Photoshop :: Can't Get Open Source Mac Bosto Tablet Driver To Work?
Mar 16, 2013
I own an excellent Bosto 19mb tablet, which is a cintiq clone (but much cheaper) which alas only works for pc. You can see it here: [URL] However, I'm a good mac/iOS developer so I've written an open source driver for it. Source is here: [URL]...
It works really swetly with all but 2 applications:
Corel painter 12 and
Photoshop Cs5.1
I'm downloading a trial of CS6 as I write this but I imagine it will have the same problem.I have the bosto tablet monitor and my wacom tablet both plugged into my system (driver conflicts don't exist on mac). I also pretty well understand all the HID events etc, needed to make the driver work. I'm generating identical events to my wacom tablet, which is why I can't for the life of me figure out why i have problems with photoshop.
The problems are as follows:Photoshop CS5.1Holding the pen down and drawing does not draw a line, it will draw a dot, or a straight line from thepoint where the pen touched the tablet, to an approximation (looks like a mean) of the end point,In photoshop, in the brush dynamic settings, I get the "pressure not supported" icon. When my wacom pen generates an "enter" proximity event [that is, when I put it near the wacom tablet], the triangle dissapears,When my bosto pen (for which I'm writing the driver) enters [that is, when I put it near the bosto screen], the triangle appears again.
These are my questions:How on earth does wacom get photoshop to treat it as a pressure sensitive device?Is photoshop listening to different events,or are there undocumented transactions going on which allow the wacom tablet to work, but cause my one to draw dots or straight lines?Where can i go to for support on this issue?
View 6 Replies
ADVERTISEMENT
Oct 10, 2012
So my PS CS4 had never lagged before, it was all running perfectly, all functions are going quickly. I was using the newest driver for wacom intuos 3, but with using a new driver, I had a weird pressure problem. It would only work with an older driver, so I uninstalled the newest driver and changed it into the older driver. But it won't work unless I trash photoshop prefernces (the ctrl alt shift thing) ...
Suddenly everything just turns laggy, although no pressure problem.. brush lag, text tool lag, everything, even moving the canvas window lags. I don't know how to return the old preferences, i tried increasing virtual memory from 4k to 6k mb, but no change. In performance tab I changed memory usage from 70% to 80% no change too.
I would like to try and change back to the newer wacom tablet, but i never found a solution to the newer driver pressure problem, everyone in some other forum suggested to trash photoshop preferences and change to older driver.. Ages ago, I did this in my computer, and it's running good, but recently I want to do it in my laptop, and it lags.
I'm using windows 7, 64bit.
RAM 8gb,
E and C drive are more than 100GB available.
photoshop version 11.0
openGL turned off (or on, no difference)
I tried uninstalling photoshop but no luck. I tried updating GeForce driver to the latest version, no luck too. (I'm using gtx 420m)
View 8 Replies
View Related
Sep 23, 2013
I get a LOT of Photoshop CC (64 or 32bit) mouse lag. I do NOT have a wacom tablet or driver (I've searched these forums for solutions). All the other Adobe products work fine.
View 4 Replies
View Related
Nov 24, 2013
How can I get a twain driver to work on PSE9 (mac)?
View 1 Replies
View Related
Sep 9, 2013
Things were working fine until I committed to the upgrade this morning, and then I got this message when I opened Ps CC:
View 31 Replies
View Related
Oct 20, 2012
I recently downloaded the trial for CS6 Extended, after getting rid of CS2 (due to various computer issues, etc).
Anyway, my Genius tablet worked fine in Photoshop CS2, Paint Tool SAI, and Corel Painter, and it works in CS6 only as a cursor that can move around - but does not let me select anything, or draw/paint, etc.
View 1 Replies
View Related
Sep 26, 2013
How do I take my work from my tablet to my labtop
View 1 Replies
View Related
Feb 18, 2012
Would the Wacom tablet 'Pen and touch' work with CS5?
View 1 Replies
View Related
Nov 13, 2002
I recently bought the 'Work' template from Outfront, complete with the Photoshop source files. I then acquired a copy of Photoshop and immediately wondered how I can modify the colours in the source files.
View 1 Replies
View Related
Nov 5, 2012
I am using photoshop CS6 on a 64 bit windows system and my Cintiq 12 will not function with the pressure sensitivity.
View 3 Replies
View Related
Nov 10, 2013
I've noticed a strange bug with photoshop when working with a pen and tablet. I'm using the CC version on the latest Mac OS
While working on an illustration I'll frequently use keyboard shortcuts. command+z, i, r, z, option, etc. Someties after making a stroke with the brush tool, I'll go to undo with command+option+z and nothing will happen. Other keyboard shortcuts do the same thing—no response.
View 4 Replies
View Related
Oct 2, 2011
get my pen (Wacom Intuos 2) to work properly with dodge tool like the mouse?It is the dodge effect was made by mouse..It is by the pen (same brush size)
The brush becomes too small and has a hardness effect, not smooth at all. If I size up the brush real large it's still not right (like in lower corner) and it's hard to control because I hardly see the brush movement. Pressing the pen tip on the tablet pen/mouse mode didn't.
View 2 Replies
View Related
Jul 1, 2012
I still use Photoshop CS2 and recently I downloaded the driver for my new Epson NX430 printer. Since then Photoshop won't open. I uninstalled the entire CS2 Suite and reinstalled. Photoshop still won't work though the rest of the programs do. I am using Mac OS X 10.4.11.
