3) Problem:* FILE>OPEN selection from the dropdown menu in the upper left Task Bar of the Graphical User Interface will not work.
- Problem Description:* Selecting FILE>OPEN presents an error box with the message "Could not complete your request because of a program error."
4) TroubleShooting:
- Fully reinstalled photoshop.
- Fully updated photoshop.
- Updated the computers version of Java (Java 7 Update 45).
- Adjusted the security settings for the operating system.
5) Misc Information
- I just purchased this Photoshop and registered with it a week ago.
I have AutoCAD Architecture 2010. When I launch the program it opens up without any problems. But, when I go to the menu and select "File" then "Open" to open up my CAD files nothing happens. My screen just hangs and the ribbon turns a faint white color. I can't open any of my CAD files from the program. In order to stop CAD from hanging and doing nothing, I press the ESC key and everything is back to normal. I am wondering why CAD will not let me open any of my files from the menu.
I've just started a new job, and I'm on a PC with CS6. (I'm used to Mac, CS5)
I can't seem to get 'open recent file' to work in any of my CS6 programes It is always greyed out and never remembers what I've last done. Does it have something to do with the files being stored on a passworded server?
I have a work set file which cannot open. A dialog box with 'Circular Chain of References' appears. When I expand the dialog box, the option to delete the errors are grayed out. They are issues to do with a floor plan, including a filled region and detail lines.
I have been working on this file everyday, so it's been saved and opened constantly, yet even the backed up files from over a week ago have the same error message. Even file which are detached from the central.
I made my plug-in for Autocad 2012.I register my plug-in in registry and so it's autoloaded.If I open Autocad I saw my toolbar, my message from IExtensionApplication.Initialize and all my commands (marked as [assembly: CommandClass) works fine. No problem.
BUT! If I open autocad file by double click - autocad opened. Now I saw my toolbar, saw my message from Initialize!But any commands didn't work. Autocad said that command is unknown. What can be a problem? My be in Autocad version? I have student version and startup message about it.
I have autocad civil 3d 2008 in my pc. From last 2 days I got a different problem i.e. when I am selecting open / save command from File menu graphical file select explorer is not opening just message in the command window . Previously I used to select files using graphical file explorer.
Lightrrom 4.2 can't use the right click, "edit in" photoshop CS6. I have tried edit, preferences, and created a Preset and pointed it to the CS6 photoshop.exe... still a no-go.
I own an excellent Bosto 19mb tablet, which is a cintiq clone (but much cheaper) which alas only works for pc. You can see it here: [URL] However, I'm a good mac/iOS developer so I've written an open source driver for it. Source is here: [URL]...
It works really swetly with all but 2 applications: Corel painter 12 and Photoshop Cs5.1
I'm downloading a trial of CS6 as I write this but I imagine it will have the same problem.I have the bosto tablet monitor and my wacom tablet both plugged into my system (driver conflicts don't exist on mac). I also pretty well understand all the HID events etc, needed to make the driver work. I'm generating identical events to my wacom tablet, which is why I can't for the life of me figure out why i have problems with photoshop.
The problems are as follows:Photoshop CS5.1Holding the pen down and drawing does not draw a line, it will draw a dot, or a straight line from thepoint where the pen touched the tablet, to an approximation (looks like a mean) of the end point,In photoshop, in the brush dynamic settings, I get the "pressure not supported" icon. When my wacom pen generates an "enter" proximity event [that is, when I put it near the wacom tablet], the triangle dissapears,When my bosto pen (for which I'm writing the driver) enters [that is, when I put it near the bosto screen], the triangle appears again.
These are my questions:How on earth does wacom get photoshop to treat it as a pressure sensitive device?Is photoshop listening to different events,or are there undocumented transactions going on which allow the wacom tablet to work, but cause my one to draw dots or straight lines?Where can i go to for support on this issue?
When I first installed Adobe Photoshop CS6 I was unable to run Photoshop or Bridge CS6. Photoshop would give me an error about "could not open a scratch file because the file is locked. If I ran either of these programs as an administrator they would run without issue, this led me to believe that there was a permission issue somewhere. After some digging I found out the both Bridge and Photoshop try to create a temp file (similiar to Photoshop Temp2777223910092) on the c: drive of the computer. In my case the user that I was logged in with did not have access to write to the root of the C: drive. Note that you run the program as the administrator and change the scratch disk location as that changes the preference for the administrator user and not the user that you are currently logged in as.
I first had to give the user that I was logged on with write permissions to the root of the C: drive. Next try and run Photoshop, you will get an error another error about the scratch disk and about and invalid or missing setting file. To correct this you need to have run Photoshop as an administrator, next you can go to Users AdminAppDataRoamingAdobeAdobe Photoshop CS6Adobe Photoshop CS6 Settings and copy Adobe Photoshop CS6 Prefs and/or Adobe Photoshop X64 CS6 Prefs to Users<your logged in username>AppDataRoamingAdobeAdobe Photoshop CS6.Adobe Photoshop CS6 Settings.
Everything I read says its version 6.4, but when I attempt to run the 6.4 patch I get the message that it does not apply? Has Adobe prevented PSE7 from opening .NEF files from the D5100 (without conversion) in an effort to force paid upgrades to the current PSE version?
