I have a Geforce 8600M GT in my Macbookpro 10.6.8 2.2 GHz Intel Core 2 Core with 4GB 667 Mhz DDR2 SDRAM. I tried using it for 3D in PS6 but it doesn't seem to be 'enabled' and OpenGl unavailable. In the preferences in PS it states that graphics hardware unavailable and that I should upgrade my driver or card but on the adobe specifications for PS6 my card seems to comply and I can't find anything to update.
View 11 Replies
I'm about to replace my aging computer and need advice on the video card. The above is standard and the Nvidea 9500 GS or ATI Radeon 4650 are offered at nominal cost for upgrades. I have no interest in gaming and don't watch movies on the monitor.
View 7 Replies View RelatedI just bought a brand new Alienware M17x R4 with Windows 8 Pro x64 and Photoshop CS6 won't recognize my NVIDIA GeForce GTX 675M GPU?I've already updated Windows 8, Photoshop and the Nvidia graphics driver.
Â
I spent so much on a nice graphics card but now it seems PS CS6 can't even use it. It's using the Intel HD4000 instead: I also tried this: URL... According to this, my graphics card should work, it's a NVIDIA GeForce GTX 675M, which is a 600 series GPU: URL...Tested video cards for Photoshop CS6 #.
Adobe tested the following video cards before the release of Photoshop CS6Â. This document lists the video card by series. The minimum amount of RAM supported on video cards for Photoshop CS6 is 256 MB. Photoshop 13.1 cannot display 3D features if you have less than 512 MB VRAM on your video card.
Important: This document is updated as newly released cards are tested. However, Adobe cannot test all cards in a timely manner. If a video card is not listed here, but was released after May 2012, you can assume that the card will work with Photoshop CS6.Adobe tested laptop and desktop versions of the following cards. Be sure to download the latest driver for your specific model. (Laptop and desktop versions have slightly different names.)nVidia GeForce 8000, 9000, 100, 200, 300, 400, 500, 600 series.
The PS I downloaded from CC doesn't work -- no illumination and some other functions -- I deactivated and re-uploaded -functions and then crashed agian -- computer is new and shouldn't be the problem.
View 6 Replies View RelatedFirstly - when I create a document at 48x48 at 72ppi, it comes out as you would expect, 48x48 on a screen. However if I enter 48x48 and try to enter 326ppi, it doesn't adjust the canvas size at all.
Â
Also when I have my 48x48 72ppi document open and go to image > image size, and adjust only the ppi to 326...it does nothing! What should be happening is the canvas become 72:326 ratio larger to reflect the new ppi, or in other words, make the canvas size larger in proportion to this so when you take your new 326ppi image to the iphone it is retina at 48x48...however this is clearly not happening.
In Photoshop CS2, I select Help > How to fix and enhance photos > to touch up spots, scratches, and wrinkles. Instead of help on that, Adobe Help Center 2.1 shows up with nothing in it.
View 2 Replies View RelatedI have an old version of the creative suite that is all right for what I do (information for a charitable organisation for medical research) installed in 2008. For quite a while now every once in a while when I start up I get a screen asking me to register. But since I already am registered Adobe just said to click on later and go on working. But this morning the screen is empty so I can't click anywhere. I've tried restarting and even turning off the computer and trying to restart my day.
View 2 Replies View Relatedi have photoshop extended CS6 since yesterday and today when i was going to save an animation, go to file- save for web, this appears "the operation could not be completed".
View 3 Replies View Relateda few days ago Photoshop disabled my 3D features with the new upgrade.my Macbook Pro has 4G of DDR3 RAM...what am I missing here?
View 2 Replies View RelatedOpenCL doesn't seem to work for me. I have it checked in prefs, have the latest drivers, and a GeForce GTX 660M. Yet when I run an iris blur filter, it's extremely slow, and only uses 1 CPU. Under System Info, it lists the video card and OpenCL 1.1.
View 24 Replies View RelatedI've just upgraded to Photoshop CS6, and did the update to v13.04. Get a message with Save for Web: "The operation could not be completed. A write permissions error has occurred." There is a bug fix for v12 for exactly this, but CS5.5 (not sure which version of 12 it was) worked fine on this machine. On a Macbook 17 inch running OSX 10.7.5 with 8gig Ram and 2.5 Ghz I7.Â
View 3 Replies View RelatedWhen I tried to add text it doesn't really work. For example: Let's say I type in "Whats your name?" It won't show I typed unless I go click on a different tab and then go back to it. And the question mark will be in the front instead of in the back. And if I try to erase it, it won't erase.
View 2 Replies View RelatedI have a copy of CS6 Extended and upon installation it is only the regular version of CS6. I do not know how to install the extended features,
View 5 Replies View Related how to overcome the horribly sluggish load time for photoshop CC?That is, when the app loads, it takes at least a minute before I can load a file, most of the time 2-3 minutes.I am running a quad processor 2.4GHz computer/8G ram that's less than 6 months old. Seriously adobe... This is ridiculous.
Â
It seems like all your content works similarly too. the "Creative Cloud" app is something of a joke. Takes 2 minutes to load, andother minute or 3 to show info, and when an app needs an update, well, jsut look out. You're in for a long wait while adobe chugs along at 1980s connection speeds. (I am on a 24 down 7 up connection, there's no excuse)
Suddenly the Alt key doesn't work with Clone and other Tools. When it's pressed, it shows a double arrow (black/white)cursor and a selection is not defined ...
View 10 Replies View RelatedI was working on a new file yesterday , and when I tried to switch to imageready it took too much time to do , but couldn't do So I saved the .psd file and then tried to directly open it in imageready cs2 then it said :
This file can't be directly edited in image ready ,switch to photoshop ?" and there was a button of switch !
