CorelCAD :: Weld Doesn't Seem To Work Correctly On Some ARC
Nov 17, 2013
Weld doesn't seem to work correctly on some ARCs, though I don't quite know which ones yet. Here's an example - A left and right box created to allow two hemispheres to be made. Now try to "weld" them into a circle, and the program fails and delets both, replacing them with some rubbish.
This is most definitely a bug... It's very unusual behavior. Also, when ARCs are used in a welded shape, and it's extruded, it sometimes fails to make a solid. I found that two arcs with two polylines worked, but four arc and four polylines did not.
Also, if we're submitting bugs via Corel rather than directly with Graebert, is it possible to get a bug tracking list on the forum?
Update: Took this ( and others ) to Corel Support. They looked into it, and apparently weld doesn't do what the training videos say it does ( and it doesn't quite do what AutoCAD thinks either ) - but it's all moot.
To do this - Type PEDIT and then M for Multiple polylines. Select and convert them all, then JOIN. Works beautifully. So, if connecting lines, don't use WELD or JOIN - use PEDIT and convert to Polylines first.
View 5 Replies
ADVERTISEMENT
Jun 1, 2012
When I use Patch Tool in Normal mode, photoshop leaves a transparent mark on the replacement area.
System Info
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 1995 MHz
Built-in memory: 3067 MB
Free memory: 1758 MB
[code]...
View 2 Replies
View Related
Feb 2, 2012
I'm pretty sure that 'Keep faces together' when extruding does not work correctly in 2012. Well not on my mac anyhow. If you wish to replicate my problem here is my workflow-
Create cube poly > make some subdivisions> select some faces> extrude with 'keep faces together" unchecked> Select a face and use move tool, notice that faces will move apart as they should> Now select some more faces> extrude with 'keep faces together' checked this time> select a face and use move tool> notice how face is still separate as it SHOULD NOT be.
View 1 Replies
View Related
Feb 17, 2014
This problem has never been in CS6, it is only in the CC. When I past an object from Illustrator CC to PowerPoint I see unexplaned code.
View 2 Replies
View Related
Mar 28, 2012
I am trying to write a script that will automatically hatch several drawings. The drawings contain an area in which there are several objects that need to be hatched. For each drawing the objects vary in location within the one area.I figured I would set up my script to encompass the area with the object select hatch technique. This works fine if the objects in the area have no Islands. However when an object within the "object select hatch area" contains Islands it shades the whole object ignoring the Island or if it does recognize an island it will create an individual hatch for it.
However when I use the pick internal point method the hatch comes out as expected for the object with the Islands in it.
View 5 Replies
View Related
Feb 21, 2014
I created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)
View 19 Replies
View Related
Jun 5, 2011
CorelCad seems to match up fairly closely and exports nicely to my AutoCad LT 2011, mostly, but I can't seem to get the Export to CorelDesigner function to work. It goes through the conversion process, but the file never actually generates. I have the Trial version (registered).
Does CorelCad has an ALIGN object (entities) command?
View 3 Replies
View Related
Sep 12, 2011
I'm trying to model glasses. I have completed the frame and the handle. They are different parts of the 3D object. [URL] ...
Now I would like to connect them together. I tried to choose some vertixes and use cap poly tool to cap them. But it doesn't work: [URL] ....
Then I tried to move those vertixes close to each other and use the weld tool but it doesn't work either.
I have had many problems connecting different objects together with cap poly and weld vertixes tools in the past and now I would like to know is this a bug or what I'm doing wrong?
View 2 Replies
View Related
Aug 9, 2013
I know you can change the leader style and the text style in a weld symbol...I can't seem to find a style for the parts?
Specifically I'm trying to change the color, I'd like the enirety of my weld callout to be a different color...just for visually tracking and locating on the drawings.
So if I change it to orange...right now the leader and text are orange but the weld symbol itself and the tail are still black.
Inventor 2014
Windows 7 Pro SP1
Intel(R) Core(TM) i7-3770k CPU @ 3.50GHz
16GB RAM
NVIDIA Quadro 4000
3D Connexion SpaceMouse Pro
View 2 Replies
View Related
Jan 5, 2013
Trying to import an SVG file from this Wikipedia page I noticed that the text of the Brasilian flag does not get imported correctly by CorelDRAW X6.
Similar errors occur for:
Wikipedia, Spain flag
Wikipedia, Portugese flag
Wikipedia, Chinese flag
I pay for seriously expecting Corel staff members to not just read in here but to fix Corel programs' problems I report.But they do nothing.
