AutoCAD Map 3D :: Scaling Viewport For Engineering Plots
Oct 19, 2011
Looking for a tutorial or some input on how to get my civil engineering (water design) drawings to plot at a 1" = 40' scale (or some other variable of the 1" = xx feet setup). Running AutoCAD Map 3D 2011...and the .DWT files we have in our library USED to show a scale list that included all these engineering scale settings. Where can i learn about the variables/settings/unit settings/scale lists i need to have in my templates to be able to plot at these scales?
View 1 Replies
ADVERTISEMENT
Sep 12, 2012
I've been runing LT 2013 for the past couple of months, everything was working fine until recently. Occasionally a viewport will go completely black. I can doule-click into model space and select objects, though I can't really see them. If I delete the viewport and make a new one, the new one works fine (at least for now).
View 4 Replies
View Related
Oct 8, 2013
why the drawing plots results using the viewport scale in the layout is not accurate?
View 1 Replies
View Related
Feb 9, 2012
In 2008, never had this issue.Just dumb, circles, and lines in a view port, that have hidden or center linetyoes assigned to them. When we go to plot using legacy hidden (this new for 2012?) the plot comes out with continuous lines. These are not solids. Just ordinary line entities.Now, when I change the shadeplot to "hidden" the linetype is shown correctly, but now my entities are coloured, when I just want my drawing to be black and white (going to PDF), even though all of the colours in the pen style are set to "Black".
Has this changed? Is there a new variable introduced?
View 3 Replies
View Related
Jul 11, 2012
I'm pretty new to AutoCAD, I've been self-teaching myself for about a month so that I can do some floor plan drawings for a company I work for.I've been drawing in 1:1 scale in model space, but when I plot/print to check my work, I print on A4 paper.
My question is, on A4 paper my 1 drawing unit : 1 mm scale plots perfectly. But obviously if I were to compare that scale to real life, it would not be 1:1. How do I figure out the scaling on the viewport to compare to real life?
View 9 Replies
View Related
Nov 9, 2011
We have recently been upgraded to Autodesk Map 3D where I work which when we first got it was a big improvement from what we were running. When I first started using the programme I found the lovely little box in the bottom right hand corner where you can change the view scale.
This allowed me, when in paper space, to double click in a viewport then click the drop down arrow next to the Viewscale box, select custom and then type in the scale I wanted (i.e. if 1:200 I typed 200 then hit ok).
However all of a sudden I am no longer able to do this. When I press ok, nothing changes. There are no error messages or any message. It appears to disregard the command. There is also a closed padlock next to this which when hovered over gives the discription "click to link/unlink AutoCAD Map 3D stylisation while zooming". I am unable to unlock this by clicking on it, the padlock seems protected almost so I am wondering if this is my problem?
View 4 Replies
View Related
Sep 24, 2013
Trying to scale a viewport in AutoCAD 2010, and ran into this error "Error: AutoCAD variable setting rejected: "cvport" 3". I've scaled viewports all the time, and this is the first time I've ran into this issue.
View 1 Replies
View Related
Jun 23, 2011
Dim style is set to scale dims to match vp but when I layout a dimension it is not correct. I ran the "dimreassociate" command and that fixes it but only on the dim that I fix/selected. What am I missing? This is an existing legacy drawing so there must be some setting that has been changed.
View 4 Replies
View Related
Apr 23, 2012
I have about 10 instrumentation enlarged plans that are drawing in model space and all the equipment text and instrument bubbles and blocks are in paper space.
All of the drawings are at 1/4" but they are getting loaded down with too much info, so we are cutting each of them into twenty drawings instead of ten. While I can change the view port very easily and scale it up accordingly, after I do that I will have to re arrange the text and blocks. I'm looking for a way to scale the blocks and text in a way to where it will change the location of the text and blocks, without actually changing the size. So I bring the drawings up from 1/4" = 1'-0" to 1/2" = 1'-0". If I scale all of the blocks up by 2, it will put them in the right location, but all of the text and blocks will be too large. I could select them all and change their scale down in the property palette, but I would still have to trim down all of the leader lines going from the instruments to their bubbles.
Long story short, is there a way to scale a block or text from a basepoint to where if you scale it, it will change it's location, but not the scale of the block or text?
View 7 Replies
View Related
Jan 19, 2013
I have made a landscape model in meters as units in the modeling area. Now, when I want to scale the drawing in the paper layouts, within the viewport, it seems to me like it's scaling as if the drawing was done with millimeters as units.
I think this might have been caused by me starting to draw, thinking I was plotting in with meters as the unit, but then found that it was set as millimeters. I changed the unit setting for the model to meters and that seemed to work fine. But I'm guessing it didn't work.
