Photoshop :: Cintiq Tablet Will Not Work Correctly With Windows?
Nov 5, 2012I am using photoshop CS6 on a 64 bit windows system and my Cintiq 12 will not function with the pressure sensitivity.
View 3 Replies
ADVERTISEMENT
Photoshop :: Wacom Cintiq 24HD / CS6 64bit (Windows 7 64bit) Brush Pressure Sensitivity Often Fails
Jul 11, 2012In Photoshop CS6 (64bit), when using the brush tool (with a brush with pressure sensitivity activated), I quite often get a line drawn at the max width selected, as if there was no pressure sensitivity. Everything goes back to normal after I start drawing another line, and happens again after a few lines. It's quite random.
I don't have this problem in any other software (Illustrator CS6 64bit, Painter XII, Sketchbook Pro, Zbrush, ...). I have already checked and I've found some other users on other forums with the same problem.
One example, with a picture of the problem: [URL] Another one, exact same problem: [URL] Some of those users seem to have solved their problem by installing an old driver (6.1.5r3), but they had that problem with Intuos TABLETS in the first place, not a Cintiq 24HD... I have tried that, but unfortunately the driver is not compatible with the Cintiq 24HD.
To test this out: I've been able to reproduce the problem 90% of the times I've tried. if I keep the pen at 1 inch from the display so that it's still recognized by the screen but it's not drawing, then wiggle it a bit, and then I slowly move to the screen and tap it (as if I was starting a line with very low pressure), the problem appears and it makes a large dot, as if there was no pressure sensitivity. As I said the test doesn't work every time, but almost.
This is an image of what happens when I try and make dots in Photoshop. These are done trying to push the pen with the same (low) pressure. The big ones are from when the issue appears: [URL]
I have tried the pressure test in the Wacom utility software and it seems to work fine, it never jump to full even when I try the method I've just described. In the diagnostic page of the Wacom utility software the pressure is always correct, even when in Photoshop there's the brush sensitivity issue.
note: I've already tried to completely re-install my computer + the Adobe software + the lastest wacom driver for my Cintiq 24HD, and the problem is still the same.
Photoshop :: CS6 / Genius Tablet Won't Work
Oct 20, 2012I recently downloaded the trial for CS6 Extended, after getting rid of CS2 (due to various computer issues, etc).
Anyway, my Genius tablet worked fine in Photoshop CS2, Paint Tool SAI, and Corel Painter, and it works in CS6 only as a cursor that can move around - but does not let me select anything, or draw/paint, etc.
Photoshop :: How To Take Work From Tablet On Laptop
Sep 26, 2013How do I take my work from my tablet to my labtop
View 1 Replies View RelatedPhotoshop :: Would Wacom Tablet (Pen And Touch) Work With CS5
Feb 18, 2012Would the Wacom tablet 'Pen and touch' work with CS5?
View 1 Replies View RelatedPhotoshop :: Selecting Clone Point Using Windows 8 Tablet
Jan 25, 2013Im thinking of getting a surface pro, I have been using a keyboard and mouse for years so use short cut keys a lot and will have to get used to using menus again. However I was wondering because a tablet has no alt key how could I select a clone point for the clone stamp?
View 1 Replies View RelatedPhotoshop :: Wacom Tablet Random Pen Pressure In CS6 With Windows 8.1?
Nov 20, 2013Ever since I upgraded Windows 8 to Windows 8.1 a few days ago, my pen pressure randomly changes to the default brush stroke in CS6 Extended. I am using a Wacom Intuous 5 Tablet with a wireless kit.
My pen pressure works perfectly fine in CS5, Paint Tool Sai, and Painter 12, but I am most comfortable with CS6 and really do not want to bounce between programs.
Reset my Photoshop Preferences using ctrl+shift+alt
Completely uninstalled and reinstalled the newest driver (Driver 6.3.7-5) as well as tried using older drivers.
Unistalled everything relating to Wacom on my computer and reinstalling.
Tried disabling Mouse settings through Device Manager.
Turned off/on Windows Ink.
Changed pen nibs.
Changed USB ports.
