AutoCAD Civil 3D :: Vertical Curve Information Not Showing Up On Profile Created From Corridor Line?

Aug 9, 2012

I created a road centerline profile and corridor and then created a profile of the two curb lines from the corridor. The road profile that I made has a vertical curve in it but the curb profiles do not show that information, just grade breaks every 25 feet based on the corridor sampling distance.

I would like to have the vertical curve information on the curb profiles.

View 3 Replies


ADVERTISEMENT

AutoCAD Civil 3D :: Vertical Circular Curve On Profile

Nov 12, 2012

Seems like a bug on Autocad Civil 3D 2013. I followed all the tutorials to design a circular vertical curve on a profile and it just dont work. I put circular on settings, click on circular curve by PVI button, the software even ask the radius and it end up designing a parabolic curve.

View 2 Replies View Related

AutoCAD Civil 3D :: Vertical Curve Labels On Profile?

Jan 11, 2013

I just created a profile by choosing my PVIs and linking them together with tangent curves.  How do I add labels to show the vertical curve properties (K value, curve length, station of PVI, elevation of PVI...)?  I'm guessing I have to edit the label style? 

View 2 Replies View Related

AutoCAD Civil 3D :: Add Vertical Curve Between New Profile And Existing One?

Dec 17, 2013

I am working on a corridor. I have a proposal profile, and now i wanted to add a vertial curve between the new profile and exsiting. (see attached.) but i have not done before.

View 4 Replies View Related

AutoCAD Civil 3D :: Vertical Curve Adjustments In Profile Labels?

May 7, 2013

On our road profiles, we have to show that low points and high points are adjusted to maintain a minimum of 0.6%.  see attached screen shot.  Currently, I am calculating the adjusted low point and editing the profile label. Since I can't figure out how to edit one label in a data band, I've been wiping out the old elevation and typing in the new elevation over it.

Is there a way to get C3D to do the calculation for me and populate the labels with the adjusted elevation?

Civil3D 2013
Windows 7

View 1 Replies View Related

AutoCAD Civil 3D :: Profile Parabolic Vertical Curve Not Appearing Smooth

Aug 19, 2013

I'm creating finished roadway profiles by setting the PVIs then going back and inserting vertical curves (Free Vertical Parabola, PVI Based).  When I insert the vertical curve, it displays as 1-5 tangents depending on length (not a smooth parabola). I've changed the curve tessellation distance under the Edit Profile Style - Design tab, but it doesn't smooth it out.  What am I missing here.  I don't have this problem in other drawings and I'm using the same template/drawing settings.

View 2 Replies View Related

AutoCAD Civil 3D :: Profile Vertical Curve Labels Shift Down When Publishing?

Jul 3, 2013

I have a large scale industrial project with multiple road profiles and sections sheets.  I find that when I plot my drawings manually by opening the drawing everything comes out fine.  But when I publish the drawings manually or thru Sheet Set Manager, it shifts my vertical curve labels on my profiles down, which then conflicts with the profile linework (see attached image). Unfortunately manually plotting these drawings is not an option. Because of the amount of information in each drawing it takes 3-4 mins to open and we have 200+ drawings in a single set of drawings, which we have multiple sets of drawings for the project.

View 2 Replies View Related

AutoCAD Civil 3D :: Vertical Cure Data Not Showing On Super Imposed Profile

Jan 14, 2013

Im currently having problems with my profiles showing vertical curve data on a superimposed profile. The data shows on the normal profile however when i superimpose it to another profile i cant get the program to show it. 

View 4 Replies View Related

AutoCAD Civil 3D :: Created Sheet Does Not Show Vertical Alignment Data (Line And Curves)

Sep 15, 2013

i  have an issue in with my created sheets that does not show vertical alignment data. everything on the bands shows up nicely but the lines, curves and labels profile are missin.

see the attached image. you can notice from the image that there is no a signle data..

View 5 Replies View Related

AutoCad :: Vertical Curve At Profile Exaggeration

Jul 24, 2012

I'm using 2004 and drawing a profile for a utility. I need a 25' radius for my vertical curve for this utility line. I'm wondering how people draw this radius if there is a vertical exaggeration in the profile. Horizontal scale is 1"=20' and Vertical scale is 1"=5'.

View 9 Replies View Related

AutoCAD Civil 3D :: Add Contour Information To Corridor

Jan 10, 2014

I created a corridor utilizing a profile, assembly and alignment.  Worked well.  I then created a surface from that corridor.  The surface type should be displaying contours, but I do not see any.  What am I doing wrong?  The corridor display shows it covering the area that it should cover.