I have tried using the INSUNIT command and it says the drawing is in 6, which is meters, so why is it scaling as if it was in millimeters on an A3 layout?
View 8 Replies
View Related
Apr 3, 2011
What i have is a low polymodel that's quite small in scale, i'm modelling around a higher poly model, when i zoom in, the viewport clipping kicks in and parts of the model disappear, so i cant work on the small details. What i need to do is scale up both my low poly and high poly, work on the small details and scale it back down.
In maya there are multiple solutions to this; The first and most obvious would be to increase the near clip in the camera attributes.
The second would be to freeze transformations on the low and high poly, scale up the model, work on it and then scale it back to the value of 1.
The third would be to put both the low and high poly models into a group, scale up the group, work on the model, return the group back to its default size and ungrouping. Personally i would use this method to preserve the original scale values on the low and high poly models.
Is there a way of doing any of the above in 3ds max?
View 2 Replies
View Related
Feb 21, 2011
I then change to my A0 template on a different tab in the same drawing, size up the model in model space within the viewport (everything still fine), then as soon as I scale the model to 1:200 the icons I've added to the drawing (I say icon it's one particular group of icons - CCTV camera icons I've made and added) suddenly become massive and three times the size.
If I add them when already at 1:200 they're fine but it only seems to do this when I actually scale the drawing.
View 6 Replies
View Related
Apr 5, 2013
How to put their engineering seal into an autocad dwg? Would you just scan it in to pdf, then I'm not sure how to import it over.
View 2 Replies
View Related
Nov 4, 2012
I have a problem with aligning the model. At the beginning I could not see drawings in correct position after putting them from assembly window to drawing one( please see the screenshot). I solved it in the drawing mode( I set them straight so I can do engineering drawings), but I am wondering if there is a possibility to set any object in assembly mode horizontally vertically so in the drawing mode it will not show incorrectly after adding them. Also I made a drawing file for Auto Cad mechanical and parts are also set tilted.
View 3 Replies
View Related
Aug 22, 2012
I am now using Civil 3D 2013. In previous versions, SCALELISTEDIT, then Reset would give me Civil Scales. Now when I use the same command and reset, then choose Imperial Scales, it resets scales to only Architectural. I tried to make a change using_AECDWGSCALESETUP. The dwg units are already in Feet and the Type is set to decimal. How do I get back to engineering scales?
View 3 Replies
View Related
Sep 24, 2012
We create a greate deal of DLL add ins for Inventor using Microsoft VB.NET. The code security is very important to us. I hear certain program such " Lutz Roeder's Reflector " can reverse engineer the DLL assemblies and get the actual code from it. This would cause concern when we deploy the DLL to various users.
So, is it true that DLL from VB.NET (or C# and C++) is so vulnerable from reverse engineering? if yes, what is any practice to add security to it?
View 4 Replies
View Related
Feb 9, 2012
I have created Engineering Notes in Part and same visible in all top level assemblies (see attached image).
I searched on web for option and it is available underAplication Option>Note Tab, but I could not able to locate option in Inventor.
Inventor: Autodesk Inventor Professional 2011
View 1 Replies
View Related
Jan 28, 2013
knew any structural engineering software that can easily import AutoCAD solids and turn them into a mesh to perform a finite element analysis on them.
I have used SAP2000 and it is a little bit of pain to make complicated non-linear forms as a mesh in AutoCAD and then export them to SAP2000. (I do not believe there is a solid to mesh command in autocad yet, if so that would be very nice).
View 1 Replies
View Related
Aug 18, 2012
Is there any program to automatically calculate the amounts of beams, columns or elements of engineering in autocad?
View 2 Replies
View Related
Feb 24, 2012
In the engineering notebook, I have sectioned the assembly so that I can show what I need to note. I would like to freeze the view. When I freeze the view, the section goes away and I cant see what I need to.
View 4 Replies
View Related
May 23, 2012
Working in a assembly and just edited an existing note in the Engineering notebook. Clicked the "X" to close the assembly.... what? no prompt to save the file?
Just checked adding a note to a ipt and it doesn't dirty the file either, so if you only add a new engineering note, you have to save it, cause it won't prompt you before closing.
View 1 Replies
View Related
Oct 27, 2011
In my part, there was already an existing Engineering note.
I wanted to add another note. I added my new note, but it does not show up in the browser. I can right click on the note note > Display note and both notes are shown in the engineering notebook. When I exit out of the notebook and go back to Inventor, still not there. Here is a short video of what I am seeing.
[URL]. The "Rev B" noteis the original one and Note 2 is the one that I just added.
Now I if I add another note, then all of them will show up in the browser. This is not the first time that I have seen this, but just thought I would bring this up.
This part was just made with a copy design from Vault. What is weird, is that if I go to the part that this was copied from and add the note, it shows up correctly then. Its like something is getting hosed in the copy design process.
