Photoshop :: Image Not Displaying Correctly CS5 Extended V 12.1?
Apr 11, 2013
I am having a problem with Photoshop CS5 Extended V 12.1.
The problem:
When I open some files, some shades of BLUE colour is displayed as BLACK However the same file opens and displays correctly if I open it using Photoshop Elements V9.0.3.When I save the file as JPEG and re-open it, the problem returns.Opening the JPEG file in any other application, including PS Elements, does not cause the problem
Source of files The original files came from a Nikon camera, saved in RAW format. It is possible that the original files were corrupted in some way as the shots had an unusual blue cast - which was easily resolved by Photoshop when I originally opened the RAW files.problem is not universal as I've not been able to reproduce it with any other files (RAW or JPEG).
I have calibrated my monitor display settings sRGB IEC61966-2.1 (default)
Other information:
Adobe Photoshop Version: 12.1
Operating System: Windows 7 64-bitVersion: 6.1 Service Pack 1
System architecture: Intel CPU
I just installed CS4 on a lovely new Dell notebook with WUXGA display (1920x1200) and am having a problem that I have never seen before. When the brush tip is small (up to 35 px at 100%)Â I see the entire circle defining it, but as I move into larger and larger tip sizes the circle starts to disappear from the bottom right, becoming just a smaller and smaller circular fragment until it disappears entirely at around 300 px. If I select the center crosshair, this also disappears around 200px (when only a small circular crescent is left), and then reappears at around 400px (minus any trace of the circle). It is obviously some sort of display issue: if I change the image size the behavior is the same when the circle is the same size onscreen, so it is the display size and not the absolute pixel size which determines it. This happens whether I choose normal or full-size tip. Has anyone experienced this? It is not only annoying, it is positively serious, since at certain sizes I cannot even tell where or how large the brush is. Clear type on or off makes no difference. I have not noticed any odd display behavior with any other program.
When I open a text box and type all of the fonts are all basically the same. They donot display correctly. I uninstalled and re-installed photoshop elements 11 and they still do not work.
I am finding that when using Photoshop cs6 on a mac and when saving files as png or web files - the options panel displays as black and you are unable to see any of the options.
When I open JPEGS or RAW images in photoshop they have a dull, flat color to them. This is happening after recently buying a NEW PA271W wide-gamut display and calibrating it using Spectraview 2. It doesn't matter whether I have the Working Space in PS set to Adobe RGB or sRGB under color settings... The only way I can make my image look normal is to go under settings and ASSIGN PROFILE to Adobe RGB. It looks fine then. I could live with that, except the bigger problem is that I begin my editing process in RAW, where the colors are also looking flat. The best I can tell, there is no way to assign a profile at this stage...
I've been working in photoshop many years and I do know that RAW images have a 'flatter' appearance to being with, but this is something completely different. For example, when I slide photoshop onto my other monitor next to it (I have multiple monitors) - the color reverts to the normal color I want . And if I then slide photoshop back onto my new NEC monitor, the normal color actually stays intact for about two seconds, then reverts back to the dull color. So I am unable to begin my work process in RAW since the colors are wrong. Also, I know that my new monitor is capbable of displaying my images in their proper colors because when I use any of several different image viewers I have - irfanview, etc. - everything is fine. It's only in photoshop.
Photoshop CS6 incorrectly displays Layer Styles when zoomed out. Different zooms display Layer Styles differently.I've noticed this issue since PS's document display engine was changed along with the addition on enhanced GPU support, but it never really hampered my work, until today.so, notice the lowercase "c" has some odd light colored shapes inside of it. These are there because I've applied a Bevel. Just how it should be be.
-This is 100% zoom: -Now 50% zoom: (notice the difference) -Now 25% zoom: (big difference)
I was actually working 25% carefully tweaking my little candy letters to get 'em lookin' all nice and shiny. Got to a happy point but then zoomed in. I was dismayed to see the extra bevel I'd applied look like garbage (refer to 100% zoom pic, above).
this project is huge - 28x36in 300DPI poster. Zooming in and out constantly sucks. I don't use Layer Styles that often but when I do I'd like to know that PS isn't lying to me when I'm zoomed out.
