Photoshop :: Pen Tool Path Continuity Breaks After Undo (CS6)?
May 26, 2012
With all that adobe has done with this version, but not only that has changed. Lets say that im drawing a path with the pen tool and I get it wrong putting the last segnment and press Ctrl+Z to Undo, the path breaks and you have to go back and click on the last point again to keep drawing.....
Another thing that im experimenting is that the intuos3 in illustrator 6 the selection even with the double click on the side of the pencil is getting stuck for a brief moment when i stop pressing the pen in the tablet surface.
View 12 Replies
ADVERTISEMENT
Mar 21, 2013
I'm on a mac and I'm trying to run the photoshop script "Layer Comps to Files" - which works fine .... UNLESS I'm connected to an SMB network drive with "users" in the path.
NOTE: I am not trying to save to the network drive!
NOTE: Each test I'm doing is exactly the same (other than which network drive is connected)
NOTE: Just having the network drive connected with "Users" in the path messes things up!
eg.
Script does NOT run if I have an SMB drive connected with "Users" in the path, e.g.: [URL]...As soon as I disconnect the SMB drive (I don't even have to close photoshop) the script runs perfectly fine.The script also runs FINE with other SMB network drives withOUT "users" in the path, e.g.:[URL]...
I found this thread from 2010 (which has never been resolved but is inconveniently read-only now) has the same issue with CS4 and it still isn't fixed in CS6:[URL]...
View 2 Replies
View Related
Apr 6, 2012
Using the new LR4.
So since I updated to Light room 4 – I changed the name of the volume that all the pix were on. So the library has been upgraded (from LT3) but all the folders have the big “?” on them because the name of the original volume where the pix were stores is no longer there. I don’t want to go through every folder to locate the new location of the pictures (which actually is the same volume but the name changed) of that volume. How can I easily locate all the pictures for the library on the newly named volume? Without going through folder after folder and on and on to correct the path.
View 2 Replies
View Related
Feb 13, 2014
I created text on a curved path using the pen tool and the the type on a path tool. However, there are portions of the text that I want to taper. For example, my text begins horizontally, continues to the right, and gradually curves downward. As the text curves downward I would like it to taper smoothly into a narrower and narrower text.
View 1 Replies
View Related
Jul 30, 2007
when i hit the del key the magnetic tool wont undo.
View 9 Replies
View Related
Jun 22, 2006
let's say you are rendering a huge picture with polygonal tool, but then make a small mistake on accident fromt one point to another. is there anyway to go back to the previos point before clicking.
View 4 Replies
View Related
Aug 19, 2012
I think it'd be so cool to be able to replay your entire undo history of a picture, so you can see and show others how you proceeded on a picture you made. That way, it's never necessary to capture screen video for like 10 hours and stuff..
So first you'd need to add an option to save the undo history (so that you always keep the history from when you started). Then you'd need an option to playback the undo history.
View 3 Replies
View Related
Apr 27, 2012
Is there a way to undo without zoom as part of the undo?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
View 4 Replies
View Related
Oct 20, 2011
I have a problem understanding how undo marks are added to the undo stack.In the code below a fan of lines are draw in a random location.If you run MTest a few times, the AutoCAD Undo command will remove the fans one at a time.
If you run MMulti to draw 10 fans, the AutoCAD Undo command will remove all the fans in a single step.I want to be able to remove the fans one at a time.I thought that a StartTransaction / Commit pair would act as markers for the undo stack, but this isn't working.
Tested on AutoCAD 2010 VS 2008
<CommandMethod("MMult")> _
Sub testmult()
Dim i As Integer
For i = 1 To 10
Call testdraw()
Next
End Sub
[code]....
View 3 Replies
View Related
Mar 28, 2013
How come the width tool can ne used on a path made by pen tool but not brush strokes? Is a brush stroke not a path??
View 4 Replies
View Related
Sep 15, 2005
I've had a problem with the pen tool for a while now...
On the odd occasion when I am creating a new path, it inverts itself, i.e. when I select it I get the opposite of what I have masked, (also the Path icon background will switch from grey to white indicating the path has reversed).
I've had this problem in version 7/CS1 and CS2, my normal fix is to ditch the prefs and I get the tool back the way it should be but this is proving a pain.
I thought it could be a keyboard shortcut that I was hitting by mistake but I can't seem to find any reference to a short cut for this. (Searched online and Ninness book Power Shortcuts.)
View 1 Replies
View Related
Dec 5, 2002
Every time I path something and then try to mark and fill in any kind color I get a blur around the marked area.
I have the swedish Photoshop and donno what the name of it, but maybe I can explain:
in the marked area you can choose in the meny, so that you get a kind of fuzz around the marked are, when you fill it up you get a blur around the marked area. Its this Im trying to explain, I get this fuzzu marked area around when Im trying to fill in the color on the path that I have selected and marked.
View 2 Replies
View Related
Oct 12, 2004
I have been reading about the Pen Tool and according to what I am reading (off various websites) here is what I am supposed to do...
1. Open a new workspace
2. Click the Pen Tool
3. Make a path using 4 or so anchor points
4. Select the Brush tool
5. Click on the Paths tab (on the right where the layers are)
6. Double-click on the path to save it.
7. Then right-click on the path and choose STROKE PATH.
The only problem is that my STROKE PATH is DISABLED.
View 7 Replies
View Related
Nov 24, 2012
I'm a beginner at photoshop and I'm only 14 years old. I need to know this for my GCSE project.