View 3 Replies
View Related
May 24, 2012
I just updated to GIMP 2.8, and my tablet -a digipro WP5540- does not work with GIMP unless it is in disabled mode under input devices. When "disabled", it works except with no pressure sensitivity. When "enabled", the tablet can be used to click on menu options and the brush will follow the tablet position at random intervals only when the cursor is not on the canvas.
View 1 Replies
View Related
Nov 18, 2013
Trying to print from LR 5.3 RC using .icc profile in printer settings in Epson Pro 3800 driver the Color Settings and Color drop downs are disabled???? In other applications these options are enabled and selectable.
View 3 Replies
View Related
May 21, 2013
How do I open the clone source panel in photoshop?
View 1 Replies
View Related
Jan 9, 2014
I have a vertically rectangular frame with internal frame elements at two separate levels based off offset work planes.
The lowest internal plane is offset up from the XZ plane and the highest internal plane is offset up from that lower plane. In hindsight I should have based that second plane also off of XZ, or off the height extents plane at the top of the rectangular box.
So that top third section of the box CAN be sized with a little math, but if I change the lower 2/3 of the rectangle it's going to want to follow that lowest internal plane (which I can tweak again to get what I want)...is there a way to just change the source of that higher internal planes source plane? Like switching it to XZ or the height extents?
View 6 Replies
View Related
Dec 9, 2013
I've never experienced this before, but perhaps that's beause I was never dependant on reading type in the videos I've previously produced.
how to keep the video quality of the source video when they insert it into the timeline?
View 8 Replies
View Related
Nov 30, 2010
My daughter has need of software to burn dvd's from her old digital tapes. She has an older copy of adobe premier and has the editing done. The tapes are probably d-avi? She is using windows xp prof'. Should i just buy her VS-x3 so she can use that burner that corel lets us download?
View 2 Replies
View Related
Jan 26, 2014
Normally when I edit, I use pluralize, which creates a sequence in which I can take notes. I usually then drag that sequence into my source monitor, create in and out point and place that into my final timeline. For some reason, Premiere is not letting me drag the file I need into the source monitor. Is there something with the settings off?
View 2 Replies
View Related
Jul 9, 2012
I opened 33 sources as "open as Sequence" behind each other and after doing that double clicking on the source or any source isn't loading it into the source viewer. There is no icon next to the source indicating that it isn't a source. After the fourth selection was open as Sequence. the one that was opened as the first is recycled and the Sequence Icon disappears from in-front of it. So there is only four icons at any given time in the list.
View 5 Replies
View Related
Nov 7, 2013
I need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.
View 3 Replies
View Related
Nov 10, 2013
1) Operating System: MAC 10.9 Mavericks
2) Photoshop Version: 5.1
3) Problem:* FILE>OPEN selection from the dropdown menu in the upper left Task Bar of the Graphical User Interface will not work.
- Problem Description:* Selecting FILE>OPEN presents an error box with the message "Could not complete your request because of a program error."
4) TroubleShooting:
- Fully reinstalled photoshop.
- Fully updated photoshop.
- Updated the computers version of Java (Java 7 Update 45).
- Adjusted the security settings for the operating system.
5) Misc Information
- I just purchased this Photoshop and registered with it a week ago.
View 2 Replies
View Related
Oct 26, 2004
Right click open with PS7 doesnt work. Every time i select it, it opens in windows picture viewer. But i can open it in illusttrator 4 some reason.
View 2 Replies
View Related
Oct 27, 2012
Lightrrom 4.2 can't use the right click, "edit in" photoshop CS6. I have tried edit, preferences, and created a Preset and pointed it to the CS6 photoshop.exe... still a no-go.
View 2 Replies
View Related
Nov 18, 2013
All of my images open way too small in the Photoshop active work window. (CS6) Is there a way to reduce the overall size of the active window?
View 1 Replies
View Related
Feb 20, 2013
Every Time I open C3D I have to open my drawings.
In addition I have always an empty and irritating empty "drawing1" ....
View 9 Replies
View Related
Mar 24, 2012
I have AutoCAD Architecture 2010. When I launch the program it opens up without any problems. But, when I go to the menu and select "File" then "Open" to open up my CAD files nothing happens. My screen just hangs and the ribbon turns a faint white color. I can't open any of my CAD files from the program. In order to stop CAD from hanging and doing nothing, I press the ESC key and everything is back to normal. I am wondering why CAD will not let me open any of my files from the menu.
View 1 Replies
View Related
Apr 27, 2010
the user is running C3D. He can only open a drawing if its in the previously open files list or he can open with Explorer. If he clicks the open toolbar or selects open from the menu or even types it at the command prompt, nothing happens. It seems to be trying to do something because the command prompt doesn't come back unless he escapes. If he instead hits enter, he gets a message that says it can't find the file specified - even though he never got a chance to specify anything. It's not FILEDIA and he has rebooted. It's also not hiding the open dialog box behind the acad screen.
View 9 Replies
View Related
Jun 20, 2012
I've just started a new job, and I'm on a PC with CS6. (I'm used to Mac, CS5)
I can't seem to get 'open recent file' to work in any of my CS6 programes It is always greyed out and never remembers what I've last done. Does it have something to do with the files being stored on a passworded server?
View 2 Replies
View Related
May 29, 2012
I just replaced a Windows XP computer & Photoshop lite 5.0 with Photoshop CS6 on a Windows 7 PC, but the TWAIN driver (64-bit) from the Canon website doesn't show up in Photoshop CS6. The CanoScan LiDE 500F scanner worked fine before, but how do I make it all work with Windows 7 and CS6?
View 4 Replies
View Related