Photoshop :: CC Path Manipulation Doesn't Work Like CS6
Aug 14, 2013
I just upgraded to a new computer setup and installed Photoshop CC and well..... I can't figure out how to manipulate paths like in CS6.
On the left is a what path manipulation with anchor points looks like in CS6 on my old slow iMac, and on the right is the new CC with direction selection on, but instead I can't manipulate paths. How can I get it to work like CS6? Also, I know about the isolating layers thing, but that still doesn't let me manipulate certain anchor points.
why Command + . isn't allowed in CC as a hotkey?
View 8 Replies
ADVERTISEMENT
Nov 18, 2013
Photoshop CS6 the " save for web" function to save on a network location. This network location isn't available to me at this time and now when I want to "save for web" I get an error like " can't perform the job, system can't find the submitted path" (which isn't the exact error but translated from the dutch error: "Kon de bewerking niet voltooien. Het Systeem kan het opgegeven pad niet vinden."
View 4 Replies
View Related
Nov 24, 2012
Back in Photoshop CS3 (I skipped from CS3 to CS6, so no idea if you could do this in any other versions) if you CTRL clicked on a vector path between two anchor points, you could change the 'guidelines' extending from the anchor point either side of the line, and it would keep the lines at the same angle. However in CS6, when you do this it changes the angle of both of the lines. Is there a way to do it as it was done in CS3 ?
View 2 Replies
View Related
Jan 31, 2014
Draw closed paths with the Pencil toolSelect the Pencil tool.Position the tool where you want the path to begin, and start dragging to draw a path.After you’ve begun dragging, hold down Alt (Windows) or Option (Mac OS). The Pencil tool displays a small circle (and, in InDesign, a solid eraser) to indicate that you’re creating a closed path.When the path is the size and shape you want, release the mouse button (but not the Alt or Option key). After the path closes, release the Alt or Option key.You don’t have to position the cursor over the starting point of the path in order to create a closed path; if you release the mouse button in some other location, the Pencil tool will close the shape by creating the shortest possible line back to the original point.it doesn't for me. after i start drawing and i hold the option key, it goes to drawing a straight line. i don't hold the key till after i start drawing lit says.
same thing with the connect two paths. holding the command key doesn't change the behavior of the pencil tool.i'm guessing there is no way of remapping the 'smooth tool' to option again? or was it moved to another hotkey?
View 3 Replies
View Related
May 21, 2012
I'm trying to use the gradient annotator on a compound path. Moving the sliders and rotating the annotator works fine, but if I double click a slider and change the color the annotator disappears and the color of the slider stays the same. It works fine on non compound paths.
View 7 Replies
View Related
May 6, 2013
When creating a work path on a new layer, the path is a grayish black color is there a way to create that path to be a different color, yellow for instance? Using CS6, I don't see it in preferences anywhere
View 7 Replies
View Related
Aug 20, 2012
I'm trying to stroke my work path with a brush I tailored myself. now, when I create a workpath from my text layer and switch to my top layer to try and choose 'stroke path' the option is shaded out.
View 10 Replies
View Related
Jun 23, 2012
I'm trying about 8 hours to convert a Photoshop shape in to a working path in order to put a brush border around it. I don't understand why the "stroke path with brush" is grayed out and not usable directly on the shape path itself.
"Load path from selection" is not an option because it deforms my path.
View 3 Replies
View Related
Aug 20, 2012
The problem is that it's only loading the outline of my path as the selection. All the inner areas aren't included, and I want to chop them out as well
View 26 Replies
View Related
Jun 12, 2012
The PS I downloaded from CC doesn't work -- no illumination and some other functions -- I deactivated and re-uploaded -functions and then crashed agian -- computer is new and shouldn't be the problem.
View 6 Replies
View Related
Sep 9, 2012
Firstly - when I create a document at 48x48 at 72ppi, it comes out as you would expect, 48x48 on a screen. However if I enter 48x48 and try to enter 326ppi, it doesn't adjust the canvas size at all.
