Over the break management has decided to change the way our files are named and pathed.
This has messed everything up with the ex-refs in CAD. Is there a way to change that saved paths for the ex-refs and reload, or do I have to start from scratch?
I have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View RelatedAfter some infrastructure changes, I need to repath all of my xrefs. I know I can easily do this using the Reference Manager, and I have. However, when I open the drawings that I have updated, the xref images (jpg, png, etc) do not display, but rather only show the image border. I must then go into the External References pallette in each drawing and reload each reference. This works fine, but it is awfully clunky, as I must do this for every drawing.
Is there a way I can batch reload these references after updating the path in Reference Manager?
I realized many people need code in a txt file so I have attached two from my previous posts.
Both are having the same problem where the code runs to completion but does not update the xrefs. I am still guessing there is some xref edit that I am missing other than database.xrefeditenabled
What is the best method to re-path x-refs in a project whose folder has been moved. We are talking about 60-100 x-refs here.The originals were created in ACA 2009 and were not pathed relatively; nor was Project Navigator used. We are currently using ACA 2014.
View 1 Replies View RelatedI have set up a master set of dwg. files we use to create our construction documents. The files consist of a master file that xrefs base files. All of our files are named using the project # first. (i.e. 2011001c.dwg). I have set up the master set using x's to replace the numbers.
Here is how it works:
XXXXXXXc.dwg (master file) relative path xref's the following files.
XXXXXXXlw.dwg
XXXXXXXvlw.dwg
XXXXXXXeg
XXXXXXXfg
XXXXXXXtitleblock
note: all of these files are saved in the same folder.
I am trying to find a way to keep the xref paths working when I copy the files to a project folder and rename the files using the actual job # insead of the x's as place holders. As it is now, when I change the drawing name the reference is lost and I have to manually change all of the xref paths in the xref manager. Is there a command, program, or lisp routine than can change the file names and update the paths automatically.
I need to change colour to a drawing with several viewports and xrefs. I suggested to my co-worker that I could fix this via plot manager, but he insists that I change all colours in the xref to one and the same, so everyone can plot it black and white and so we don't have to set up new plot styles on every computer. (we've got the drawing file from another company btw).
I've had a look and it seems like I have to do refedit to be able to edit any parts of the xref. Most of the drawing has got the same colour already, but it just say "by layer"... how do I find out what colour it is?
i have a large number of drawings that need xrefs detached and re-attached with the latest model xrefs, any way to do them in bulk rather than opening each individual drawing? the problem started a while back, when opening drawings, ACAD is not loading the latest 'saved' model when opening drawings...
View 5 Replies View RelatedI have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedIs there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies View RelatedI am trying to change my Xrefs from full pathing to relative pathing. If the file i am trying to xref is located at the following location
\hfg.intdepartmentsProduction"6 HA"1 StructuralFabrication EngineeringDrawing OfficePrevious ProjectsA11001
What do i put for the file path for it to be relative pathed?
I have a drawing which has a reference to an external drawing in it for the company logo which is used in the title block. We have moved the location of the company logo to a new drive and thus I need to modify the properties of the path.
But when I open up the properties on this it does not allow me to change the path. I found the only way around this was to delete it and start over using the new path .
Is it possible to change the saved xref path without reattaching the xref.
View 1 Replies View RelatedHave existing hotel site plan project folder and I copied it to new location and renamed folder and file names I have a grading plan that has spot elevations from data shortcut referenced surface. Is there a way to reference the new revised surface, that has same name and have the elevations update with the new surface and then delete the original referenced surface.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
What exactly is this tool used for if you cant change the source file name or the path? and why would the interface let me poke into these fields and give me the option to find and replace if they cnnot be edited
So how can I change the Source File name and path?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
I have a lot of drawings that someone inserted the Xref's, but the Xref's are "Attached, and Full Path"; however, I need to change them to "Overlay, and Relative Path".
View 3 Replies View RelatedI'd like to start using the auto-publish feature in Autocad, however the options for the file location are pretty limited. I'd like to set it to something like the following:
../transmittals/current issue/
but the options I'm presented with is either an absolute location, or the drawing folder or subfolder.
Is there a sysvar or a registry setting I can tweak to make this behave to my liking?