So I thought maybe it's the file problem , So I opened a new document and tried to switch to imageready but the same problem ?
II am not able to start trial period of PS CS3, freshly downloaded and installed on clean Vista x64. It used to work but I reinstalled OS after SP1 and no success since. After clicking on 'I want to try for 30 days' I'm getting 'A problem was encountered while trying to load the trial period for Adobe Photoshop CS3'.
View 16 Replies View RelatedI am trying to run it from Bridge or from Photoshop. Photoshop stitches the images but when the process is done the document closes, resulting in no image.
Purging the selection / folder cache in Bridge prior to merging doesn't help.
Resetting the PS preferences solves the problem but only temporarily. The issue appears again when you try to make up another panorama.
I tried it on 4 RAW shots. Then on another set of 6 RAW shots.
SCRATCH DISK: 1 Tb
SYSTEM SPECS:
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:4 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 4
Logical processor count: 8
Processor speed: 2666 MHz
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 260/PCI/SSE2
Built-in memory: 3060 MB
Free memory: 1161 MB
Memory available to Photoshop: 1589 MB
Memory used by Photoshop: 70 %
I just upgraded to a new computer setup and installed Photoshop CC and well..... I can't figure out how to manipulate paths like in CS6.
Â
On the left is a what path manipulation with anchor points looks like in CS6 on my old slow iMac, and on the right is the new CC with direction selection on, but instead I can't manipulate paths. How can I get it to work like CS6? Also, I know about the isolating layers thing, but that still doesn't let me manipulate certain anchor points.
Â
why Command + . isn't allowed in CC as a hotkey?
the last few days the gaussian blur plugin does not work in Adobe Photoshop CS3.
View 2 Replies View RelatedWhen I open an Image in Photoshop CC the image does not appear in my work space. The tab identifies that the image is opened, layers shows the image is open, however it is not on the screen. All tools, brushes etc work, but I can't see what they are doing. I can only see the image if i click the tab and move it around. Once my mouse lets go of the image window it dissapears again. After moving it around and such it gets buggy and the image crashes not Photoshop. i have attached two screen shots of my problem. the second with the image, i have my mouse clicked, held down holding onto the window to acheive this.
View 1 Replies View RelatedHave the latest Macbook Pro 17" with i7 processor, 8gm memory, all that stuff, running all updates on everything. I've run into a first for me. I updated the OS this evening to the newest update from 10.7.3 to 10.7.4.
Â
Now Photoshop won't work. Gives the following on start up: "One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing. run the Photoshop installer and re-install Photoshop."
 Â
Used the whatever it is called downloader. After several hours and several attempts, it never finished and seemed to hang what I thought was near the end.So I chose to just do a straight download. After a couple of minutes, I have the Photoshop_12_1_LS1.dmg in my download folder. Moved it to the desktop. Tried to open. Gives me the following error: The following disk images couldn't be opened: Photoshop_12-1-LS1.dmg (reason) invalid checksum.
When I have a PSD file, and try to save it, It will now let me save it as an JPG, CS5 did. Even after flattening the image, I often find it does not work instead of saving it as JGP as wanted, it PS changes it to IMG.
I have just had the same trouble trying to save to PDF, PS changed the extension to JPF, I eventually found a work around, jut kept ging down the list of files, until PS decided to add the PDF extension I was after.
I have tried to completely remove CS6 and re install it, no difference.
PS CS3 Extended suddenly stopped working tonight on my two macs. PS starts up, then a blank white box appears and nothing happens. Have to force quit to exit PS. Happens on 24-inch iMac running OS 10.5.8 and a MacBook Air running OS 10.7.2. I reinstalled software, repaired permissions, nothing changes.
View 2 Replies View RelatedI have 512MB ram, windows 7, 300gb+ free space, CS3 Worked but i updated to CS6 now it just gives this [URL]...error same with Bridge.
View 10 Replies View RelatedI keep finding that when I copy something in one Photoshop document, then go to another Photoshop document and hit CMD V to paste and nothing happens. So I hit CMD V again and it pastes. This happens all the time. Why doesn't it paste the first time?
View 3 Replies View RelatedI installed yesterday the trial version of the CS6 Master Edition on two computers and the photoshop doesn't work on none of them. Both computer is running Windows 7 Ultimate 64bits.The message appearing is like that:
Â
"Could not open a scratch file as the file is locked, it is not necessary to have access permissions or another program using the file. Use the command "Properties" in Windows Explorer to unlock the file" (translated from portuguese, not well writter even in portuguese...) other issue identified, the uninstal of CS6 Master Edition blocks the alteration on the Photoshop.
In photoshop CS6 extended my 3D-extrusie does not work. Why? And can I fix this? I am a mac user.
View 14 Replies View RelatedAs a digital art teacher I need to check the files my students submit for authenticity. I noticed that since the last 2 CS Suite upgrades the "File info" functionality is no longer available (File>File Info). When I open a student file and I select this option, a blank window appears. I cannot click out of it so I have to do a "Force Quit" and restart the application. I work with Photoshop and Illustrator. I need to be able to see who created the file and when the file was created. How do I restore functionality? Is there a plug-in I need now? I work on a Mac in CS Suites 5.1
View 5 Replies View RelatedHere's my problem. From within Photoshop I get the following:
Â
Choosing Help > Updates... gives me the:
Â
Adobe Applications Manager
Says "Checking for Updates..." With spinning wheel below which never ends
Â
Is my Applicaitons Manager broken?Â
Just bought the new CS6, but already got a problem:
Color range in Photoshop doesn't work, every time I try to use it, it says, that there is a programming error.
