I'm trying to use the gradient annotator on a compound path. Moving the sliders and rotating the annotator works fine, but if I double click a slider and change the color the annotator disappears and the color of the slider stays the same. It works fine on non compound paths.
View 7 RepliesAnd yes, I do have it "visible" by the menu item...is there a trick to getting this extremely handy thing to show up when it's needed?
View 6 Replies View RelatedI can't get the Gradient Annotator to show up. I select a shape w/a gradient, hit "G" nothing! I check under view and select "Show Gradient Annotator" nothing! I can use the gradient tool and pull a gradient and the annotator shows up during the action, but then dissappears when I'm done. Sometimes I can get it to show up if I back my view all the way out so I can see my entire artboard, but then when I zoomin closer it dissappears again. How can I get the Annotator to always show up when I use the tool. ( Mac-OS-10.8.5, Ai-CS 6)
View 5 Replies View RelatedWhy does the gradient annotator disappear when I drag it over an object. When I drag it it changes the gradient without giving me the chance to edit it. Just goes away. It used to work correctly but not now.
View 3 Replies View RelatedI am using ai Cs6. I have a circle that I filled with a linear gradient (I do not have stroke selected). I have my gradient filled graphic selected and turned on Show Gradient Annotator from the View menu. But, the annotator does not appear. What am I doing wrong or am I missing a step?
View 8 Replies View RelatedI am trying to alter the position of a gradient. I select the gradient path with the direct selection tool, then I hit alt+ ctrl+ g and nothing happens. When go to the view menu to turn on the gradient annotator, it shows that the gradient annotator is on. However there is nothing on my screen.
View 5 Replies View RelatedI have some negative space I created(black area, see first image) that I want to fill with type, not just a simple fill.
Basically I want to create the negative space from a bunch of small minus signs(-) that need to line up as they go across. If I type on each path one at a time as the text doesn't line up that way. This needs to be one continuous path. (see second image)
Unfortunately if I add them together, it creates a compound path, which you cannot type on, unless I am mistaken? So I need them to be a path, not a compound object.
Draw closed paths with the Pencil toolSelect the Pencil tool.Position the tool where you want the path to begin, and start dragging to draw a path.After you’ve begun dragging, hold down Alt (Windows) or Option (Mac OS). The Pencil tool displays a small circle (and, in InDesign, a solid eraser) to indicate that you’re creating a closed path.When the path is the size and shape you want, release the mouse button (but not the Alt or Option key). After the path closes, release the Alt or Option key.You don’t have to position the cursor over the starting point of the path in order to create a closed path; if you release the mouse button in some other location, the Pencil tool will close the shape by creating the shortest possible line back to the original point.it doesn't for me. after i start drawing and i hold the option key, it goes to drawing a straight line. i don't hold the key till after i start drawing lit says.
same thing with the connect two paths. holding the command key doesn't change the behavior of the pencil tool.i'm guessing there is no way of remapping the 'smooth tool' to option again? or was it moved to another hotkey?
I'm redrawing the Realtor Logo which is a simple square, and inside that are a rectangle, triangle and a semi-circle with a flat edge on the left. When combined, look like the letter R reversed out of a black box. When I select the all the elements and tell it to make a compound path, only the rectangle knocks out the background square and the semi circle and triangle just appear to be grouped with the square instead of knocked out!!! I've tried everything including moving the square to the front and the back, etc. How do you find out if the semi circle I drew is a closed path? I made the semi circle by drawing a circle and a square and then using pathfinder to edit them into a the left flat edged circle. The triangle I simply drew with the pen tool.
View 6 Replies View RelatedI'm trying to create a compound path in AI CS4 for Mac, but I have not been successful. What is best way to create a compound path using the SDK? I just need to make a compound path out of two non-overlapping rectangles so that I can create a clipping mask. Nothing tricky.