Also when I have my 48x48 72ppi document open and go to image > image size, and adjust only the ppi to 326...it does nothing! What should be happening is the canvas become 72:326 ratio larger to reflect the new ppi, or in other words, make the canvas size larger in proportion to this so when you take your new 326ppi image to the iphone it is retina at 48x48...however this is clearly not happening.
View 1 Replies
View Related
Nov 24, 2008
In Photoshop CS2, I select Help > How to fix and enhance photos > to touch up spots, scratches, and wrinkles. Instead of help on that, Adobe Help Center 2.1 shows up with nothing in it.
View 2 Replies
View Related
Nov 22, 2013
I have an old version of the creative suite that is all right for what I do (information for a charitable organisation for medical research) installed in 2008. For quite a while now every once in a while when I start up I get a screen asking me to register. But since I already am registered Adobe just said to click on later and go on working. But this morning the screen is empty so I can't click anywhere. I've tried restarting and even turning off the computer and trying to restart my day.
View 2 Replies
View Related
May 13, 2012
i have photoshop extended CS6 since yesterday and today when i was going to save an animation, go to file- save for web, this appears "the operation could not be completed".
View 3 Replies
View Related
Feb 17, 2013
a few days ago Photoshop disabled my 3D features with the new upgrade.my Macbook Pro has 4G of DDR3 RAM...what am I missing here?
View 2 Replies
View Related
Jun 18, 2013
OpenCL doesn't seem to work for me. I have it checked in prefs, have the latest drivers, and a GeForce GTX 660M. Yet when I run an iris blur filter, it's extremely slow, and only uses 1 CPU. Under System Info, it lists the video card and OpenCL 1.1.
View 24 Replies
View Related
Apr 16, 2013
I've just upgraded to Photoshop CS6, and did the update to v13.04. Get a message with Save for Web: "The operation could not be completed. A write permissions error has occurred." There is a bug fix for v12 for exactly this, but CS5.5 (not sure which version of 12 it was) worked fine on this machine. On a Macbook 17 inch running OSX 10.7.5 with 8gig Ram and 2.5 Ghz I7.
View 3 Replies
View Related
Sep 25, 2013
When I tried to add text it doesn't really work. For example: Let's say I type in "Whats your name?" It won't show I typed unless I go click on a different tab and then go back to it. And the question mark will be in the front instead of in the back. And if I try to erase it, it won't erase.
View 2 Replies
View Related
Apr 29, 2013
I have a copy of CS6 Extended and upon installation it is only the regular version of CS6. I do not know how to install the extended features,
View 5 Replies
View Related
Aug 28, 2012
I have a Geforce 8600M GT in my Macbookpro 10.6.8 2.2 GHz Intel Core 2 Core with 4GB 667 Mhz DDR2 SDRAM. I tried using it for 3D in PS6 but it doesn't seem to be 'enabled' and OpenGl unavailable. In the preferences in PS it states that graphics hardware unavailable and that I should upgrade my driver or card but on the adobe specifications for PS6 my card seems to comply and I can't find anything to update.
View 11 Replies
View Related
Nov 21, 2013
how to overcome the horribly sluggish load time for photoshop CC?That is, when the app loads, it takes at least a minute before I can load a file, most of the time 2-3 minutes.I am running a quad processor 2.4GHz computer/8G ram that's less than 6 months old. Seriously adobe... This is ridiculous.
It seems like all your content works similarly too. the "Creative Cloud" app is something of a joke. Takes 2 minutes to load, andother minute or 3 to show info, and when an app needs an update, well, jsut look out. You're in for a long wait while adobe chugs along at 1980s connection speeds. (I am on a 24 down 7 up connection, there's no excuse)
View 2 Replies
View Related
Mar 12, 2008
Suddenly the Alt key doesn't work with Clone and other Tools. When it's pressed, it shows a double arrow (black/white)cursor and a selection is not defined ...
View 10 Replies
View Related
Jun 19, 2005
I was working on a new file yesterday , and when I tried to switch to imageready it took too much time to do , but couldn't do So I saved the .psd file and then tried to directly open it in imageready cs2 then it said :
This file can't be directly edited in image ready ,switch to photoshop ?" and there was a button of switch !