Having a problem when uploading a file with multiple artboards where a few boards will drop elements from the page or will be cut-off on the bottom. The artboards are the correct size in the file and all elements display properly when saving. Resaving, and reuploading will fix some issues, but cause new ones - it's really random.
A week ago all was well in Premiere Pro CS6 world. One day I updated Windows, next day all but a few .mp4 video files opened in Premiere Pro, played fine as well, EXCEPT for the fact that the display now has green (sometimes multicolour, sometimes a solid green block) bars in the lower third of the screen. See screenshot below.
These same files open/display fine in After Effects, Photoshop and VLC- and Quicktime players. I'd read something fromyears ago about Windows Updates causing this, so removed one of therecent KB's to no avail. I did install AdobeMediaEncoderTrial_64-6.0.3-mul-AdobeUpdate and DynamicLinkMediaServerRetail-1.0.1-mul-AdobeUpdate and reverted to Quicktime 7.6 but nothing makes a difference.
In the end, I formatted C:, reinstalled Windows 7 Ultimate 64bit, downloaded/installed about 260 updates and reinstalled CS6 (and then the aforementioned AME and DLMS updates and QT7.6) but it's STILL the same problem.
Also tried exporting (part of) one of these files, just to see if it wasn't just a display problem: the exported file with the same properties as the original also has the green bars.
I have a multi-story model with "Existing" and "New Construction" phases present on each level. The graphic overrides are functioning properly on the 1st Floor (existing is displayed in lighter line weight and half-tone) but for some reason the overrides are not applying to the 2nd Floor.
Revit 2013. I Set up a color scheme for rooms. colors are fine but the colors go to middle of walls (interior and exterior) even tho walls are set to room bounding. Room and area calcs set to wall finish but in plan view and in sheet view the colors go to wall centers. Plotting the colors override/cover wall graphics. Created a quick "dummy" project using masonry walls and it worked fine.
Also, if you link a revit file with additional rooms how do you add those to color schedule? Cant jus add room in host file - says its not properly enclosed. putting room in the linked file doesn't seem to allow room to be read/scheduled/displayed by name/number-just shows the room X with a + sign in middle. Adding color to linked file gets nothing but I want it controled in host anyway.
Alright, so I'm running Windows 7 64-bit and Illustrator CS5.
Times New Roman Regular does not display correctly on my machine when using Illustrator CS5, but Bold, Italic, Italic Bold display just fine. Times New Roman does display correctly in every other program I use. InDesign, Word, etc. I've attached a screenshot to show what I mean.
Three pdf's attached. I can't get the glass in the glass sidelight to display in the project plan view, and a threshold-like thing is shown in the project plan view that shouldn't be there. The frame (jambs, sidelight sill and head, and door frame head) and glass sidelight were assembled in the family editor using extrusions.
When I use select object, it never displays the marquee correctly. One of two things will happen.
It will
1. Not even display the marquee at all e.g. I use select object by rectangular selection and the rectangle marquee box is invisible (although I can still select things)
or
2. If the marquee does display it shows it behind the objects, instead of in front of them, as scene in the image below.
I have a utilities file with existing water and FM as shown in picture 1. But when I reference it into my sheet, the text becomes very tiny. Is there a setting for paper space I should change? The dash is correct, just the letters get small, so changing the ltscale in the original drawing blows up the dash also so that won't work.
Windows 7 x 64 Nvidia GeForce GTS 450 8 GB Ram Intel Core i5-2310 @ 2.90 GHz v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
I have autocad running on my partitioned mac and I have just created a multileader style with Datum triangle filled as the arrowhead symbol. In the view panel the symbol looks correct, but when I select the multileader with this datum style and add it to my drawing it appears as an unfilled triangle!