View 2 Replies
View Related
Feb 21, 2014
New Responsive Scaling feature is great.
It's enabled me to add an Edge Animate file to my responsive Wordpress site using the Edge Suite Plugin.
Only problem for me is that although the 3.7MB file I’ve created scales perfectly on all devices it struggles to play on smartphones. (I assume it's too big and too power hungry to play smoothly on smartphones - even since I've added a pre-loader.)
So, in an ideal world, what I need is a separate low res Edge Animate file that only plays on smartphones.
Failing that, I’d be happy with a 'Down-level Stage' image which could replace the Edge Animate animation.
For a moment I thought I’d found a solution when I came across this Adobe TV movie: [URL]
Unfortunately this clever solution only works when the new Responsive Scaling feature is NOT selected. As soon as it is selected, the animation no longer changes from one layout size to another when the browser window is reduced.
I don’t mind whether the fix is in Edge Animate, Wordpress or the Edge Suite Plugin - I just want a solution!
View 3 Replies
View Related
May 23, 2012
We have two drafting assistants using LT 2010, with Windows XP. One is assigned to do record plotting, and uses our company standard .ctb file without any problems.
The second LT 2010 user has now been assigned to assist with record plotting. However, lineweights are plotting out about half the width of the specified .ctb file. We have double-checked all the ACAD LT & Windows plot settings, and they are identical for both drafting assistants.
Is there a system variable or other setting that I am missing?
Inventor RS 2011
AutoCAD Mechanical 2011
ASD 2013
Vault Collaboration 2011
Windows 7 Pro
View 3 Replies
View Related
Feb 8, 2008
The plots will not fit on the desired page correctly at large scale i.e sheets over A3 ! The preview even displays incorrectly i.e portrait only. All I want to do is print a dwg in landscape but it keep only printing half the page (The white sheet is always portrait) but the information is landscape !
View 9 Replies
View Related
Nov 14, 2013
I have an issue with ACAD 2010 where I import jpg shots into the drawing - often a google sketch up wireframe lightened image underneath my drawing - but when I go to plot a pdf, it shows in the print preview, but when the plot is completed, the sketchup image is not shown.
View 3 Replies
View Related
Mar 16, 2012
I want to add a sort of legend / information box to my drawings, in a manner where it can remain constant and in the same place every time I print but I can edit the information therein. I guess that means making up a template, but I'm stuck beyond that.
Having robbed this picture from the Google image search:
I want to make that table at the top. Maybe add a company logo, the title, scale, author, etc. I'm sure you know the score. But I was hoping I could do it in such a way where I've only got to draw it once and all future drawings I can simply edit the specifics and add it to all drawings, regardless of size or scale.
I normally draw things with a pencil and drawing board and believe me during this learning process there have already been too many times where I'm tempted to go back!
View 6 Replies
View Related
Nov 27, 2012
I am having trouble getting a DXF underlay to plot clearly and boldly. I insert the ref to the dxf, then, in paperspace, create viewport, etc. I plot all files to pdf (seperate install) for record purposes. When plotting this file, the dxf is very faint--even though the preview is very bold and dark.
View 4 Replies
View Related
May 24, 2012
I have a client that is requesting a high resolution pdf for the purpose of sending to a graphic specialist to be made into a sign for a subdivision.
i am using civil 3d 2012 on windows 7, 64 bit.
using pdf995 and/or dwg to pdf as my driver, the only way i can get it to deliver a high-res graphic file is to have it produce an extremely tiny area, which, when blown up to the 4' x 8' size for the sign, gets even worse than the 72 dpi it gave me in the first place. Where i can get a driver to have autoCAD print a drawing to pdf at higher resolutions? Or, how to get autoCAD's default pdf creator to produce higher res?
View 2 Replies
View Related
May 23, 2011
I have a phantom line showing up when I plot this particular drawing. When I plot this drawing, do a preview or plot to a pdf, I'm getting a phantom diagonal line going across the drawing. There is no object there in model space or paper space!!! I havn't left on any hidden/locked layers etc. I'm not doing anything I don't normally do with drawings like this. It's just a topographic map of a residence with a surface. I've purged, audited, recovered, even started a new drawing and inserted the componets and nothing fixes this. I feel like throwing my computer out the window and applying at Wal-mart.
View 7 Replies
View Related
Oct 16, 2012
When plotting any IDW files to our full size plotter, I have ghost lines running through the drawing (lines that are not present in the drawing, on screen or preview) alomost like the plotter is printing extra extension lines on the drawings, overlaying 2 sheets on 1 drawings and even moving some text on the drawings. I have all the SP's and am lost. I can move to another computer and print drawings fine so its not a plotter issue.
View 2 Replies
View Related