"Path has discontinuous segments. Use Edit Sketch to change the path geometry"
View 5 Replies View RelatedHow i can change, path type of xref file from fullpath to no path
View 1 Replies View RelatedIs there a way to change the default setting for the Array path command?
When I use the arraypath command I:
1st - Select Object
2nd - Select path curve
3rd - Type in "I" for Item to change to my desire spacing.
i have this drawing which i created data reference to the wrong project in the wrong coordinate system and worked off that. then now i am trying to correct it. so i copied the dtm and did coordinate transformation and got that right. now the model drawing is still linked to the original dtm from the other project folder.
if i remember right back in 2007 version there was a completely built in shortcut editor which allows you to change the path in current drawing. now it's all greyed out. there is no access. so is there a way to bypass this? probably pretty common thing to do. say you want to try different version of the same object to try your design just swap it back and forth.
They should make a right click button on the data shorts in current drawing and says "browse data reference" not show up when only broken reference occurs.
one way i can think off now is copy the files to local. disable network drive, then let it broken reference show up then browse to desktop one then delete desktop one and hopefully it get the broken reference again and not look for the very original one. i think it's probably gonna do that, there is some "hidden" thing stored in the object to point to the original path which not available to users.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I need to update both the path and the Source file name in Data Shortcuts editor. If I update the path, it looks in the new path for the old file name, and throws an error. If I update the File name, it looks in the old path for the new file name, and throws the same error.
View 6 Replies View RelatedIt appears when dragging a path segment, in PSCS6, the direction lines change direction. Interesting change. How do I regain the legacy functionality?
View 1 Replies View Relatedhow to make text go from left to right within a circular Workpath that I have created. I realise that it is possible to move it with the direct selection tool, but why is it so hard to make it go from left to right inside the circle?
View 1 Replies View RelatedHow. Do I change to a new folder, keeping my sub folders the same so that I can still upload. I am changing the user "my pictures" is under?
View 2 Replies View RelatedYes, I have CS2 for Illustrator, I got it through college.Anyways, I was working on vectors and was drawing strokes and being able to see the guide line (I suppose that's what you call it) in the middle of the stroke path.BUT, I must've selected something wrong, because I can't see the line.I restarted PC even, rebooted AI, and still can't see it.I used the Pen to draw some lines, but I don't see the blue line that is shown when you drag and change the curve of the path.I opened up a new window/file and when I drew the path of the Pen tool, I was able to see it again? Was it just a problem w/the file itself?
View 1 Replies View RelatedUsing the new LR4.
So since I updated to Light room 4 – I changed the name of the volume that all the pix were on. So the library has been upgraded (from LT3) but all the folders have the big “?” on them because the name of the original volume where the pix were stores is no longer there. I don’t want to go through every folder to locate the new location of the pictures (which actually is the same volume but the name changed) of that volume. How can I easily locate all the pictures for the library on the newly named volume? Without going through folder after folder and on and on to correct the path.
Is there a way to change the colour of the path/shape lines? the grey is confusing, i want a bright colour!
View 1 Replies View RelatedI'm using gimp 2.8.2 on debian wheezy and have a little problem, which can be reproduced like this:
File -> New (image size 640x400)Ellipse selection tool 60/60 500x280select -> to path
select -> none
Pencil tool settings:
mode: normal
opacity: 100.0
Brush: 2. Block 01
Size: 80
aspect ratio: 20
angle: -45
Edit -> Stroke Path (stroke with a paint tool -> Pencil)
At the top and bottom of the ellipse the outline is discontinued.
With View -> Zoom: 800% the stepsize for the applied pencil can be counted. I count a gap of 8 pixels, but I found no way to configure the stepsize.I'd like to have the pencil applied each pixel along the path.
The nodes on my path tool seem awfully big. They get in the way of seeing what i'm editing. I've noticed on some tutorials the nodes are quite small. Is there a way to change their size?
View 1 Replies View RelatedIts a simple problem. I hope I'm missing some easy option, but no matter how I change the options in the brush dialogue, the brush always has the same orientation to the origin path. See the image below:
The brush is rather large and complex, but I've never seen this happen before. No matter which of the direction buttons are pressed, the brush remains the same. Is there another way to change the orientation with respect to the path?