I have autocad running on my partitioned mac and I have just created a multileader style with Datum triangle filled as the arrowhead symbol. In the view panel the symbol looks correct, but when I select the multileader with this datum style and add it to my drawing it appears as an unfilled triangle!
View 2 Replies
In the properties and quick properties dialog box the drop down box that shows diffrient arrowhead types to choose from have disappeared, and is blank.
View 4 Replies View RelatedI have an annotation family with about ten different types built into it. When I import this into a project, the Arrowhead option (in the Type Properties) of each type is set to 'none'. I do not see anywhere in the family editor to set that value to 20 Degrees Filled. Is there a way to accomplish this, or must I set the arrowhead values each time I load a tag (which seems absurd and redundant).
View 4 Replies View RelatedAutocad2010 there is a blue triangle preceding layer name in property box on some layers as shown on attached image. Sometimes these layers are turned on when viewing paperspace, sometimes they do not show up.
View 3 Replies View RelatedThis is for CS4. I want to apply two arrowheads of different sizes to one end and the other end of a line. This is not possible with CS4 under "Add Arrowhead" where the size of the arrowhead (Scale) applies to both the Start and End arrowheads.Illustrator allows to apply several instances of an effect to an object. So I apply one instance of "Add Arrowheads" for the Start end with a given arrowhead Scale (size of arrowhead), and another instance of "Add Arrowheads" for the other End with a different Scale. The second "Add Arrowheads" instance of the effect does not behave at all as expected (it adds two "disfigured" arrowheads even though I ask for one arrowhead only).How can I use two working instances of "Add Arrowheads" to reach my goal?
View 5 Replies View RelatedI want to edit the default arrowhead. I know how to create custom-arrows, etc. but I want the versitility of having arrow heads on many layers, not the zero layer or any other layer that the arrow block-definition is on; and I do not want to use the pointed arrow.
Where may I edit the arrow, or substitute my own; and in what format is it in?
What is the easiest way to correct contour lines when they don't display correct? Adding points, deleting points, switching edges...
See everything circled in orange on attached pdf.
I have a utilities file with existing water and FM as shown in picture 1. But when I reference it into my sheet, the text becomes very tiny. Is there a setting for paper space I should change? The dash is correct, just the letters get small, so changing the ltscale in the original drawing blows up the dash also so that won't work.
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
I am running a corridor in Civil 3D 2012 that has two baselines. Issues with multiple baselines in section views, but understand this problem was eliminated in 2012? In any case, this does not seem to by my issue. Attached you will find a section view through the two baselines (one is for a general overlay, the second for widening). The section view seems to display correctly at station 3+75, but 25' feet further down the road it does not display the corridor assemblies correctly (as can be seen by the lack of a ditch and shoulder overlay in the second image).
I have checked the code styles to make sure all links are included, as well as the comparing section view properties. All settings and styles appear to be the same, and the corridor seems to be built correctly. If I sample the Finished Grade corridor surface, it displays in section view as if the ditch were there (see third image).
Civil 3D 2010 & 2012
HP Z400 Workstation
Intel(R) Xeon(R) CPU W3550 @ 3.07 GHz
6GB of RAM
64-bit OS
NVIDIA Quadro 2000 running driver version 8.17.12.7105
Win 7 Professional
We've just started using ACA 2012 and have noticed when importing files created in ACA 2009 that structural members do not display properly. We use the structural column or beam to represent a rainwater or soil pipe and are expecting to see a cut through at the cut plane and nothing else however we are getting a couple of lines that represent the crank in the pipe and I cannot turn them off. I'm sure that a setting has been introduced somewhere however after two weeks of looking I am still in the dark.
I've attached a file created in ACA 2009 that displays the problem in ACA 2012
I am running ACA 2011 X64.I have some leaders that I copied from one drawing into another drawing.
When copied the leaders do not display their attributes. I cannot seem to figure out how to do it. I have made sure they are both in the same annotative scale and that both have the current scales loaded.
We are currently using 2012 Civil 3D, and we have a issue with a drawing that not all the Pipes from the pipe network are displaying in the Profile, and even the pipe properties display box the lengths show up way too long and the stationing does not display correctly in this pipe properties box either.
The Big Twist is that we have 2 machines in the offices that will display the drawing correctly, in profile view and pipe properties display box has correct lengths and stationing. So we know it is not styles, etc.
Direct support has suggested we un-install all Autodesk products and reinstall them all again, we tried the repair, however this did not work. Any other way before we have to go through all this work, as we are looking a huge amount of downtime, and we do not think this is the issue. Perhaps a Civil 3D variable or Autocad variable is different?
Having a problem when uploading a file with multiple artboards where a few boards will drop elements from the page or will be cut-off on the bottom. The artboards are the correct size in the file and all elements display properly when saving. Resaving, and reuploading will fix some issues, but cause new ones - it's really random.