The SDK is not clear about the best way to go about creating a compound path, but I figured that programmitically selecting the two rectanlges and then using the built in "adobe_makeCompound" action would work, but it doesn't.
err = sAIActionManager->PlayActionEvent("adobe_makeCompound", kDialogNone, NULL);
When the above code is called while I'm debugging, I get a dialog box that reads: The object "Make Compound Path" is not currently available.
If I click the "Stop" button while debugging, the value of err is 1346458189 which is 'PARM'. So, maybe I need to set a parameter? The crazy thing is that there appears to be no parameters needed for the "adobe_makeCompound" action event. When I created the action manually, the resulting .aia file (see its contents below) has a parameterCount == 0. I've tried passing a parameter block without adding any parameters to it (instead of NULL), but still no joy.
/version 2
/name [ 5
5365742031
]
/isOpen 1
/actionCount 1
/action-1 {
[code]....
I am a complete novice with Illustrator. Ok now that we have that out of the way I have a logo that I had created for me that I would like to edit one small portion of. Basically in the middle of the logo is the word/text "EDCpen" (I believe the text is made up from compund paths).
I would like to edit it FROM "EDCpen" TO "EDCpin" however cannot get it to work. I am sure that I am doing everything wrong, however cannot seem to make this what I belive to be simple change.
Attached is a sample of the logo in jpg format. I have the file in both .ai and .eps formats.
I drew some simple paths in Photoshop with the pen tool, then exported the paths to Illustrator. All the paths came into illustrator as compound paths, though they look like simple paths in illustrator. Because they are compound paths, I can't join the ends of the paths to the ends of other paths.
Whe I select one of these paths:
Object>Compound Path>Release is greyed out and unavailable. "Release Compound Shape" in the Pathfinde palette menu is also greyed out and unavailable.
Is there any way to make these paths back into simple paths without redrawing them? I'm using CS6 versions of both Photoshop and Illustrator.
Cs6 here.... I am trying to cut out a simple shape to allow the area under the shape to be trasnparent or Alpha. Like a Mask. Except when I use the Mask it does at it should do and mask the area where the shape is and MASKING or removing the areas not under the mask. I tried Compound path but I am not getting any result from it. My shape stays right on top of my work and does not "cut it out" to allow the Background to shine through as an alpha channel. See pics for clarity. I want to reverse this where the circle is cut out and the rest stays visible...
View 11 Replies View RelatedI rarely want my Compound Paths to have voids where overlapping takes place, but sometimes (and it seems random) I get voids anyway.
The Attribute Panel options don't seem to do anything.
I am working on a file where there are kangaroos that are compound paths. I need to stroke only parts of them. Is there a way to do that? Should I just manually be drawing paths that go right up to the edge of the compund path (drawing my own stroke)?
View 9 Replies View RelatedI am trying to cut holes permanently out of an solid oblong and although I have made a compound path I need to make this permanent
View 5 Replies View RelatedI'm having trouble making adjustments to my compound path/shape, as I'd like to outline the inside of the shape with a stroke - but this doesn't seem possible as the stroke always surrounds the outside too.
So: I've got a simple rectangle with white fill, with a rectangle-window hole cut out of it using the compound path action so you can see the layers beneath. Now I want to stroke the window hole, but NOT the outside of the entire rectangle. I'd be happy to split the shape up and tried various options like divide, edit in isolation mode, expand (button is greyed out), all the pathfinders - but none of them allow me to do this only to the inside part of the path.
How I can perform this action? I'm working in CS5 and CS6.
This yellow donut is a compound path. I'd like to divide it into 10 segments, in the places where the black lines cross it.
View 5 Replies View RelatedI have this compound path (green in the print screens below) which I would like to apply a bevel effect on.
It seems as if the compound path is fine but when I apply the bevel effect, the result is as image 2. How can I solve this so that all of the beveled effect is smoothly and unite instead of rectangles popping out etc... ?
I'm working on a project and I need to use the free distort tool + ctrl (command for mac users) but it won't work. I found out that I need to convert it to a smart object, from another disscussion, but right clicking the name of it in the layers menu isn't working. I'm using CS6 by the way.