I did this once before and I had trouble with it that time as well.  I remember the fix had something to do with adding code data from the corridor to the surface.  I used a "+" button, but now have no idea where I did this at.

View 1 Replies View Related

AutoCAD Civil 3D :: Created Profile From File But Cannot Create Profile Report

Jan 17, 2012

I am working C3D 2012.  I have a proposed alignment and profile design by another firm that I had to tranfer into C3D.    I had no problem getting the horizontal alignment to display from a text file.  I tried to do the same with the profile by using the 'create a text file and create the profile from file' command.  I got the POB, PI's, and POE to display.  I then defined the VC.  I wanted to verifiy that the profile was indeed accurate compared to what we were provided.  So I tried to execute a profile report PVI Station and Curve Report - I keep getting an error that "No FG profiles in dwg".

I know the Proposed profile is indeed set to proposed in the properties.  I have noticed that the icon next to the profile I create from the text file is different than the profiles created from scratch.

Is there a way to convert this profile to be recognized as a FG profile?

Intel Core i5-2500K CPU @ 3.30 GHz
8.00 GB
64-bit

View 9 Replies View Related

AutoCAD Civil 3D :: Corridor Surface Ignoring Vertical Link?

Nov 6, 2013

For some reason the surface created by my corridor is ignoring the vertical link on the edge of the subassembly.  How can I get it to include that?

View 4 Replies View Related

AutoCAD Civil 3D :: Corridor Section Editor Vertical Exaggeration

Apr 30, 2013

Is it possible to adjust the vertical exageration of the section view in the corridor section editor?

View 1 Replies View Related

AutoCAD Civil 3D :: Vertical Curve (r) Value

Jun 21, 2013

I need to add the "r" value to the vertical curve labels in the profile (|G2-G1| / L).

Is there a way to add this property to the text component editor?  I see a lot of different components listed, but no "r" value.

View 5 Replies View Related

AutoCAD Civil 3D :: Vertical Curve Labels

Apr 8, 2012

I am having a lot of problems with my vertical curve labels. I created a style that shows the length of the vertical curve, the k-value, the end and start elevations, and the elevation and station of the PVI, as shown. My problems are the fact that when I want to flip a label, they all flip (shown in the second picture). I also have noticed that there is only one drag point. Is this a setting that I unknowingly edited, or is it possible to flip labels individually?

View 9 Replies View Related

AutoCAD Civil 3D :: Adding PVI With Vertical Curve?

Oct 14, 2010

In this moment I am trying to add to my profile line a PVI -which I know how to do it- with the capability of modify the criteria for the vertical curve. In this moment every time that I add a PVI the tangents do not have a vertical curve and if I open the Panorama Profile Grade View Window it does not allow me to change either the length or radius so their values in these cells are empty.

How is possible then to edit -create- the vertical curve for a PVI that was not created in the first shoot?

View 5 Replies View Related

AutoCAD Civil 3D :: Station Labels On Vertical Curve

Oct 23, 2012

I have two different label styles set up under Profile > Label Styles > Major Station.

I would like to have one of these labels applied to tangents in my profile and a the other one to curves.

View 9 Replies View Related

AutoCAD Civil 3D :: PVI Remains After Creating Vertical Curve

May 16, 2013

I have a profile view of a street surface which transitions from a 2.75% grade to -0.52%. I would like to add a vertical curve so I can add a label at the high point of the street. However when I create my vertical curve, the original PVI is still there and the surface uses the PVI's elevation rather than the vertical curve's.

How can I get the PVI to either go away or have the surface read the vertical curve below the PVI?

View 5 Replies View Related

AutoCAD Civil 3D :: Vertical Curve For Pipe Network?

Sep 1, 2011

I want to draw a water pipe network and i wanted to be 1.6 meter under the ground level. How to mange this my pipe network is PE material. I try to copy the profile and offset to -1,6 but i want to use the option of create pipe network and produce it in the profile view but how can i make the network follow the ground level profile ????

I need to add vertical curve to the network or something similar? Can i divide the pipes in the profile view by adding the structures direct to profile view.

View 9 Replies View Related

AutoCAD Civil 3D :: Reverse Vertical Curve Label?

May 9, 2012

handle a PRVC label? Right now I have the PVC and PVT labels on top of each other. Is there a nice solutioon other than making a new label style?

Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0

View 2 Replies View Related

AutoCAD Civil 3D :: How Length Of Vertical Curve Is Calculated

Jul 28, 2013

How the length of the vertical curve is calculated in the C3D?

I’m wondering regarding the equation used to calculate the length of the vertical curve.

Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.

View 9 Replies View Related

AutoCAD Civil 3D :: Draw Corridor Corners With 90 Angle No Curve

Sep 17, 2013

I am trying to figure out how to draw a 90 angle bend with no curves. With smooth outer line.

View 3 Replies View Related

AutoCAD Civil 3D :: Proposed Profile And Existing Surface Not Showing In Profile

Jun 17, 2013

I have a profile showing proposed storm sewer, existing sanitary, rock surface, existing surface, and proposed profile. Today for some reason the proposed profile and labels, and the existing surface are not showing on the profile and I'm not sure what has changed or how to get them back.

View 3 Replies View Related

AutoCAD Civil 3D :: Vertical Curve Label Not Displaying In Sheet Set

Mar 5, 2013

I am having an issue with my label displaying in my profile after I create my plan and profile sheet set. The PVC, PVI and PVT all show up, but the labels are not displaying. I looked through the layers and they are all thawed.

View 7 Replies View Related

AutoCAD Civil 3D :: Offset Alignments Vertical Curve Errors?

Jun 3, 2013

I have centreline alginement and have used the offset alginemnt command to get other alignments for other surfaces (need these as they have all different crossfalls). Now as o go along I reference the veritical profile of  the new alignement (created via offset) to my previous surface. Each time i do this the vertical profile does not seem to match my original profile of the centreline alignment.  Now as i have about 6 offsets and as i move along these error seems to grow even bigger. how this is avoidable or if this is output is unavoidable

View 5 Replies View Related

AutoCAD Civil 3D :: Showing Profile Elevation Differences Right Above Profile 2

Jul 17, 2012

differences in elevations of points along Profile 2 (the proposed new road elevation) and Profile 1 (the existing elevation/surface) should be computed and shown right above the Profile 2 line. For example, if at a certain point PT 1 the elevation of the proposed road is 132.44 meters and the elevation of the existing surface is 132.45 meters, the difference is -0.01 meters and it should be shown exactly above the Profile 2 line (or a little bit above it) but not on it. The same should be done for every chosen point along the proposed profile.

So far, I have done this manually, by dragging the difference (already automatically computed and shown in one of the bands below the profiles) to the correct place for every single point. However, I don't know how to do this automatically.

View 6 Replies View Related

AutoCAD Civil 3D :: Profile From Corridor

Jan 11, 2013

I only get 2 choices when selecting corridor feature line to create profile - ETW_base, and ETW_sub.  My Subassembly has 2 pavement sections, a base and subbase section.   I need the top of pavement profile. 

View 2 Replies View Related

AutoCAD Civil 3D :: Sub-assembly Not Showing In Corridor?

Mar 25, 2013

I have created a corridor of an exit ramp.  Part way through the corridor, the left side slope isn't generated.

The subgrade doesn't exist.  In the Sideslope to no side slope.png image that the corridor has a side slope and ditch at 10+600.  Also in the 10+600.png image.  But at 10+610 there is no side slope.  There is OG surface out far enough, but it seems that in the 10+610.png image that there isn't enough OG surface.   Orignally there was survey data missing in this area and it was added after the fact to the OG surface.  Why doesn't the corridor recognize it, if that is the case.  I have updated and syncronized the heck out of everything, but it still doesn't seem to work.

I should point out that this is in meters (the cross sections are 10m apart) and that it is the same Assembly being used for this area.  Also all targets are consistant through this area as well.

View 2 Replies View Related

AutoCAD Civil 3D :: Corridor Created Using A Primary Road Full Section As Assembly

Jan 31, 2013

I am using C3D 2013, I have a corridor created using a Primary Road Full Section as my assembly, I have all the slopes and ditching set, when I go to model the corridor the ditching is not showing correctly, only small sections of the ditching are showing when I know there should be more. I have the assembly setup to build the ditching when there is less than a meter fill, but will not work.

View 3 Replies View Related

AutoCAD Civil 3D :: Profile And Corridor Design

Jan 8, 2014

I need to design a project but ı cant..ı have two profiles in use for one alignment..ı want to use left profile for left side, use right profile for right side.and ı want to draw cross section only one..how can ı design like this project..

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved