AutoCAD Civil 3D :: Phantom Line Showing Up In Plots?
May 23, 2011
I have a phantom line showing up when I plot this particular drawing. When I plot this drawing, do a preview or plot to a pdf, I'm getting a phantom diagonal line going across the drawing. There is no object there in model space or paper space!!! I havn't left on any hidden/locked layers etc. I'm not doing anything I don't normally do with drawings like this. It's just a topographic map of a residence with a surface. I've purged, audited, recovered, even started a new drawing and inserted the componets and nothing fixes this. I feel like throwing my computer out the window and applying at Wal-mart.
I'm having a problem with "phantom" lines appearing in PDF plots.
The Situation:
The firm I work for often uses Excel tables in Autocad LT 2013. I have learned through experience its better to use a linked table, but in this situation only paste special is an option due to time constraints.
Basically when we try to plot a DWG with tables specially pasted in the drawing space phantom lines appear.
But only when we try to convert to PDF. In the plot preview everything is fine, but when the PDF is created vertical lines appear in the tables on the actual PDF.
I've tried many different options to fix this but so far the only thing that has worked is, converting the DWG to a DWF and opening in Design Review. From there I plot to PDF and everything is fine, no lines appear.
In the DWG I have tried tweaking the Plot Quality for the "pasted" tables to no avail.
At one time I managed to divine a way of showing parts in an assembly drawing in phantom. This is characterized by the icon for the part in the browser changing to green colour. Being elderly, I have forgotten how I managed to do this.
Since switching to 2007 our company logo, a png image, plots with a line down the right side the image. It does not show up in plot preview or when plotting to pdf or dwf. I have set image frame to 0 and 2 with no change.
It's just supposed to be a plain black logo, which I've extracted from an image and smoothed/sharpened the edges (they were very rough even before the extraction process). But somehow I've introduced this faint ghost line about 1mm in from the edges of the logo, and I can't get rid of them even if I draw over the entire logo with jet black.
The ghost line becomes most apparent when I anchor the transparency to a white background. Here is zoomed segment of the logo demonstrating the issue:
There is none of this effect on my original full size transparency. It must happen during during the smooth process. Process I used:
- Alpha to selection - Shrink by a few mm - invert - gaussian blur - colour->curves-> and resharpen smoothed/blurred edges using the 'alpha' graph
Whenever two shapes are stacked directly over top of one another there seems to be a phantom line at the edge of the top shape. At first i thought it was a way to indicate to the user that there are two shapes stack agansit one another. but when I export the graphic as an image, the phantom line is included. This is also the case when using a clipping mask. (image example below)
A few work around that I've used are exporting the file with Art Optimized (Super Sampling) selected in the Anti Aliasing setting. Also, manually creating a sort of ink trap around the bottom shape so that it doesn't reach the edge of the shape above it. Sometimes this becomes a painstaking task when dealing with complicated objects.
As a designer who works with screen printing i'm weary about sending the production file to the printer because of the possibility that they will not understand this glitch/setting and i'll end up with phtanom lines around objects when printed.
Any lisp routine that will remove "phantom parcels" in a drawing? They are the parcels many topics on this discussion forum have topics on, that can be selected but can't be deleted by any simple means.
The drawing is relatively new...with minimal objects in it. Just some Feature Lines and 3D Polylines. I have Sites in my drawing...but no parcels. Only thing in the sites are the feature lines. When I do a Q SELECT for the parcels it selects and highlights my feature lines, which is weird.
I created a road centerline profile and corridor and then created a profile of the two curb lines from the corridor. The road profile that I made has a vertical curve in it but the curb profiles do not show that information, just grade breaks every 25 feet based on the corridor sampling distance.
I would like to have the vertical curve information on the curb profiles.
I have a client that is requesting a high resolution pdf for the purpose of sending to a graphic specialist to be made into a sign for a subdivision.
i am using civil 3d 2012 on windows 7, 64 bit.
using pdf995 and/or dwg to pdf as my driver, the only way i can get it to deliver a high-res graphic file is to have it produce an extremely tiny area, which, when blown up to the 4' x 8' size for the sign, gets even worse than the 72 dpi it gave me in the first place. Where i can get a driver to have autoCAD print a drawing to pdf at higher resolutions? Or, how to get autoCAD's default pdf creator to produce higher res?
All, I have created a drawing with cross sections. When I open the drawing the material table shows up below the section view instead of where I placed it. If I update the group the tables go back to where they should be. The problem is when I publish them using SSM the tables show up below the view , where they are when I open the drawing. It would be very time consuming to plot each sheet individually.
Civil 3D 2013 HP Z400 Workstation 6GB of RAM 296GB HDD ATI FirePro V5700(FireGL) Win 7 Home Professional
I have a situatuion where I have some parts in an assembly that have been set to BOM Structure Phantom, (I didn't use Reference due tho the display issues with Reference parts in the idw. ie, portions not showing as hidden when they should) I need all parts that are set as Phantom to display in a different color in the idw. How I can assign the Phantom parts to a different layer? These are existing parts of the install and need to be displayed differently. Seems like Phantom would work best, if I could control the color of the display in the idw. I cannot do this line by line, since there will be many parts all the time!