View 10 Replies View RelatedI'm trying to create a clipping mask of a photograph using several separate shapes and then separate the final masked image/shapes.
I've made the shapes a compound path, and then applied a clipping mask (so far so good).
Now that I have my masked photo/shapes I want to separate the shapes so I can edit them individually and independent of one another.
(using Illustrator CS4)
I'm trying to create a compound path in order to mask off some bits and create letters, but there seems to be some kind of overlap and its leaving a white line where there shouldn't be one. Its all set up to snap-to and both shapes are perfectly in line, but its still leaving this white border.
The top of each letter is basically just 2 semi circles, the diameter being where the white line is. the lines are still visible on low-res monitors...
how to get rid of this line or if it will even print?
I've created a logo with a grunge texture over the font in Illustrator CS5. When I try and create a compound path with the grunge texture I lose the detail. Here's one of the letter to show what it looks like before and after creating the compound path using the minus front pathfinder option. On the left is how I'd like it to look.
Although it doesn't look like much of a difference when printed it flattens out even more. I've tried every grouping option I could think of, used the pathfinder options and used this thread: [URL].... to try creating it using a transparency. Nothing gets the detail I need.
Is this something I can achieve?
I'm working on a script for my company that sets up templates for internal use. I've been able to get most of it completed by drawing basic pathItems and textFrames. The problem I face now is adding our company logo. In the scripting reference I've found examples of duplicating art from one document to another, but that isn't what I need here.
I've approached this by trying to select our company logo in an existing document and in some way capturing the pathPoints so I can use them in the the script that is setting up the templates.However I've not had much luck with this. Ideally everything will be self contained in the one script, so that external files aren't required.
I'm trying to set up a script that will grab a group of objects and turn them into a compound path, then apply a clipping mask to the compound path and the next group in the layer.
View 5 Replies View RelatedDoes the scissor tool NOT work on compound paths? I am guessing it does not being it does not work when I use it on them, but the Adobe help section didn't specify.
Also, sometimes when I am using the pen tool, I will place an anchor point but it shifts away from where I want to place it. For example, I will put it at x = 72 & y = 1000 and it will place it at x = 95 & y = 1050.
I thought maybe it was from something I accidentally selected like snap to grid or point, but changing the settings does not correct the issue. I have to close out of the program and restart to fix it.
Like in a Circle I need to make the compound path the inner area or negative space of my objects. I have expanded letters and joined their paths so that there are negative space, I was wondering if it were possible to fill in the negative space with a clipping mask? (like one would with an object like a circle or rectangle) The letter that I am using is an A and I have connected two A's together like a diamond reflecting each other... Is it possible to create a clipping mask to cover the negative space of the inside of the letters...?
View 6 Replies View RelatedUsing transform tool to rotate, often gradients do not rotate. In the example below only the "w" gradient did. Good news is the rotate tool works fine.
Appears this has something to do with compound paths, as this normally does not happen on a new single path. Releasing the compound also rotates the gradient unexpectedly.
I placed text on a shape and outlined it. As soon as I create a compound path, the result appears lighter than the originally outlined text (on screen and printed), although the paths seem to be identical when I overlay them. Same happens when I divide the paths.
View 21 Replies View RelatedI just upgraded to a new computer setup and installed Photoshop CC and well..... I can't figure out how to manipulate paths like in CS6.
On the left is a what path manipulation with anchor points looks like in CS6 on my old slow iMac, and on the right is the new CC with direction selection on, but instead I can't manipulate paths. How can I get it to work like CS6? Also, I know about the isolating layers thing, but that still doesn't let me manipulate certain anchor points.
why Command + . isn't allowed in CC as a hotkey?
Photoshop CS6 the " save for web" function to save on a network location. This network location isn't available to me at this time and now when I want to "save for web" I get an error like " can't perform the job, system can't find the submitted path" (which isn't the exact error but translated from the dutch error: "Kon de bewerking niet voltooien. Het Systeem kan het opgegeven pad niet vinden."
View 4 Replies View Related