I am running a corridor in Civil 3D 2012 that has two baselines. Issues with multiple baselines in section views, but understand this problem was eliminated in 2012? In any case, this does not seem to by my issue. Attached you will find a section view through the two baselines (one is for a general overlay, the second for widening). The section view seems to display correctly at station 3+75, but 25' feet further down the road it does not display the corridor assemblies correctly (as can be seen by the lack of a ditch and shoulder overlay in the second image).
I have checked the code styles to make sure all links are included, as well as the comparing section view properties. All settings and styles appear to be the same, and the corridor seems to be built correctly. If I sample the Finished Grade corridor surface, it displays in section view as if the ditch were there (see third image).
Civil 3D 2010 & 2012 HP Z400 Workstation Intel(R) Xeon(R) CPU W3550 @ 3.07 GHz 6GB of RAM 64-bit OS NVIDIA Quadro 2000 running driver version 8.17.12.7105 Win 7 Professional
I recently upgraded to Snow Leopard and Creative Suite CS5, Adobe Illustrator CS 15.1.0. I'm using Suitcase Fusion 4 ver. 15.0.5 (latest version). I'm having a problem with 2 of my fonts loading correctly in illustrator's Character pallet. They display like a missing fonts in the character pallet as shown in my screen shot with "less than" characters around them: < Carta >, , < ITC Zapf Dingbats > These fonts and files do not give me warnings for missing fonts. The files print and rip correctly. The font displays correctly in illustrator when I use them in a layout (as shown on pic). They also display correctly and are fine in all other applications: Quark, InDesign, Photoshop etc. My fonts are setup correctly, pared down system fonts, other user folders emtpy etc. I have font nuked with Suitcase, Font Nuke and did a safe start up to clear font caches. several times. I've also removed these fonts from suitcase and loaded them in my system folder to see if that fixed it. These fonts are used 1,000's of pages/files so replacing them with another verion isn't really an option.
We've just started using ACA 2012 and have noticed when importing files created in ACA 2009 that structural members do not display properly. We use the structural column or beam to represent a rainwater or soil pipe and are expecting to see a cut through at the cut plane and nothing else however we are getting a couple of lines that represent the crank in the pipe and I cannot turn them off. I'm sure that a setting has been introduced somewhere however after two weeks of looking I am still in the dark.
I've attached a file created in ACA 2009 that displays the problem in ACA 2012
I am running ACA 2011 X64.I have some leaders that I copied from one drawing into another drawing.
When copied the leaders do not display their attributes. I cannot seem to figure out how to do it. I have made sure they are both in the same annotative scale and that both have the current scales loaded.
We are currently using 2012 Civil 3D, and we have a issue with a drawing that not all the Pipes from the pipe network are displaying in the Profile, and even the pipe properties display box the lengths show up way too long and the stationing does not display correctly in this pipe properties box either.
The Big Twist is that we have 2 machines in the offices that will display the drawing correctly, in profile view and pipe properties display box has correct lengths and stationing. So we know it is not styles, etc.
Direct support has suggested we un-install all Autodesk products and reinstall them all again, we tried the repair, however this did not work. Any other way before we have to go through all this work, as we are looking a huge amount of downtime, and we do not think this is the issue. Perhaps a Civil 3D variable or Autocad variable is different?
I've created a 3D product model in an application that does not have any text capabilities (Autodesk Inventor Fusion 2013). I'm trying to get that model into AfterEffects (AE) via the Photoshop live object technique.
But before I open it in AfterEffects, in Photoshop CS 5.5 Extended, I'm trying to add the product text graphics to the "Diffuse" layer of the model so, when animated in AE, all the text moves with the appropriate perspective, etc.
For the life of me I can't figure out how to format the text to fit the model.
Fusion saves files natively to .DWG format, but they appear non-standard and without some key data.
I was able save the file as a "STEP" file .stp, then translate to .3DS format. That file results in a model that opens just fine in Photoshop and when saved in .psd format, and opened in AE as a Photoshop Live object, works fine. I can't image getting the text on the surface in AE would be easier/better than Photoshop.
