Tiff files flipping on both horizontal and vertical when importing? Client gave me a Corel PDF from an originally imported Tiff image and it's done it. Perhaps something when importing?
I can bring it in ok in CD v5.
Alright, I made a custom bookshelf to fit under my stairs, however, when I created them, I made them on a horizontal plane, so when I loaded into my project, my book shelf is laying down in the middle of the living room floor, which was fun at first, but nearly an hour later I am not so amused. Is there a way to flip it vertically or do I have to remake the whole bookshelf?
View 4 Replies View RelatedThe problem is that when I choose or designate an outline thickness, the horizontal is much thicker than the vertical. I need consistency. Especially noticeable if I modify a font, enlarge it, stretch or skew. I do set the outline to scale with image and also don't outline until I am finished with the modifications.
View 2 Replies View Relatedis it me being picky or expecting too much. How come this useful feature of horizontal & vertical scaling of paragraph text fonts still haven't been implemented as of CorelDraw 14? All the other illustration packages support this feature and Corel just never seem to care about it.
View 6 Replies View RelatedI'm doing a walk cycle. and I have 2 feet. I have to manually switch in the numbers that result in a graph that is basically identical but with a horizontal and vertical flip.
instead of manually typing in the numbers I'd like to copy one set of keys and paste it onto the second foot. I know I can get a vertical flip by doing *=-1 but is there a way to get a horizontal flip also?
if I create a new document, say A4, and then import a TIFF photo to that document, the photo appears much larger than my background A4 document. So, do I edit my photo and then export it as a TIFF again, or should I resize my background document from A4 to match the size of my photo before exporting? What I'm asking is that I don't want to lose the original size of my TIFF image, so when I export my image will CD save the TIFF image in it's original size or resize it to that of my created A4 document?
View 1 Replies View Relatedi took a picture horizontally, is there any way to change so that it is vertical?
View 6 Replies View Relatedwhen I am trying to extract an element of an image from a larger image (using a layer mask) come across straight sections - but at an angle - at this point it would be nice to be able to put a "ruler" across that section and brush against it for a nice clean line. I tried creating a marquee and using the boundary box to position it - but when I rotate the marquee it wants to take that bit of the image with it...
View 2 Replies View RelatedIn CS6 when I crop, the crop would automatically be vertical on a vertical pic, and horizontal on a horizontal pic. The new CS7 (Photoshop CC) doesn't do that.
View 2 Replies View RelatedI have downloaded photos from an Iphone 4s to my desktop computer. The photos are horizontal and when I rotate them to vertical and try to save them I get the message " could not complete your request because of a program error". I have no problem doing this with photos from my Canon camera.
View 11 Replies View Relatedcurious if there's any way to keep guides vertical / horizontal when using the rotate view feature?
View 11 Replies View RelatedWorking on a photoshop image. Horizontal and vertical banding occurs in thin lines of solid colors randomly within the image.
They can be repainted out, but with any zoom or tool action more seem to appear.
They exist even after saving and restarting.
Windows XP 64 bit $GB Ram
Is there a way in actions or scrip to size a folder of different size horizontal and vertical images at the same time so that the longer edge ( h or V ) is equal - ie - horiz long side 2", shortside whatever on Horizontal - Vert long side 2", shortside whatever on vertical ? at present I am separating H & V and using two different actions .
View 1 Replies View Relatedcan make the photoshop tools pallet horizontal instead of vertical?
View 3 Replies View RelatedHow can i get horizontal mullions to cut through vertical instead or reverse?
View 2 Replies View RelatedI would like to know how to draw this pipe as shown in this picture below. Draw a 3d pipe with horizontal curve and vertical curve elements combined. Here are the design elements
for the horizontal curve for the vertical curve
radius=30.798m radius=18.000m
angle=29deg angle=60deg
The diameter of pipe that i am trying to draw is 5 meters.
3d pipe.jpg
So I have been adding in some text over a .jpeg image. Then I am making them into a .dwg file. I have running into a lot of issues with the text though. In the .ai file the text is all horizontal. When I export it however the text turns vertical. I am looking at the file in Autodesk Truview 2014. Just wondering if this is a bug or there is some way to avoid this. I am also using Adobe CS2.
View 1 Replies View RelatedI find myself digging this option from the transform pane all the time, is there a way to assign a shortcut for this simple operation?
I can't get a hang of the Reflect-tool for some reason, it's quite clumsy.
in lightroom can i change the pic from horizontal to a vertical pic?
View 2 Replies View RelatedHow do I switch the text from vertical to horizontal
View 7 Replies View RelatedI'm using Draw X5 to make a diagram using lines, circles, etc. When I try to export this to .tiff, the resulting images are very blurry and unusable. I'm using 300dpi without compression. I've tried with and without anti-aliasing. I can export the exact same thing to .jpg or .gif and they look perfect. Unfortunately I'm submitting this for publication and they require 300dpi .tiff files as the format.
View 6 Replies View Relatedhow you would batch resize a ton of photos to 50 % of its original size.The workflow I've had before is going trough image processor and doing the resizing when I'm converting to .jpeg. The only problem with image processor is that the resizing doesn't seem to be smart enough to differenciate horizontal with vertical.
So say I choose a specific resolution of 2880 x 1920p all my horizontal pictures are great, but the vertical ones turn out at 1280 x 1920p.
So how do I batch resize in a way that photoshop would know to turn horizontal pictures to 2880 x 1920p and vertical ones to 1920 x 2880p?
i am looking for a command that will let me take a scan of something and say "make vertical" and have PS prompt me for two pickpoints with the second pickpoint being directly above (i.e. vertical) the other. alternatively i would like to have a way to "make horizontal" and pick two points that i want oriented in a horizontal line to each other.
right now the way i do this is to rotate clockwise or counterclockwise by 90 degrees, then rotate by some arbitrary amount like 3 degrees, and then to do a series of 0.25 degree rotations - as i check by running a rectangular border top to bottom (or right to left) against something in the image until it is almost correctly oriented.
In 2013, just placed a view in an idw. Now I need it rotated 90°. In pre2012, there was a rotate Horizontal and Rotate vertical command where we could pick the edge and it would align to it.
Has that been taken out of 2013 or am I just overlooking it? Restarted Inventor and that didnt work. I did not restore the marking menu because I have some customizations that I dont want to lose.
For what its worth, Wiki help shows the "Rotate View" command in the video..... maybe I don't have the full version...IDK. Looks like I am missing several commands here, like Apply Design View.
I have build a solid in which the projection of the hole on the face of the cube is an ellipse. However, as I did not create the ellipses on the faces, but the ellipses are just the result of the projection of an empty egg inside an extruded rectangle on the faces of the extruded rectangle. How can I see the dimensions of the ellipses? I tried to use the measure distance command, but with no success.
I´m attaching the model file.
I am trying to figure out how to take a vertical photo and merge it into a black horizontal background in Photoshop CS4. I have to upload a vertical photo to a website that will stretch the photo to be horizontal if I don't do something like this.
View 3 Replies View RelatedThe building plan has been drawn according to North, etc. When I try and draw a rectangle, for example, the rectangle is angled according to North and not vertical and horizontal in the MS.
How do I turn this off. I tried changing VPORT to 0,0 and it rotated the whole drawing with North at the top.
Is there a way to draw a perfectly vertical or horizontal line in Xara (Designer Pro 6) without manually lining it up with the grid? Sometimes I just need an instant horizontal or vertical line and I find I have to turn on the grid, zoom right in and meticulously place the pen tool so that the line is a perfect vertical (90 degrees) or horizontal (180 degrees) without slant or lean. Surely there�s a quicker and more reliable method?
View 8 Replies View RelatedCan I have use both the horizontal and vertical secton tail in the same project? When I change the tail in one system family it changes the tails on all the types.
View 1 Replies View RelatedI am having a problem with the vertical and horizontal constraint shortcuts. If I were to select a line and constrain it vertically the line becomes horizontal and vice versa.
View 2 Replies View RelatedI need to stretch a drawing so the horizontal scale is different from the vertical. The stretch command does not seem to work for this and scale only seems to allow a change in both axes.
View 7 Replies View Related