I am trying to open a video to edit within Photoshop CS6 x64. I am getting the following message:-
Could not place the document ‘IMG_1664.MOV’ because no parser or file format can open the file.
The video was shot on my iphone 4S and ive even tried converting to other formats yet Photoshop still gives the same error. I have checked through Bridge and I have no option to send to Photoshop on the right click menu. try out the new features of CS6 for video editing.
I am running a 27" iMac with 12gb RAM and 1gb of Video RAM.
Getting this error when trying to use downloaded ACTIONS. "Could not place the document ‘Photoshop_Actions_03_by_ReehBR.atn’ because no parser or file format can open the file."
I am able to run CS6 when I login Admin, so i change scratch file location to D:. After restarting PC, login by Admin, I can run CS6. But I still can't run CS6 when I login by other account, I think the location of scratch file is per user setting.
my setup has 128gb ssd (C) which contains only my OS files with some junction points to Program Files/Program Files(x86)/ProgramData/Users which are located in my D drive which is a 1TB WD.
at first it showed when I tried to start PS for the first time after a clean install on a new computer I managed to get past it by runing PS as admin and changing the scratch disk to D.but now I noticed that when I try to copy a path from illustrator into photoshop as either a smart object or as pixels I get this error again. I haven't seen it again other then that but I just started using PS in this setup so I am yet to explore all the functions and whether they are working correctly or not.
when ran as an administrator the illustrator->PS transfer works fine but I don't want to run PS as admin all the time...
When I from Photoshop CS6 chose to open a file, or "Place" the browser window open, but I have to scroll all the way down in the "Enable:" drop down menu to chose "All Documents" or "All readable Documents" each time. And then if I want chose from the "Format" menu.
This is very time consuming, and I don't find any settings to make i.e. "All Documents" as default.
I have Photoshop CS3. it was working perfectly. Today both the File > New and File > Open do nothing. Dragging a photoshop file onto the program does not open it. Creating a new document brings up the dialogue but clicking ok does not create a new document. Nothing happens.
I'm working with both Photoshop and Illustrator CS6 on a mac. I'm creating a graphic. The background is a (cartoonish) mouth and I finished it a couple of days ago. (It's an Illustrator file.) I've been working on the letters to go inside of the mouth, (Once I'm finished it'll look as though they're being crushed.) I scanned and edited small wooden letters in Photoshop, and now I would like to work with them with the background in Illustrator. I understand how to open a Photoshop file in Illustrator, but I don't want to open the document as a separate Illustrator file. Is there a way to open a file from Photoshop as a second layer?
Some of the letters repeat as well. Will I have to create two files for this, or can I open the same file twice?
the user is running C3D. He can only open a drawing if its in the previously open files list or he can open with Explorer. If he clicks the open toolbar or selects open from the menu or even types it at the command prompt, nothing happens. It seems to be trying to do something because the command prompt doesn't come back unless he escapes. If he instead hits enter, he gets a message that says it can't find the file specified - even though he never got a chance to specify anything. It's not FILEDIA and he has rebooted. It's also not hiding the open dialog box behind the acad screen.
For simple files, the 3d widget appears when I convert an object to a Postcard and responds to my use of it. For some of my complex multi-layer files, the widget shows up but does not respond to my mouse clicks. I can manipulate the object using the 3d navigation tools, but the widget is useless.I'm having problems with a 170 MB file with no other apps running other than Photoshop.
I'm on a Mac 2.66 GHz PowerBook with 8GB of RAM running OSX 10.8.5.
why am i not able to open solid work files? The files were made in 2008 in solid work. I ma trying to open them in 2011 INV. I am also checking the box as showing the attachment.
There is a option to open solid work *asm* files. why it is not working?
Why can't I open my images in iPhoto to import photos to work with? I tried dragging them in, and I tried opening my iPhoto from the Gimp importer window, nothing seems to work.
(I use Macromedia Freehand MX), I just recently download the trial illustrator, and my question is to know how to open points in Illustrator images for screen printing in freehand using the Halftone in Illustrator I've tried but is not the same as the finish is different and of very poor quality here is a sample as freehand and illustrator as stated in:
Look at the difference of points:
As you can see in Illustrator can only do that from the menu: Effects / Pixelate / Color Halftone... , not sharp as seen in the picture above and therefore the image does not get to see very well, while in freehand if you can manipulate the points from large fine to a point, points also can be made round, linear or ellipse and therefore may work better for screenprints and other designs that open nesecitan points at home. What I'm interested to know if there is another way to work so that the image is sharp with the open items as well as in freehand.
I have an open file - we'll call it the 1st file. I will add a background and some other images to it that are located in other psd files. But how? How do I get them in there?
I want to add 2 images, (don't worry about getting into selection and pixels, shadows, edges, etc. the complex stuff is easy LOL) Anyhow, I have another file that I open. How do I get that entire image(or file) into the 1st file - into it's own layer - so I can edit, position, and transform it etc. as I need.
make sense?
What if there's a 3rd image/file that I want to open and add to yet another layer.
Do I simply select the entire image and copy/paste it? I tried dragging it, knowing that would probably be futile. Anyhow, any and ALL advice on this surely simple procedure would be appreciated.
There are some files with at least 8 files that I want to bring together into one image. Same thing, do I cut and paste them, or is there another way?
All of these are psd files, btw. Would it make a difference if one was different, say a jpeg or tiff etc.