So I thought maybe it's the file problem , So I opened a new document and tried to switch to imageready but the same problem ?
View 1 Replies
View Related
May 12, 2008
II am not able to start trial period of PS CS3, freshly downloaded and installed on clean Vista x64. It used to work but I reinstalled OS after SP1 and no success since. After clicking on 'I want to try for 30 days' I'm getting 'A problem was encountered while trying to load the trial period for Adobe Photoshop CS3'.
View 16 Replies
View Related
Mar 26, 2009
I am trying to run it from Bridge or from Photoshop. Photoshop stitches the images but when the process is done the document closes, resulting in no image.
Purging the selection / folder cache in Bridge prior to merging doesn't help.
Resetting the PS preferences solves the problem but only temporarily. The issue appears again when you try to make up another panorama.
I tried it on 4 RAW shots. Then on another set of 6 RAW shots.
SCRATCH DISK: 1 Tb
SYSTEM SPECS:
Operating System: Windows Vista 32-bit
Version: 6.0 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:4 with MMX, SSE Integer, SSE FP, SSE2
Physical processor count: 4
Logical processor count: 8
Processor speed: 2666 MHz
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 260/PCI/SSE2
Built-in memory: 3060 MB
Free memory: 1161 MB
Memory available to Photoshop: 1589 MB
Memory used by Photoshop: 70 %
View 16 Replies
View Related
Sep 19, 2012
Has any body else noticed that if you create a work path, then create a shape layer (say a rectangle) and type some text on the rectangle (text on a path) that if you commit the type and switch to the Path Selection Tool to edit the path text (position of the starting or end points) photoshop cs6 replaces your previous workpath with a workpath of the shape layer you typed on?
Is photoshop cs6 supposed to work that way?
Windows 8 x64 and photoshop 13.01 new document a create a workpath create a rectangle shape layer and type on the rectangle shape layer path. The orginal workpath has been replaced by the rectangle shape layer path
View 2 Replies
View Related
Jun 10, 2012
How do I make a work path of a character that consists of a loop (letters O, O, and P in LOOP for example) so that i get the inner and outer walls of a character, take O for example, instead of a solid O?
O (the black area of the O should be filled with smaller text, if it were a work path) When I create a work path of the letter O, it outlines both the inner and outer lines of the letter, but once the work path is created, all I get is a giant SOLID circle, not a work path that has inner and outer walls of the letter O.
View 6 Replies
View Related
Jul 6, 2004
Whenever I press this button, the tops and bottoms of my circular selections get cut off.
View 3 Replies
View Related
May 2, 2013
the last few days the gaussian blur plugin does not work in Adobe Photoshop CS3.
View 2 Replies
View Related
Nov 27, 2013
When I open an Image in Photoshop CC the image does not appear in my work space. The tab identifies that the image is opened, layers shows the image is open, however it is not on the screen. All tools, brushes etc work, but I can't see what they are doing. I can only see the image if i click the tab and move it around. Once my mouse lets go of the image window it dissapears again. After moving it around and such it gets buggy and the image crashes not Photoshop. i have attached two screen shots of my problem. the second with the image, i have my mouse clicked, held down holding onto the window to acheive this.
View 1 Replies
View Related
May 10, 2012
Have the latest Macbook Pro 17" with i7 processor, 8gm memory, all that stuff, running all updates on everything. I've run into a first for me. I updated the OS this evening to the newest update from 10.7.3 to 10.7.4.
Now Photoshop won't work. Gives the following on start up: "One or more files in the Adobe Application Support folder, necessary for running Photoshop, are missing. run the Photoshop installer and re-install Photoshop."
Used the whatever it is called downloader. After several hours and several attempts, it never finished and seemed to hang what I thought was near the end.So I chose to just do a straight download. After a couple of minutes, I have the Photoshop_12_1_LS1.dmg in my download folder. Moved it to the desktop. Tried to open. Gives me the following error: The following disk images couldn't be opened: Photoshop_12-1-LS1.dmg (reason) invalid checksum.
View 1 Replies
View Related