View 4 Replies View RelatedA week ago all was well in Premiere Pro CS6 world. One day I updated Windows, next day all but a few .mp4 video files opened in Premiere Pro, played fine as well, EXCEPT for the fact that the display now has green (sometimes multicolour, sometimes a solid green block) bars in the lower third of the screen. See screenshot below.
These same files open/display fine in After Effects, Photoshop and VLC- and Quicktime players. I'd read something fromyears ago about Windows Updates causing this, so removed one of therecent KB's to no avail. I did install AdobeMediaEncoderTrial_64-6.0.3-mul-AdobeUpdate and DynamicLinkMediaServerRetail-1.0.1-mul-AdobeUpdate and reverted to Quicktime 7.6 but nothing makes a difference.
In the end, I formatted C:, reinstalled Windows 7 Ultimate 64bit, downloaded/installed about 260 updates and reinstalled CS6 (and then the aforementioned AME and DLMS updates and QT7.6) but it's STILL the same problem.
Also tried exporting (part of) one of these files, just to see if it wasn't just a display problem: the exported file with the same properties as the original also has the green bars.
I am having a problem with Photoshop CS5 Extended V 12.1.
The problem:
When I open some files, some shades of BLUE colour is displayed as BLACK However the same file opens and displays correctly if I open it using Photoshop Elements V9.0.3.When I save the file as JPEG and re-open it, the problem returns.Opening the JPEG file in any other application, including PS Elements, does not cause the problem
Source of files The original files came from a Nikon camera, saved in RAW format. It is possible that the original files were corrupted in some way as the shots had an unusual blue cast - which was easily resolved by Photoshop when I originally opened the RAW files.problem is not universal as I've not been able to reproduce it with any other files (RAW or JPEG).
I have calibrated my monitor display settings sRGB IEC61966-2.1 (default)
Other information:
Adobe Photoshop Version: 12.1
Operating System: Windows 7 64-bitVersion: 6.1 Service Pack 1
System architecture: Intel CPU
[code]....
I just installed CS4 on a lovely new Dell notebook with WUXGA display (1920x1200) and am having a problem that I have never seen before. When the brush tip is small (up to 35 px at 100%)Â I see the entire circle defining it, but as I move into larger and larger tip sizes the circle starts to disappear from the bottom right, becoming just a smaller and smaller circular fragment until it disappears entirely at around 300 px. If I select the center crosshair, this also disappears around 200px (when only a small circular crescent is left), and then reappears at around 400px (minus any trace of the circle). It is obviously some sort of display issue: if I change the image size the behavior is the same when the circle is the same size onscreen, so it is the display size and not the absolute pixel size which determines it. This happens whether I choose normal or full-size tip. Has anyone experienced this? It is not only annoying, it is positively serious, since at certain sizes I cannot even tell where or how large the brush is. Clear type on or off makes no difference. I have not noticed any odd display behavior with any other program.
View 5 Replies View RelatedI have a multi-story model with "Existing" and "New Construction" phases present on each level. The graphic overrides are functioning properly on the 1st Floor (existing is displayed in lighter line weight and half-tone) but for some reason the overrides are not applying to the 2nd Floor.
View 1 Replies View RelatedRevit 2013. I Set up a color scheme for rooms. colors are fine but the colors go to middle of walls (interior and exterior) even tho walls are set to room bounding. Room and area calcs set to wall finish but in plan view and in sheet view the colors go to wall centers. Plotting the colors override/cover wall graphics. Created a quick "dummy" project using masonry walls and it worked fine.
Also, if you link a revit file with additional rooms how do you add those to color schedule? Cant jus add room in host file - says its not properly enclosed. putting room in the linked file doesn't seem to allow room to be read/scheduled/displayed by name/number-just shows the room X with a + sign in middle. Adding color to linked file gets nothing but I want it controled in host anyway.
Alright, so I'm running Windows 7 64-bit and Illustrator CS5.
Times New Roman Regular does not display correctly on my machine when using Illustrator CS5, but Bold, Italic, Italic Bold display just fine. Times New Roman does display correctly in every other program I use. InDesign, Word, etc. I've attached a screenshot to show what I mean.
When I open a text box and type all of the fonts are all basically the same. They donot display correctly. I uninstalled and re-installed photoshop elements 11 and they still do not work.
View 3 Replies View RelatedI have a eps figure that was generated in MATLAB. One of the axes should contain a "Delta" (triangle) symbol. The symbol appears if I allow Preview (OS X) to convert the esp file to pdf. However, when I open the file with Illustrator, I loose the "Delta" symbol (It gets replaces with a box). I need to edit the eps file with Illustrator, but I also need to retain the "Delta" symbol.
View 19 Replies View RelatedI am finding that when using Photoshop cs6 on a mac and when saving files as png or web files - the options panel displays as black and you are unable to see any of the options.