Removed My and All User Preferences using the Tablet Preference Utility
Turned off Flicks and changed Double Tap and Press and Hold settings.
I contacted Wacom and their response was:
"If the pressure sensitivity is just fine with the Tablet Diagnostics then you will need to contact Adobe."
About the only thing I have not done is unistalled/reinstalled CS6, which I am nervous to do because I no longer have my physical copy and as far as I can tell, it is only available to download through CC.
Photoshop :: Wacom Tablet Not Servicing Whole Screen (Windows 7)
Jan 3, 2012After making the move to Windows 7 a few months ago everything went fine regarding my tablet. Then a month later the driver died, i installed a newer version of the tablet for W7 and since then ive been having nightmares regarding the touch functionality of the tablet.
As of a week or two ago, the pen functionality has started dieing too. Im almost certain that what ever problems im having is not related to the tablet itself but my machine.When photoshop is not the active window, my pen can control the cursor to any position on the screen, however once photoshop is the active window, i can only control the upper left corner of the monitor. Ive tested it on a few apps and the same is happening on Fireworks, After Effects.
[URL] << shows the area in which i can move to
I'm running Windows 7 Ultimate 32bit.
I have the latest patch for Photoshop CS4 (11.0.1).
Have the latest patch for my tablet (5.2.1-6) - Bamboo Fun Pen & Touch.
Photoshop :: CC Tablet Bug / Keyboard Shortcuts Temporarily Won't Work
Nov 10, 2013I've noticed a strange bug with photoshop when working with a pen and tablet. I'm using the CC version on the latest Mac OS
While working on an illustration I'll frequently use keyboard shortcuts. command+z, i, r, z, option, etc. Someties after making a stroke with the brush tool, I'll go to undo with command+option+z and nothing will happen. Other keyboard shortcuts do the same thing—no response.
Photoshop :: Tablet Pen Doesn't Work Right With Dodge Tool
Oct 2, 2011get my pen (Wacom Intuos 2) to work properly with dodge tool like the mouse?It is the dodge effect was made by mouse..It is by the pen (same brush size)
The brush becomes too small and has a hardness effect, not smooth at all. If I size up the brush real large it's still not right (like in lower corner) and it's hard to control because I hardly see the brush movement. Pressing the pen tip on the tablet pen/mouse mode didn't.
Photoshop :: Can't Get Open Source Mac Bosto Tablet Driver To Work?
Mar 16, 2013I own an excellent Bosto 19mb tablet, which is a cintiq clone (but much cheaper) which alas only works for pc. You can see it here: [URL] However, I'm a good mac/iOS developer so I've written an open source driver for it. Source is here: [URL]...
It works really swetly with all but 2 applications:
Corel painter 12 and
Photoshop Cs5.1
I'm downloading a trial of CS6 as I write this but I imagine it will have the same problem.I have the bosto tablet monitor and my wacom tablet both plugged into my system (driver conflicts don't exist on mac). I also pretty well understand all the HID events etc, needed to make the driver work. I'm generating identical events to my wacom tablet, which is why I can't for the life of me figure out why i have problems with photoshop.
The problems are as follows:Photoshop CS5.1Holding the pen down and drawing does not draw a line, it will draw a dot, or a straight line from thepoint where the pen touched the tablet, to an approximation (looks like a mean) of the end point,In photoshop, in the brush dynamic settings, I get the "pressure not supported" icon. When my wacom pen generates an "enter" proximity event [that is, when I put it near the wacom tablet], the triangle dissapears,When my bosto pen (for which I'm writing the driver) enters [that is, when I put it near the bosto screen], the triangle appears again.
These are my questions:How on earth does wacom get photoshop to treat it as a pressure sensitive device?Is photoshop listening to different events,or are there undocumented transactions going on which allow the wacom tablet to work, but cause my one to draw dots or straight lines?Where can i go to for support on this issue?
GIMP :: Tablet Won't Work In 2.8?
May 24, 2012I just updated to GIMP 2.8, and my tablet -a digipro WP5540- does not work with GIMP unless it is in disabled mode under input devices. When "disabled", it works except with no pressure sensitivity. When "enabled", the tablet can be used to click on menu options and the brush will follow the tablet position at random intervals only when the cursor is not on the canvas.
