Lightroom :: Volume Name Change Breaks Path?
Apr 6, 2012
Using the new LR4.
So since I updated to Light room 4 – I changed the name of the volume that all the pix were on. So the library has been upgraded (from LT3) but all the folders have the big “?” on them because the name of the original volume where the pix were stores is no longer there. I don’t want to go through every folder to locate the new location of the pictures (which actually is the same volume but the name changed) of that volume. How can I easily locate all the pictures for the library on the newly named volume? Without going through folder after folder and on and on to correct the path.
View 2 Replies
ADVERTISEMENT
May 26, 2012
With all that adobe has done with this version, but not only that has changed. Lets say that im drawing a path with the pen tool and I get it wrong putting the last segnment and press Ctrl+Z to Undo, the path breaks and you have to go back and click on the last point again to keep drawing.....
Another thing that im experimenting is that the intuos3 in illustrator 6 the selection even with the double click on the side of the pencil is getting stuck for a brief moment when i stop pressing the pen in the tablet surface.
View 12 Replies
View Related
Mar 21, 2013
I'm on a mac and I'm trying to run the photoshop script "Layer Comps to Files" - which works fine .... UNLESS I'm connected to an SMB network drive with "users" in the path.
NOTE: I am not trying to save to the network drive!
NOTE: Each test I'm doing is exactly the same (other than which network drive is connected)
NOTE: Just having the network drive connected with "Users" in the path messes things up!
eg.
Script does NOT run if I have an SMB drive connected with "Users" in the path, e.g.: [URL]...As soon as I disconnect the SMB drive (I don't even have to close photoshop) the script runs perfectly fine.The script also runs FINE with other SMB network drives withOUT "users" in the path, e.g.:[URL]...
I found this thread from 2010 (which has never been resolved but is inconveniently read-only now) has the same issue with CS4 and it still isn't fixed in CS6:[URL]...
View 2 Replies
View Related
Feb 22, 2012
Got a bit of a puzzle here, trying to animate a cylinder deforming along a path. Fairly standard stuff. Got the path deform fine, but now I need any of the vertices that enter this one area to be deleted. Volume select with a mesh object doesn't seem to work, as it will only select the vertices where the cylinder is before the path deform object. Is there any sort of work around/way to collapse the animation of the path deform? I know I could do snapshot if I only wanted one frame of it, but the cylinder moves along the path over 1500 frames.
View 3 Replies
View Related
Jul 11, 2012
I have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies
View Related
Aug 31, 2012
Is there a way to change an xref from saved "full path" to "relative path"?
View 1 Replies
View Related
Jul 25, 2013
trying to install my old photo shop 7.0 in windows 8 it installs fine but when trying to open the program it says scratch disks are full. I know 7.0 is old but its paid for and I cant afford to upgrade now 7.0 does everything I need it to. During installation I got a message saying windows and Adobe scratch files were in the same volume. I dont know how to change the volume.
View 2 Replies
View Related
Jun 12, 2012
I have a project with many clips. I am trying to change the volume on all of them to the same level. I tried shift click on the first clip and then the same on the last one to group them all. They group but I can't change the volume for all of it. Do I have to change volume separately on each clip?
If so, is there an easier way other than dragging the little markers up and down when I'm on the volume timeline?
View 2 Replies
View Related
Jul 10, 2012
using the sub-object SET VOLUME function to change the shape of the lattice (down to the positions of the individual points) does not affect where the object deforms. The only way to alter the lattice is to go sub-object LATTICE and move the whole lattice prior to deformation.
View 8 Replies
View Related
Dec 16, 2013
I want to adjust the level of the sound within a clip. I take my pen tool and just add 2 keyframes a few seconds apart from eachother. I adjust the height of the last keyframe, but when I playback NOTHING happends. This is so annoying because it has always worked. I use Premiere Pro 5.5.
View 11 Replies
View Related
Oct 2, 2012
Is there a way to generate a volume report for a bounded volume surface?
View 3 Replies
View Related
Sep 20, 2011
I know this is an easy one, but how do you change audio levels (volume) inside a song track, including length of fade in and fade out?
View 2 Replies
View Related
Aug 19, 2012
I recently change the volume of a part thinking that it would change the actually size of it. It didn't effect the size at all and now I don't know what the actual volume of the part is anymore. How do I find out the part's actual volume?
View 3 Replies
View Related
Jun 18, 2012
I'm working with TIN surfaces, doing cut/fill comparisons for a surface mine.
My volume surface statistics show a cut volume of 5167.22 cy and fill volume of 8456.18 cy.
The sample line group volume report show cumulative cut of 5527.67 cy and fill of 8465.56 cy.
What could be some causes of this disparity. All reference surfaces are built from points and use a non-destructive boundary.
View 2 Replies
View Related
May 31, 2013
I've read a few threads on this way back but cannot locate them. I have two surfaces and create a volume surface and it reported the volume as 493 cy. I then ran some sample lines at 25 foot interval and the total volume is reported as 964 cy.
View 1 Replies
View Related
Apr 24, 2013
I want to use it as my primary hydrologic and hydraulic modeler. It only makes sense. Well, I got the program to work and had things linked in and was able to route a storm through the network. But when I routed the storms, I had to model double the storage that i expected.
