Trying to import an SVG file from this Wikipedia page I noticed that the text of the Brasilian flag does not get imported correctly by CorelDRAW X6.
Similar errors occur for:
Wikipedia, Spain flag
Wikipedia, Portugese flag
Wikipedia, Chinese flag
I pay for seriously expecting Corel staff members to not just read in here but to fix Corel programs' problems I report.But they do nothing.
I have a problem exporting a file to TIFF format as the text spacing becomes "corrupted".The text is just a simple text block, pick any font you want (i.e. Arial). I export the file as TIFF format with the following changes of note:
Do not select "Maintain Aspect Ratio".Change the vertical scaling to something like 140% (nothing magical about 140%, just something that stretches it out enough)
That's it. When the text comes out, the letters are all stuck together, either overlapping or touching. This happens with TIFF, PNG or BMP format, but it does not happen when I export GIF or JPG format. Of course, converting the text to curves prior to export also produces the correct result.
Of course, the reverse also happens if I scale vertical to less than 100%, the characters get spaced out farther than they should. I cannot really convert to PNG then to TIFF as I need to maintain the CMYK colorspace on this one. I also do not "pre-scale" the image correctly in CorelDraw first because I actually need to export the image to several different aspect ratios and I would like to maintain only one "master" source image.
Even the most simple documents are not correctly exported/imported from/to CorelDRAW.
Just try to enter some graphical text using two different (uncommon) fonts... Export as SVG and re-import the file as a new document into CorelDRAW...
@ Corel: Either drop the SVG format from your import/export formats drop down box or get the standard correctly implemented.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
i upgraded to CS6 photoshop and now i am having problems with multichannel photoshop files not importing correctly into CorelDraw x6. Either no channels appear at all or some will be missing or misnamed.
i realize that X6 may not have the latest and greatest import filters for the latest in Adobe products.
i have even saved the psd files as rgb and grayscale, hoping the issue was just multixhannel but that did not work.
I have tried literally everything but I'm really lost right now. Photoshop won't import mp4 or any other file, it only accepts avi container files. It's a pain to convert every single file to avi if I want to use Import > Video frames to layers.
I have already installed Quicktime Pro but that doesn't seem to work.
When I try to import dwg with xrefs I see only the dwg without it´s xrefs. I tried the "import" function because the same thing doesn´t work with "manage links" function. I created a very imple drawing to resolve it. A dwg with a simple box in it and a linked xref, with a sphere. In the import file dialog I check the xref option. Both files are in the same directory, I tried it with local and network paths. When I move the xref to another folder (so that AutoCAD can´t find it) in MAX doesn´t come up the "Resolve External Reference Dialog".
View 9 Replies View RelatedOn my MAC LR4 doesn't import .RAF files. It says "because they couldn't be read".
On my PC everything is OK. What can I do about it?
I've seen many messages about this problem, for people using Corel X5 (and maybe X3 and X6) and Windows XP.
You double-click on the .CDR file name, but instead of the file opening, you get this error message:
If I drag the file to CorelDRAW, it opens. Same applies to .JPG and other files associated with PHOTO-PAINT.
I love CorelDRAW, but I'm convinced this is a BUG that seems to be ignored. It's been around for years. It's basic to how Corel works and works with Windows--I don't understand why they don't fix it. This is quite an annoyance; the good thing is I can always open the file by dragging it.
CorelDRAW version is 15.2.0.695. WinXP is Professional Version 2002, SP3. Found no answer in the Corel Knowledgebase. Never had this problem with CorelDRAW v.2-12.
This is very troubling. I work with Autocad files, currently Acad 2010 is being used in the office.
I'm trying to import a siteplan for coloring, and I can't get the darn thing into X5. I import as a .pdf (created from Autocad) and I get a "file is corrupt" error. I'm used to that in X3, with Adobe upgrading the .pdf standard, but X5 should be able to read these files, right? This is the solution I'd prefer as it would be a one-step process, all lineweights and text spacing, etc. shouldn't change from the original file. At least one would think so.
If I import as a .dwg or .dxf, I get the expected dialogs, but after the font-matching dialog, CorelDraw shuts down with no explanation! Poof! I've gone back 15 years saved the .dxf as release 14 and still, poof!
I'm going to have to use X3 until this gets resolved...
Weld doesn't seem to work correctly on some ARCs, though I don't quite know which ones yet. Here's an example - A left and right box created to allow two hemispheres to be made. Now try to "weld" them into a circle, and the program fails and delets both, replacing them with some rubbish.
This is most definitely a bug... It's very unusual behavior. Also, when ARCs are used in a welded shape, and it's extruded, it sometimes fails to make a solid. I found that two arcs with two polylines worked, but four arc and four polylines did not.
Also, if we're submitting bugs via Corel rather than directly with Graebert, is it possible to get a bug tracking list on the forum?
Update: Took this ( and others ) to Corel Support. They looked into it, and apparently weld doesn't do what the training videos say it does ( and it doesn't quite do what AutoCAD thinks either ) - but it's all moot.
To do this - Type PEDIT and then M for Multiple polylines. Select and convert them all, then JOIN. Works beautifully. So, if connecting lines, don't use WELD or JOIN - use PEDIT and convert to Polylines first.
I've got an SVG file, it was generated by a program which generates such things, its completely valid according to the W3C validator. If I try to open it or import it into Corel X5, X5 crashes. I send off a WER to Corel hopefully (it says it sends it but one never knows for sure.)
My system Win XP (32 bit, SP3), 3.5GB of RAM, 500+GB free hard drive space..Corel X5 - I am pretty sure it has SP2 applied it calls it self 10.2.0.661 in the About menu.
how to import a large number of .eps files that are templates into corel draw x3 so that when I click create new from template, these files come up in the list?