View 13 Replies
View Related
Sep 20, 2012
It doesn't happen very often (apparently, 8 days ago was the last time), but I would like to know more about this error.
The .png I've attached shows what happens more easily than I can describe it.
It only happens on Part1 (and possible Assembly1?). If I've made a new part and the menu loaded correctly, it won't load improperly on a later new part (, like Part2, Part 3, etc). It does not happen saved parts that I open. If I have other files open when this happens, the Manage menu seems to be correct in any file, but Part1. Closing IV and reopening has fixed it every time, but one. The time closing/reopening IV didn't fix it, I closed it again, and reloding IV again, the menu was fine.
The visible portions of the buttons work correctly, but the empty spaces where the icons for the button should appear, do nothing.
No other tab has done this.
View 7 Replies
View Related
Sep 12, 2012
I do need to display the correct surface side to varify if any surface normal is wrong sided. But all the time surfaces are displayed in the force 2-sided mode, although the setting is off. I use the Nitrous driver but tested it also on all other drivers whithout success. Older 3dmax versions doesn't have had this problem on the same machine. See the attachment where I added the renderer where the object is displayed correctly. How can I get the result within the viewport?
View 1 Replies
View Related
Oct 1, 2012
I have a problem exporting a file to TIFF format as the text spacing becomes "corrupted".The text is just a simple text block, pick any font you want (i.e. Arial). I export the file as TIFF format with the following changes of note:
Do not select "Maintain Aspect Ratio".Change the vertical scaling to something like 140% (nothing magical about 140%, just something that stretches it out enough)
That's it. When the text comes out, the letters are all stuck together, either overlapping or touching. This happens with TIFF, PNG or BMP format, but it does not happen when I export GIF or JPG format. Of course, converting the text to curves prior to export also produces the correct result.
Of course, the reverse also happens if I scale vertical to less than 100%, the characters get spaced out farther than they should. I cannot really convert to PNG then to TIFF as I need to maintain the CMYK colorspace on this one. I also do not "pre-scale" the image correctly in CorelDraw first because I actually need to export the image to several different aspect ratios and I would like to maintain only one "master" source image.
View 10 Replies
View Related
Nov 4, 2011
I'm using GIMP 2.6.11 on Windows XP. I use "ALT + PRINT" to capture the active program's screen and "Edit -> Paste as -> New Image" to create a new image from the captured screen.
The problem is that the new image always shows extra lines (about 3-pixel wide) on the left side and clips the right side. I haven't verified it pixel-by-pixel, but it looks like what's clipped on the right side is displayed on the left side.
But the problem doesn't happen when I do "File -> Create -> Screen Shot -> Grab a single window"; it shows up nicely.
Also even when I use "ALT + PRINT" to capture, the problem doesn't happen when I paste it to a different program, such as Windows Paint or even WordPad; it happens only when I do "Paste as New Image" in GIMP.
View 4 Replies
View Related
Mar 28, 2014
How can I get page numbering to work correctly?
View 5 Replies
View Related
Nov 5, 2012
I am using photoshop CS6 on a 64 bit windows system and my Cintiq 12 will not function with the pressure sensitivity.
View 3 Replies
View Related
Jul 23, 2013
I found that those shortcuts of the 'Character Panel' don't work correctly in Photoshop CC.
For example :
Press [cmd(ctrl)+ shift + >]→Increase or decrease the font-size with a step of 33.74px every time I press the shortcut.Previous version of Photoshop just changes the font-size with a step of 2px.
The same problem occurs while using the shortcuts to control tracking or leading etc... Obviously the 'step' is not correctly.This could be a critical problem for me.
Aonther problem is if you try to set the font-size to 100,it will say this 'A value between 0.01 pixel and 1296.00 Pixels is required.
View 5 Replies
View Related
Jul 6, 2012
The file naming scheme to add a letter or number to a file name does not work correctly.
Using the Save Image function in CR if I select a File Naming scheme of Document Name = Serrial Letter, I get a file that has a letter 'a' added to the end.
Subsequent saves maintain this 'a' and then add an underscore and an incrementing number. If I select a serial letter then the letter should be the only thing added and it should increment with subsequent saves.
What happens now:
Original file: IMG8102.CR2
First Save: IMG8102a.jpg
Second Save: IMG8102a_1.jpg
Third Save: IMG8102a_2.jpg
What should happen:
Original file: IMG8102.CR2
First Save: IMG8102a.jpg
Second Save: IMG8102b.jpg
Third Save: IMG8102c.jpg
Why would I get a number when I asked for a letter?