View 1 Replies View RelatedPhotoshop :: CS6 Patch Tool Doesn't Work Correctly
Jun 1, 2012When I use Patch Tool in Normal mode, photoshop leaves a transparent mark on the replacement area.
System Info
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:10 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 1995 MHz
Built-in memory: 3067 MB
Free memory: 1758 MB
[code]...
Photoshop :: Shortcuts Of Character Panel Don't Work Correctly In CC
Jul 23, 2013I found that those shortcuts of the 'Character Panel' don't work correctly in Photoshop CC.
For example :
Press [cmd(ctrl)+ shift + >]→Increase or decrease the font-size with a step of 33.74px every time I press the shortcut.Previous version of Photoshop just changes the font-size with a step of 2px.
The same problem occurs while using the shortcuts to control tracking or leading etc... Obviously the 'step' is not correctly.This could be a critical problem for me.
Aonther problem is if you try to set the font-size to 100,it will say this 'A value between 0.01 pixel and 1296.00 Pixels is required.
Photoshop :: Add A Letter Or Number To A File Name Does Not Work Correctly
Jul 6, 2012The file naming scheme to add a letter or number to a file name does not work correctly.
Using the Save Image function in CR if I select a File Naming scheme of Document Name = Serrial Letter, I get a file that has a letter 'a' added to the end.
Subsequent saves maintain this 'a' and then add an underscore and an incrementing number. If I select a serial letter then the letter should be the only thing added and it should increment with subsequent saves.
What happens now:
Original file: IMG8102.CR2
First Save: IMG8102a.jpg
Second Save: IMG8102a_1.jpg
Third Save: IMG8102a_2.jpg
What should happen:
Original file: IMG8102.CR2
First Save: IMG8102a.jpg
Second Save: IMG8102b.jpg
Third Save: IMG8102c.jpg
Why would I get a number when I asked for a letter?
CorelCAD :: Weld Doesn't Seem To Work Correctly On Some ARC
Nov 17, 2013Weld doesn't seem to work correctly on some ARCs, though I don't quite know which ones yet. Here's an example - A left and right box created to allow two hemispheres to be made. Now try to "weld" them into a circle, and the program fails and delets both, replacing them with some rubbish.
This is most definitely a bug... It's very unusual behavior. Also, when ARCs are used in a welded shape, and it's extruded, it sometimes fails to make a solid. I found that two arcs with two polylines worked, but four arc and four polylines did not.
Also, if we're submitting bugs via Corel rather than directly with Graebert, is it possible to get a bug tracking list on the forum?
Update: Took this ( and others ) to Corel Support. They looked into it, and apparently weld doesn't do what the training videos say it does ( and it doesn't quite do what AutoCAD thinks either ) - but it's all moot.
To do this - Type PEDIT and then M for Multiple polylines. Select and convert them all, then JOIN. Works beautifully. So, if connecting lines, don't use WELD or JOIN - use PEDIT and convert to Polylines first.
InDesign :: Get Page Numbering To Work Correctly?
Mar 28, 2014How can I get page numbering to work correctly?
View 5 Replies View RelatedGIMP :: 2.8.2 Windows 7 64 Bit - Application Was Unable To Start Correctly
Aug 24, 2012I get file-tiff-save.exe & file-tiff-load.exe Application Error when opening Gimp 2.8.2 in windows 7 64-bit.The error: The application was unable to start correctly (0xc000007b).
View 5 Replies View RelatedMaya Modeling :: Keep Faces Together When Extruding Doesn't Work Correctly
Feb 2, 2012 I'm pretty sure that 'Keep faces together' when extruding does not work correctly in 2012. Well not on my mac anyhow. If you wish to replicate my problem here is my workflow-
Create cube poly > make some subdivisions> select some faces> extrude with 'keep faces together" unchecked> Select a face and use move tool, notice that faces will move apart as they should> Now select some more faces> extrude with 'keep faces together' checked this time> select a face and use move tool> notice how face is still separate as it SHOULD NOT be.