I am using autocad 2011 (first time using it). I have a line that is drawn at an angle, but i want to show the gradient of the line in 1 in x terms is this possible .
I have been given a basic autocad drawing to work over but whenever I start drawing a line starting from one of the existing lines, no dimensions or details appear for the line I am drawing. However, when I start drawing a new line not conected to the existing drawing it is normal.
I am attempting to use VBA in Acad 2007 to renumber a series of text objects based on their relative positions. (The text is numerals only.) The programs works well at first, but if I erase some of the text objects, it crashes. I noticed that if I start with 20 text objects in the drawing, and then erase 1, AutoCad reports 19 objects selected while ssetObj.Count is still equal to 20. Apparently the erased objects are still being returned by ssetObj.SelectOnScreen. To make sure I ran the example from a new drawing with only the text objects.
I am using Autocad LT 2013 and Autocad Architecture withing the same office. When I open a file that has an Xref from Autocad Architecture with 3D walls in Autocad LT, the walls only show as 1 line instead of 2. If I open the orginal file that the Xref came from, with Autocad LT the walls show up just fine (as blocks instead of 3d walls as I expected). I am hoping to be able to veiw the Xrefs correctly in Autocad LT.
As you see in the picture, the word Kitchen appears fine but the red line is where the dimension of the table top is supposed to be. It should show 6999.820mm or something , but it just displays a red line.
I just started learning AutoCAD 2010 through some videos and I came across this problem, how to rectify.
I changed my Units to mm, changed it before drawing.
We are experiencing an almost virus-like situation with some of our dwg files. Massive file sizes that grow exponentially - even with very few entities and no xrefernces. Said files also have issues with copy-to-clipboard and paste from one dwg file to the next: objects do not paste, but dozens of sequentailly named phantom blocks are generated.
After doing some searching around we feel this is occurring when clients send us files exported from microstation.
For some reason my line type is not showing up properly in my viewport. In model space my lines are dotted, but when I go to viewport they show up continuous??
A plotting issue that has never been addressed perplexes me! When working in a paperspace layout and trying to plot or print by window or display, I get a partial print or nothing at all. Typically, I will get a partial print showing the drawing above a diagonal line. This has plagued me through many versions of Autocad.
I am looking to draw my pipe with a thicker appearance than the typical line of width "0". Our storm pipes are usually drawn with this so as to stand out from other utilities. If the pipe is represented by a polyline, I have usually adjusted the "Width" or "Global Width" value to my liking. With pipe objects, it seems more complicated. I have searched the settings, and the closest thing that I could find was the Lineweight property, but that appears to have no effect on the line thickness in the CAD drawing.
Do I need to tweak a plot setting? Make a new linetype altogether?
I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
I have a line or a pline segment and i want to start a line from a point laying there and go perpendicular outwards. Is there a way to do it with tracking?
Yes, i saw the command draw line at an angle but i find it a little bit complicated for a simple task like that. I am sure autodesk have a simplest solution about that.
If i am already at the draw line mode and i can easy catch the tracking perpendicular to previous segment but if i want to start from another line and go perpendicular i cannot make the tracking work.
I have feature line with elevations that represents bottom of ditch and want to go UP 3:1 slope. also i have edge of road feature line that is higher than ditch and want to go 2% down until it hits side of the ditch that is 3:1. Any easiest way in civil 3d to create intersection line between ditch bottom going up 3:1 and edge of road going down 2%?
I seem to be having trouble changing the lineweight of my profile line. I have changed the line weight in the layer properties, in the Profile properties and tried changed the line weight in the pen style. Everywhere I could think I try to make the line thicker but when I plot, the line is still the same and difficult to distinguish from the grid blocks of the profile view.
I have created an easement after I selected the line callouts and created my parcel table I realized I missed selecting one of my line labels and it is missing from my table. I know I can just erase the table and then reselect all line callouts to create a NEW table, but I was wondering if there was a way to just select the line callout I missed and have it added to the parcel table without recreating a new one.
We have two drafting assistants using LT 2010, with Windows XP. One is assigned to do record plotting, and uses our company standard .ctb file without any problems.
The second LT 2010 user has now been assigned to assist with record plotting. However, lineweights are plotting out about half the width of the specified .ctb file. We have double-checked all the ACAD LT & Windows plot settings, and they are identical for both drafting assistants.
Is there a system variable or other setting that I am missing?
Inventor RS 2011 AutoCAD Mechanical 2011 ASD 2013 Vault Collaboration 2011 Windows 7 Pro
The plots will not fit on the desired page correctly at large scale i.e sheets over A3 ! The preview even displays incorrectly i.e portrait only. All I want to do is print a dwg in landscape but it keep only printing half the page (The white sheet is always portrait) but the information is landscape !
I have an issue with ACAD 2010 where I import jpg shots into the drawing - often a google sketch up wireframe lightened image underneath my drawing - but when I go to plot a pdf, it shows in the print preview, but when the plot is completed, the sketchup image is not shown.