View 2 Replies View RelatedI just noticed that there was a specific help option in DRAW X3 for issues re Office suite programs, and therein was the claim that it is possible to easily import files from MS Office apps. Having had little luck in the past attempting to do this, I was skeptical. So far, all I get are msgs to the effect that this format file cannot be imported using the available filter. I'm just assuming that this means that perhaps doc files can be imported, but not docx... Is there a fix for this? The company is planning on buying X6 soon. Does it support docx imports?
View 5 Replies View RelatedIs there a way of choosing not to import layers from any file that has layers? AI, DXF, PDF, EPS, TIFF, PSD?
View 3 Replies View RelatedI have the page numbering macro. It works on new files; however, it doesn't work on specific saved files. What could be wrong with those files? Is there any way to enable the page numbering macro in those files?
I use Corel Draw X3, by the way.
When I use Patch Tool in Normal mode, photoshop leaves a transparent mark on the replacement area.
System Info
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 1995 MHz
Built-in memory: 3067 MB
Free memory: 1758 MB
[code]...
It doesn't happen very often (apparently, 8 days ago was the last time), but I would like to know more about this error.
The .png I've attached shows what happens more easily than I can describe it.
It only happens on Part1 (and possible Assembly1?). If I've made a new part and the menu loaded correctly, it won't load improperly on a later new part (, like Part2, Part 3, etc). It does not happen saved parts that I open. If I have other files open when this happens, the Manage menu seems to be correct in any file, but Part1. Closing IV and reopening has fixed it every time, but one. The time closing/reopening IV didn't fix it, I closed it again, and reloding IV again, the menu was fine.
The visible portions of the buttons work correctly, but the empty spaces where the icons for the button should appear, do nothing.
No other tab has done this.
I do need to display the correct surface side to varify if any surface normal is wrong sided. But all the time surfaces are displayed in the force 2-sided mode, although the setting is off. I use the Nitrous driver but tested it also on all other drivers whithout success. Older 3dmax versions doesn't have had this problem on the same machine. See the attachment where I added the renderer where the object is displayed correctly. How can I get the result within the viewport?
View 1 Replies View RelatedI'm using Coral Draw X5 and Sign Cut Pro with a Vinyl plotter and Im trying to import files into X5 and export them to Sign Cut. Which file formats should should I be using?
View 14 Replies View RelatedI have encountered an error when I imported a prn file to coreldraw x4 in win7.
after i choose that the file be imported as curve this error is showing :
Error: definefont
OFFENDING COMMAND: defineresource
STACK:
/TT15ET00
/TT15ET00
-dictionary-
When importing .svg files into draw and illustrator the size of the objects is different. The svg files have been created with a dpi=72. Illustrator reads the file at that dpi so objects are the correct size. Draw appears to read the files with a dpi=96 which scales the objects down to 3/4 actual size.
Any SVG attribute that can set the dpi so that both programs import correctly Or is there a way to tell Draw to use a dpi=72?
I'm pretty sure that 'Keep faces together' when extruding does not work correctly in 2012. Well not on my mac anyhow. If you wish to replicate my problem here is my workflow-
Create cube poly > make some subdivisions> select some faces> extrude with 'keep faces together" unchecked> Select a face and use move tool, notice that faces will move apart as they should> Now select some more faces> extrude with 'keep faces together' checked this time> select a face and use move tool> notice how face is still separate as it SHOULD NOT be.
I'm using GIMP 2.6.11 on Windows XP. I use "ALT + PRINT" to capture the active program's screen and "Edit -> Paste as -> New Image" to create a new image from the captured screen.
The problem is that the new image always shows extra lines (about 3-pixel wide) on the left side and clips the right side. I haven't verified it pixel-by-pixel, but it looks like what's clipped on the right side is displayed on the left side.
But the problem doesn't happen when I do "File -> Create -> Screen Shot -> Grab a single window"; it shows up nicely.
Also even when I use "ALT + PRINT" to capture, the problem doesn't happen when I paste it to a different program, such as Windows Paint or even WordPad; it happens only when I do "Paste as New Image" in GIMP.
This problem has never been in CS6, it is only in the CC. When I past an object from Illustrator CC to PowerPoint I see unexplaned code.
View 2 Replies View RelatedI want to import a .ps file I used to create via latex and gnuplot. I can import the graphics and so on, however I get the question if I should import the text. Then I want to import it as curves. However I get asked again which font I want to use. Afterwards I got a partly mess, becuase Corel Draw X6 only imports a few letters correctly. How can I import all letters and numbers as curves?
View 13 Replies View RelatedI am trying to import a pdf file ford connect van template into CorelDraw x5 but am having no joy.
View 2 Replies View RelatedI'm unable to open/import .ai files into corel x4. Getting "corrupted file" error.
View 5 Replies View RelatedTiff files flipping on both horizontal and vertical when importing? Client gave me a Corel PDF from an originally imported Tiff image and it's done it. Perhaps something when importing?
I can bring it in ok in CD v5.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I am trying to write a script that will automatically hatch several drawings. The drawings contain an area in which there are several objects that need to be hatched. For each drawing the objects vary in location within the one area.I figured I would set up my script to encompass the area with the object select hatch technique. This works fine if the objects in the area have no Islands. However when an object within the "object select hatch area" contains Islands it shades the whole object ignoring the Island or if it does recognize an island it will create an individual hatch for it.
However when I use the pick internal point method the hatch comes out as expected for the object with the Islands in it.
I created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)