AutoCAD Civil 3D :: Does Line Work Need To Be Projected Before Uploading To WS To Use GPS Correctly
Dec 12, 2012I would like to bring in some of our linework into WS so it can be viewed on an iPad or smartphone with the GPS location referenced to the linework. Our dwg files projection is set for the NAD83 California Coordinate System, Zone 6, US survey feet.
Does the line work need to be projected before uploading to WS to use the GPS correctly? I understand there is also a units issue...but for some reason the location is never where it should be.
Illustrator :: CS6 - Copy / Paste To PowerPoint Doesn't Work Correctly
Feb 17, 2014This problem has never been in CS6, it is only in the CC. When I past an object from Illustrator CC to PowerPoint I see unexplaned code.
View 2 Replies View RelatedAutoCAD Civil 3D :: Modify Or Change Any Of Lisp To Work Correctly In 2014?
Jun 19, 2013If I had some custom lisp routes that I used with ACAD 2009, then 2012...do you think I would need to upgrade, modify or change any of the lisp to work correctly in 2014?
Could a custom lisp that I used in 2012, corrupt, effect performance, screw with other key commands (although with worked in the 2012 software) in 2014 if I didn't upgrade the 2012 lisp?
AutoCAD LT :: Hatch - Island Detect Doesn't Work Correctly When Used With Object Select
Mar 28, 2012I am trying to write a script that will automatically hatch several drawings. The drawings contain an area in which there are several objects that need to be hatched. For each drawing the objects vary in location within the one area.I figured I would set up my script to encompass the area with the object select hatch technique. This works fine if the objects in the area have no Islands. However when an object within the "object select hatch area" contains Islands it shades the whole object ignoring the Island or if it does recognize an island it will create an individual hatch for it.
However when I use the pick internal point method the hatch comes out as expected for the object with the Islands in it.
Illustrator :: Object Scaling Doesn't Seem To Work Correctly With Objects Containing Bezier Curves
Feb 21, 2014I created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)
Photoshop :: Does 6 (or Whole CS6) Work On Windows Xp
Jan 22, 2013Does Photoshop 6 (or whole CS6) work on Windows xp?
View 2 Replies View RelatedPhotoshop :: Does CS5 GPU Work Better Under Windows 7 Than Xp
Mar 5, 2012i noticed that photoshop cs5 video card gpu works better under windows 7 32bit then xp 32bit (gpu come off but i enabled and restart photoshop cs5) i did notice a better performance of xp sp3 then xp sp2, maybe i'm wrong
i used the same ati drivers by the way are there ati drivers that works better for photoshop cs5 then others?
Photoshop :: Does PS Work On Windows 8
Nov 8, 2012how Photoshop works in Windows 8?
View 12 Replies View RelatedPhotoshop :: Will Adobe CS6 Work On Windows 8
Aug 16, 2013I have lost my old computer will it crashed, which caused me to lose my CS5 software I had on windows 7. I need to buy the CS6 software for my laptop again but I'm not sure if I do if it will work on my new laptop which I had no choice, had to buy windows 8.
View 6 Replies View RelatedPhotoshop :: Way To Get Jurassic To Work On Windows 8?
Nov 25, 2012Way back in the Windows ME and XP days I had purchased PS 5 and then a PS 7 upgrade. This worked well on the various computers I used but now I have a new Win8 laptop and can't get it to recognize the PS 5 application (and thus cannot install the PS 7 either).
Is there a way to get my jurassic Photoshop to work on Win8? I can't afford to buy a CS and have become quite familiar with the PS7 so I'd hate to lose that too.
Photoshop Elements :: Will 9 Work With Windows 8 Pro
Dec 4, 2012Will PSE 9 work with Windows 8 pro?
View 1 Replies View RelatedPhotoshop Elements :: 6.0 Does Not Work With Windows 8?
Nov 7, 2012I recently updated my Notebook from Vista to Windows 8. Now I do have to install al programms again, but concerning PSE 6, there is a catastrophically failure with the licencing subsystem AMT. How I can use this programme again under Windows 8?
View 1 Replies View Related