View 11 Replies View RelatedWhen I open JPEGS or RAW images in photoshop they have a dull, flat color to them. This is happening after recently buying a NEW PA271W wide-gamut display and calibrating it using Spectraview 2. It doesn't matter whether I have the Working Space in PS set to Adobe RGB or sRGB under color settings... The only way I can make my image look normal is to go under settings and ASSIGN PROFILE to Adobe RGB. It looks fine then. I could live with that, except the bigger problem is that I begin my editing process in RAW, where the colors are also looking flat. The best I can tell, there is no way to assign a profile at this stage...
I've been working in photoshop many years and I do know that RAW images have a 'flatter' appearance to being with, but this is something completely different. For example, when I slide photoshop onto my other monitor next to it (I have multiple monitors) - the color reverts to the normal color I want . And if I then slide photoshop back onto my new NEC monitor, the normal color actually stays intact for about two seconds, then reverts back to the dull color. So I am unable to begin my work process in RAW since the colors are wrong. Also, I know that my new monitor is capbable of displaying my images in their proper colors because when I use any of several different image viewers I have - irfanview, etc. - everything is fine. It's only in photoshop.
Three pdf's attached. I can't get the glass in the glass sidelight to display in the project plan view, and a threshold-like thing is shown in the project plan view that shouldn't be there. The frame (jambs, sidelight sill and head, and door frame head) and glass sidelight were assembled in the family editor using extrusions.
View 2 Replies View RelatedWhen I use select object, it never displays the marquee correctly. One of two things will happen.
It will
1. Not even display the marquee at all e.g. I use select object by rectangular selection and the rectangle marquee box is invisible (although I can still select things)
or
2. If the marquee does display it shows it behind the objects, instead of in front of them, as scene in the image below.
I tried to make an animation of complex (comlicated) artwork - I thought it would be Ok by converting each part to symbol, group them - make keyframes and bring Illustrator to make me inbetweens by blending objects. Overall it works, but it has some problems - sometimes it reflect the blended symbol (vertically and horizontally), but sometimes not (so I do not know, what is the problem). Sometimes it change color of feathered black object (every, not only in blended instance) but again - sometimes not. I use CS5 - is it better in CS6? I tried some default symbols (to find out, if it is problem of my symbols) but it is not reliable too.
View 10 Replies View RelatedPhotoshop CS6 incorrectly displays Layer Styles when zoomed out. Different zooms display Layer Styles differently.I've noticed this issue since PS's document display engine was changed along with the addition on enhanced GPU support, but it never really hampered my work, until today.so, notice the lowercase "c" has some odd light colored shapes inside of it. These are there because I've applied a Bevel. Just how it should be be.
-This is 100% zoom:
-Now 50% zoom: (notice the difference)
-Now 25% zoom: (big difference)
I was actually working 25% carefully tweaking my little candy letters to get 'em lookin' all nice and shiny. Got to a happy point but then zoomed in. I was dismayed to see the extra bevel I'd applied look like garbage (refer to 100% zoom pic, above).
this project is huge - 28x36in 300DPI poster. Zooming in and out constantly sucks. I don't use Layer Styles that often but when I do I'd like to know that PS isn't lying to me when I'm zoomed out.
I recently upgraded to Snow Leopard and Creative Suite CS5, Adobe Illustrator CS 15.1.0. I'm using Suitcase Fusion 4 ver. 15.0.5 (latest version). I'm having a problem with 2 of my fonts loading correctly in illustrator's Character pallet. They display like a missing fonts in the character pallet as shown in my screen shot with "less than" characters around them: < Carta >, , < ITC Zapf Dingbats > These fonts and files do not give me warnings for missing fonts. The files print and rip correctly. The font displays correctly in illustrator when I use them in a layout (as shown on pic). They also display correctly and are fine in all other applications: Quark, InDesign, Photoshop etc. My fonts are setup correctly, pared down system fonts, other user folders emtpy etc. I have font nuked with Suitcase, Font Nuke and did a safe start up to clear font caches. several times. I've also removed these fonts from suitcase and loaded them in my system folder to see if that fixed it. These fonts are used 1,000's of pages/files so replacing them with another verion isn't really an option.
View 1 Replies View RelatedI have the text style set to match text orientation to layout and it works, but when I use the same text style in mulitleader the text doesn't rotate with the layout 2013 Civil 3D
View 9 Replies View RelatedI have some new multi leader definitions using blocks, however I can only edit the attribute definition text individually, where if I had the same block as a standalone with a leader I could select as many blocks as I wanted and change the text via quick properties in one quick step. Is there a way to achieve this using a block as a base for a multileader?
View 2 Replies View RelatedIs there a way to set the Multileader scale for DIMSCALE when it is on the tool palette like you are able to do with every other block? Maybe a lisp routine so set the Multileader style and to dimscale?
View 4 Replies View Related