Each time I double click on Layer 1's Diffuse (texture) sub-layer (is that the correct term?), I can put some text in the new window, but the scale is always way wrong, the orientaion is 90 degrees off (counter clockwise), and the text is clearly trying to wrap and repeat all around the model. I'm just trying to get a set of text (several pieces in different locations - company name, product name, some small additional text) on one side of the surface bound as if it were part of the model.
As an aside, I did try to add the 3D model, converted to a .DAE file, to presets > meshes as suggested in the help files, so I could treat it like one of the 3D object presets, and add the text that way.
No matter what I do I can't get the mesh to appear in the pre-set list. I don't see any way to "activate" the mesh other than place the file in .DAE format in that folder. Yes, I've exited and re-started Photoshop many times.
I downloaded an image of a web template to look at the colours more closely before possibly purchasing it and when I opened the image in CS4 it had a bunch of triangular blocked out areas - kind of like a mask of some sort I think. I then tried creating a new document and opening an existing, unrelated PSD file and now they have the same triangular blocked out areas.
I have a background texture which was create in photoshop which I'm trying to display to iOS. I'm converting it to a PNG-24, and when I put it on the phone, the colors don't come out right (it's suppose to be yellow, instead comes our orangey). I've tried following the instructions here [URL]... changing some of the color settings and I still can't get it to work. The file is only 600kb large and is shown below:
I have CS6 (CC) on a Mac (2013). I wrote an action for saving my work. In my normal .psd file, I use multiple layers for editing, etc. I also use a group folder for my B&W conversion. I made an action to utilize the saved .psd file to save both the color and the B&W versions. The B&W action works completely fine. However, the Image Processor will not properly run the color action. It tells me that "The object “layer “B&W”” is not currently available." If I open a .psd file and run it manually, there are no issues.
what do I need to change to have the IP correctly run the action?
Photoshop displaying image differently on a same screen in different placement. Same image when moved a bit to the left changes image saturation. This is happening only in photoshoop CS6. I have two older versions of photoshoot that are working just fine. No other program is shoving behiever like this. I tried different files jpg .psd .png, same behavior.
I have Windows 7 and recently unistalled PSE 10 and it did not have this issue; Now Photoshop CS6 is displaying the menu dropdowns as shown in Image 1. Bridge CS6 does not have the issue;it is showing the menu bars correctly (see Image 2). I downloaded and installed all updates.
I saved an image attached to an email in jpg with 4000 x 2664 pixels to the organizer. Even though I designated jpg format, it was saved in png and was downsized to 150 x 100 pixels. How do I save the attachment in jpg format and not be downsized?
I'm trying to create a timelapse sequence using CS4 Extended. Im using an iMac with Snow Leopard... LR4, and CS4Extended.
I've got my sequence of shots, edited in LR - and exported to a new folder.
Using file Open, I select the folder with the images in, click on the first image only... but the Sequence box is greyed out, and I can't use it - or make the time lapse.
I've been using CS4 Extended for 3+ years with no problem, and suddenly it is giving me the message, "Adobe Photoshop CS4 Extended has experienced a problem and must close..." This also happens when I try to set Preferences. I'm using XP 5.1, SP3. I've installed the latest updates, but the Camera Raw 5.7 update fails to install.
Here is my system info:
Adobe Photoshop Version: 11.0.2 (11.0.2x20100514 [20100514.r.591 2010/05/14:02:00:00 cutoff; r branch])Operating System: Windows XP 32-bitVersion: 5.1 Service Pack 3System architecture: Intel CPU Family:15, Model:2, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2Physical processor count: 1Processor speed: 2524 MHzVideo Card: NVIDIA GeForce4 MX 420Video Mode: 1280 x 1024 x 4294967296 colorsVideo Card Driver: nv4_disp.dllDriver Version: 6.14.10.5216Built-in