I'm trying to create something similar to this:
Using pen tool and stroke path, but when i use the pen tool I'm not sure how to add the stroke path like that.
I've used CS4 previously at school and when you right clicked on the path it came up with this:
I haven't a clue how to get that up on CS6 (on mac) and when you right click it, it just seems to continue adding the path.
View 2 Replies
View Related
Feb 27, 2013
In the past I have traced the outline of an image using the pen tool by placing as many points along the contour or outline as possible. Once I closed the path the appearance was not perfectly smooth.
I remember using a tool after that to smooth the path that would eliminate any uneven or jagged edges and make the curves really smooth. How to do this in CS6?
View 6 Replies
View Related
Oct 11, 2012
I am working with the pen tool on a gray background and it is very painful to clearly see the pen tool lines...... What is a simple way to work around these problem?
View 4 Replies
View Related
Mar 21, 2012
Although I think the pen tool could be an excellent way of making selections, I find that in many situations the path color hardly shows against a midtone or gray area I want to select.
Furthermore I find the tangent line makes things worse since it's the same color as the path (gray) and can easily obscure the selection I attempt to make.
Is it really not possible to change the path color when using the pen tool?
View 6 Replies
View Related
Sep 28, 2004
when I create stiching look, such as this ---------, I've created a line and ereased the middle part.
But is there any way I can create a path and somehow manupilate the pen/pencil to create the stitch?
I already know the "spacing" function on the brushes palette. This doesent really create "-". It's more of ".".
View 5 Replies
View Related
Jul 13, 2005
It's probably very easy, but I still can't figure it out. When I use the path-tool (Photoshop CS2), I keep getting a filled spline. But I'd rather just have an empty one instead, maybe even with a different brush? Is this possible without switching to Illustrator?
View 4 Replies
View Related
Nov 26, 2012
drawing a circle path with one point and dragging or something like this.
View 2 Replies
View Related
Mar 6, 2012
I created a path with the type tool, selected the path in the Paths panel, I started typing on the path and the type followed the path, though I chose edit > free transform path and scaled it, though the text did not move with the new path and now it is no longer on the path?
1. Why did the text not stay on the path as I transformed it?
2. How do you hide the path so you do not have to see it? I want it there only as a guide for my text to flow across.
View 1 Replies
View Related
May 14, 2013
I've recently upgraded to Photoshop CS5.1 and I've encountered that the pen tool will only let me fill in one path at a time. Older versions of Photoshop would fill in all the paths at the same time so I don't see why the pen tool would be capable of doing that in a newer version.
View 1 Replies
View Related
Jun 3, 2012
I want to change my Path Selection tool options but every time I select the Path Selection tool in the tool bar, Photoshop CS6 crashes. I would like to select the Constrain Path Dragging option which I believe is in the options bar?
View 8 Replies
View Related
Jan 20, 2009
In most other application, MSWord, Dreamweaver, Indesign... [shift] + [enter] creates a Line Break (forced, manual).
In Photoshop however, it does nothing.
This is mostly only an issue when you are justifying text.
When you want to move the last word or so in a line down to the start of the next line but still have the block of text 'Justified' ... in photoshop it is troublesome.
(^n = line break, for demonstration purposes, photoshop does not display hidden characters that i know of, and in indesign at least, a forced line break is represented by a small sideways, backwards L.)
View 1 Replies
View Related
Jun 12, 2012
Prior to Photoshop CS6, a curve on a path could be moved using the Direct Selection Tool without altering the path beyond the two enclosing points. If you manipulated the curve, only the inside handles of the two points (that create the curve) would change - and only in length - as shown below:
Unfortunately, in Photoshop CS6, if you manipulate the path curve with the Direct Selection Tool, the handles both sides of the points move freely - affecting the path beyond those points:
- is there a way to revert to the prior behaviour? The Photoshop CS6 behaviour may seem more intuitive (or something), but it's less precise and alter parts of the path that are fine already.
View 2 Replies
View Related
Oct 16, 2013
How to make the selection using the 'Path Select Tool' to auto fit the image edge to edge. The reason is that I have 9 images that have to be exactly the same size with slightly rounded corners for a website header, one for each country. Is there any way to auto fit?
View 5 Replies
View Related
Apr 18, 2009
i cant resize my pen tool path and fill shape at the same time, it just changes the size of the path and leaves the fill separate and unchanged.
View 4 Replies
View Related
May 29, 2005
After I slice a layout im workin on, (links, main content), the layout breaks up and looks like puzzle pieces that need to go back where they were.
View 4 Replies
View Related
Jan 3, 2013
For the move tool you can choose to disable auto selection, auto select a group, or auto select a layer. By default though the path selection tool autoselects a layer. How can I disable autoselection?
View 1 Replies
View Related
May 29, 2012
For some reason I can't select the "stroke path" option with the pen tool in photoshop to add tapers to my pen tool strokes. I can only get dead lines. why is this not working?
View 4 Replies
View Related
May 2, 2012
CS6 Pen tool, clicking and dragging on an existing path should not change the angle on the adjacent radius handles. It should only dynamically adjust the length of the existing radius handles, based on which direction you drag. It should only affect that one segment and not affect the bordering angles. I've been pathing with Adobe products for 25 years and this should not change now. I want to be able to fine tune ONE line segment without affecting its neighboring segments. The "new" behavior should only occur with a modifier. If the Mothership deems this is the only way to do this moving forward, at LEAST give your long-standing customers a modifier, such as the shift key to enable us to keep working as we have been for decades.
View 6 Replies
View Related