So I went back to the program I'm familiar with - Pondpack by Benltey - and designed the same system I routed in SSA in that program - and got the storage volume that I would expect for a site of this size - about 2 acres.
Is there possibly a setting that I'm missing that makes my outlet structures route slower or less than they should? Or is there some other reason that a system would give this kind of inflated need for storage?
View 9 Replies
View Related
Feb 25, 2013
I have an issue with using Bounded Volume or Adding a Boundary to Volume Surface things so bad... = incorrect volumes.. sometimes extremely incorrect.. I understand that the surface rectangle when a boundary is added but this could be horrible if not checked.
View 3 Replies
View Related
Feb 4, 2014
I'm no longer able to control the PP (monitor) volume using my computer volume controls. I've always controlled the monitor volume using my computer volume levels, but starting today, that has changed.
The volume is just playing at the level recorded with no way for me to turn down or up.I performed a disc repair and that didn't solve the problem.
View 1 Replies
View Related
Nov 1, 2011
I've just started using LR 3.5, I've used a 30 day trial and read lots of tutorials before installing so I have a fair idea of how it works.
My problem is that I have several thousand images on DVD. I've started to import them into LR but once the DVD is taken out LR does not remember the volume name of the DVD, so if I am looking for a picture I am unable to see which DVD is it on, just that it is on my D:/ drive.
I have not had this problem when using an old version of Photoshop Elements or a free cataloging software that I have used.So, is there a way to tell LR to record the volume name without using a work around such as adding keywords when importing?
View 3 Replies
View Related
Jan 8, 2013
Thier external hard drive is showing up twice in the Folder panel. Two volume headers are displayed, but again there's only one drive. At first glance it looked as though they were dupicate lists. But, upon further clicking, we found that they are not the same. One header shows 9 folders less and 2000 images less. One shows some LR modifications of the images, but the other header doesn't of the same images. All new imports go header #2, though all previous imports are in both headers. There are missing images in one header, but they are not missing in the other.
Using the comand Show in Finder shows of course the same folder (again there's only one drive). Trying to move a folder or image from one volume header to the other gives an expected error of "there's already and item of that name..." Syncronizing the same folder in each volume header gives different results (we aborted of course).
It's almost as if there are two catalogs running simulatiously. Each showing something different for the same volume.
Oh, I was just informed that this occured just after an upgrade from LR 3.6 to LR 4.3. Mac OS 10.7.
View 1 Replies
View Related
Jan 5, 2012
Over the break management has decided to change the way our files are named and pathed.
This has messed everything up with the ex-refs in CAD. Is there a way to change that saved paths for the ex-refs and reload, or do I have to start from scratch?
View 2 Replies
View Related
Oct 8, 2011
I have a drawing which has a reference to an external drawing in it for the company logo which is used in the title block. We have moved the location of the company logo to a new drive and thus I need to modify the properties of the path.
But when I open up the properties on this it does not allow me to change the path. I found the only way around this was to delete it and start over using the new path .
View 6 Replies
View Related
Jan 20, 2009
In most other application, MSWord, Dreamweaver, Indesign... [shift] + [enter] creates a Line Break (forced, manual).
In Photoshop however, it does nothing.
This is mostly only an issue when you are justifying text.
When you want to move the last word or so in a line down to the start of the next line but still have the block of text 'Justified' ... in photoshop it is troublesome.
(^n = line break, for demonstration purposes, photoshop does not display hidden characters that i know of, and in indesign at least, a forced line break is represented by a small sideways, backwards L.)
View 1 Replies
View Related
Sep 12, 2012
It appears when dragging a path segment, in PSCS6, the direction lines change direction. Interesting change. How do I regain the legacy functionality?
View 1 Replies
View Related
Mar 8, 2009
how to make text go from left to right within a circular Workpath that I have created. I realise that it is possible to move it with the direct selection tool, but why is it so hard to make it go from left to right inside the circle?
View 1 Replies
View Related
Feb 7, 2013
How. Do I change to a new folder, keeping my sub folders the same so that I can still upload. I am changing the user "my pictures" is under?
View 2 Replies
View Related
Jun 2, 2012
Yes, I have CS2 for Illustrator, I got it through college.Anyways, I was working on vectors and was drawing strokes and being able to see the guide line (I suppose that's what you call it) in the middle of the stroke path.BUT, I must've selected something wrong, because I can't see the line.I restarted PC even, rebooted AI, and still can't see it.I used the Pen to draw some lines, but I don't see the blue line that is shown when you drag and change the curve of the path.I opened up a new window/file and when I drew the path of the Pen tool, I was able to see it again? Was it just a problem w/the file itself?
View 1 Replies
View Related
May 29, 2005
After I slice a layout im workin on, (links, main content), the layout breaks up and looks like puzzle pieces that need to go back where they were.
View 4 Replies
View Related
Aug 29, 2012
Is it possible to change the saved xref path without reattaching the xref.
View 1 Replies
View Related
Apr 25, 2012
Have existing hotel site plan project folder and I copied it to new location and renamed folder and file names I have a grading plan that has spot elevations from data shortcut referenced surface. Is there a way to reference the new revised surface, that has same name and have the elevations update with the new surface and then delete the original referenced surface.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
View 2 Replies
View Related
Aug 15, 2007
Is there a way to change the colour of the path/shape lines? the grey is confusing, i want a bright colour!
View 1 Replies
View Related