View 7 Replies
View Related
Dec 12, 2012
I would like to bring in some of our linework into WS so it can be viewed on an iPad or smartphone with the GPS location referenced to the linework. Our dwg files projection is set for the NAD83 California Coordinate System, Zone 6, US survey feet.
Does the line work need to be projected before uploading to WS to use the GPS correctly? I understand there is also a units issue...but for some reason the location is never where it should be.
View 2 Replies
View Related
Jun 19, 2013
If I had some custom lisp routes that I used with ACAD 2009, then 2012...do you think I would need to upgrade, modify or change any of the lisp to work correctly in 2014?
Could a custom lisp that I used in 2012, corrupt, effect performance, screw with other key commands (although with worked in the 2012 software) in 2014 if I didn't upgrade the 2012 lisp?
View 1 Replies
View Related
Jun 12, 2012
The PS I downloaded from CC doesn't work -- no illumination and some other functions -- I deactivated and re-uploaded -functions and then crashed agian -- computer is new and shouldn't be the problem.
View 6 Replies
View Related
Sep 9, 2012
Firstly - when I create a document at 48x48 at 72ppi, it comes out as you would expect, 48x48 on a screen. However if I enter 48x48 and try to enter 326ppi, it doesn't adjust the canvas size at all.
Also when I have my 48x48 72ppi document open and go to image > image size, and adjust only the ppi to 326...it does nothing! What should be happening is the canvas become 72:326 ratio larger to reflect the new ppi, or in other words, make the canvas size larger in proportion to this so when you take your new 326ppi image to the iphone it is retina at 48x48...however this is clearly not happening.
View 1 Replies
View Related
Nov 24, 2008
In Photoshop CS2, I select Help > How to fix and enhance photos > to touch up spots, scratches, and wrinkles. Instead of help on that, Adobe Help Center 2.1 shows up with nothing in it.
View 2 Replies
View Related
Nov 22, 2013
I have an old version of the creative suite that is all right for what I do (information for a charitable organisation for medical research) installed in 2008. For quite a while now every once in a while when I start up I get a screen asking me to register. But since I already am registered Adobe just said to click on later and go on working. But this morning the screen is empty so I can't click anywhere. I've tried restarting and even turning off the computer and trying to restart my day.
View 2 Replies
View Related
May 13, 2012
i have photoshop extended CS6 since yesterday and today when i was going to save an animation, go to file- save for web, this appears "the operation could not be completed".
View 3 Replies
View Related
Feb 17, 2013
a few days ago Photoshop disabled my 3D features with the new upgrade.my Macbook Pro has 4G of DDR3 RAM...what am I missing here?
View 2 Replies
View Related
Jun 18, 2013
OpenCL doesn't seem to work for me. I have it checked in prefs, have the latest drivers, and a GeForce GTX 660M. Yet when I run an iris blur filter, it's extremely slow, and only uses 1 CPU. Under System Info, it lists the video card and OpenCL 1.1.
View 24 Replies
View Related
Apr 16, 2013
I've just upgraded to Photoshop CS6, and did the update to v13.04. Get a message with Save for Web: "The operation could not be completed. A write permissions error has occurred." There is a bug fix for v12 for exactly this, but CS5.5 (not sure which version of 12 it was) worked fine on this machine. On a Macbook 17 inch running OSX 10.7.5 with 8gig Ram and 2.5 Ghz I7.
View 3 Replies
View Related
Sep 25, 2013
When I tried to add text it doesn't really work. For example: Let's say I type in "Whats your name?" It won't show I typed unless I go click on a different tab and then go back to it. And the question mark will be in the front instead of in the back. And if I try to erase it, it won't erase.
View 2 Replies
View Related
Apr 29, 2013
I have a copy of CS6 Extended and upon installation it is only the regular version of CS6. I do not know how to install the extended features,
View 5 Replies
View Related
Aug 28, 2012
I have a Geforce 8600M GT in my Macbookpro 10.6.8 2.2 GHz Intel Core 2 Core with 4GB 667 Mhz DDR2 SDRAM. I tried using it for 3D in PS6 but it doesn't seem to be 'enabled' and OpenGl unavailable. In the preferences in PS it states that graphics hardware unavailable and that I should upgrade my driver or card but on the adobe specifications for PS6 my card seems to comply and I can't find anything to update.
View 11 Replies
View Related
