is extremely slow (juddering).
I believe the double cut is caused by the hairline & fill but messing around have only gone from double cutting each shape individually to do double cutting the whole image.
My company has upgraded to AutoCAD 2012 on VDE but CAD seems to be running a bit slow/sluggish. Is there any settings I should tweak in order to improve performance?
View 0 Replies View RelatedI'm a contractor, I've created a really impressive form-driven assembly containing various iLogic rules. However, as i add more rules it is beginning to slow down (increase rule processing time). Should I suggest upgrading to 64-bit and increasing RAM?..could be costly with no increase in performance.
Processor: i7-2600
OS: 32-bit
RAM: 4.00GB
Inventor 2012
im currently using Autocad 2013 and it is running painfully slow when drawing lines and copying lines and objects... my experience on autocad is very minimal and how to speed things up a bit. also icons appear next to lines when i join 2 or more line, one for each join, but i suspect they may also be causing my drawing to lag.
View 4 Replies View RelatedFor some reason when I scrub through my animation, it runs really slow. And it has nothing to do with my computer itself. It is the particular file. I tested this by opening up one of my others (i saved in iterations) and they all scrub just fine. All I was doing was animating with a rig, so there isnt any extra polygons or whatever. And on top of that, it worked just fine before I exited the program earlier, I even playblasted it and everything, and then I looked at the playblast later and decided I wanted to change something, reopened the file, and the timeline has been chugging ever since. I tried opening and closing maya already.
View 1 Replies View RelatedOne of our employees logs in remotely to a local PC running Revit via terminal services so that all work is done on the local network. The employee is acting through screenshots. All worked well using 2009 Revit or Architecture on XP machines. However, we added new faster Windows 7 machines with 2012 products. The PCs are all 64 bit with 16g RAM and a 22mb internet connection.
View 3 Replies View Related