AutoCAD Civil 3D :: Sub-assembly Not Showing In Corridor?
Mar 25, 2013
I have created a corridor of an exit ramp. Part way through the corridor, the left side slope isn't generated.
The subgrade doesn't exist. In the Sideslope to no side slope.png image that the corridor has a side slope and ditch at 10+600. Also in the 10+600.png image. But at 10+610 there is no side slope. There is OG surface out far enough, but it seems that in the 10+610.png image that there isn't enough OG surface. Orignally there was survey data missing in this area and it was added after the fact to the OG surface. Why doesn't the corridor recognize it, if that is the case. I have updated and syncronized the heck out of everything, but it still doesn't seem to work.
I should point out that this is in meters (the cross sections are 10m apart) and that it is the same Assembly being used for this area. Also all targets are consistant through this area as well.
View 2 Replies
ADVERTISEMENT
Aug 13, 2013
I've been working on a proposed ditch relocation.
I made an alignment, profile, build an assembly with it's constraints (2:1 until a certain elevation and then 3:1 to the existing ground), and made a surface from that corridor.
Now i wanted to know this : How do i generate a polyline with the assembly information ?
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
View 1 Replies
View Related
Nov 14, 2013
I am creating a corridor with a simple assembly. On my assembly, I have basic lane and daylight Multiple surface. My target is existing ground.
View 9 Replies
View Related
Oct 17, 2012
I want to add different assemblies (some with walls or ditches) along the same corridor at given stations
Can that be done?
View 4 Replies
View Related
Sep 3, 2012
1. Attached is a file , when opened show two viewports. the plan view look OK , but the ortho on the right show a corridor not near elev. Of the the alignment and the surface is missing ( I cannot get to the object viewer to show me the model setting) .
Am I in big trouble and had to create a surface again?
2. The end of this corridor you have lines all over the place , I probably need to create a corridor surface , correct?
3. Why is the alignment so far from the corridor model?
View 1 Replies
View Related
May 8, 2012
I'm trying to successfully get through a corridor, but to no avail. I'm certain I'm missing a step, and I'm certain that the step I'm missing is setting a surface to daylight to.
My project: It's a simple grassed waterway in a parabolic shape that is ran on a proposed profile grade up a draw. As you can see in the screen shots, it should daylight to the surface on each side. You can also see that the majority of the profile is deeper than the assembly is tall, so I should have a corridor that daylights on each side with a gradual cut up to the surface.
I profiled the centerline with offsets. I need the offsets to see how deep to lay the proposed centerline in regards to how deep my waterway will be. I get a bunch of error messages when I run the coridor, and they all deal with the offsets.
View 4 Replies
View Related
Aug 8, 2012
I am doing public works type project. A simple road widening project. I created an alignment, surface, profile view and basic road assembly (from tool palettes) and corridor.
I created a corridor and referenced it to my "profile view", "alignment" and to "basic road" assembly. When I created section views, it shows only existing grade based on the surface and the basic road assembly is not showing on my sections. I can't figure out how to do it.
View 4 Replies
View Related
Dec 20, 2013
how to create corridor, and I have a question about assembly elevation targets.
When creating a corridor, the profile is required as dependent object, which gives the elevation of the centerline of the road. Based on the definition of assembly, the elevation of the corridor at the offset targets can be determined by the profile. My question is if the assembly elevation target specifies the elevation at the offset target too? If so, why both profile and assembly elevation target are required?
View 6 Replies
View Related
Jul 30, 2012
I have a corridor with two baselines, one on the south side of the road, and one on the north side. The south baseline appears correctly in the section view. It is an asphalt bike trail with a ditch to the left side. The north baseline was not appearing at all. The assembly was just a ditch with nothing else. I changed the north baseline to use the same assembly as the south to troubleshoot. The pavement comes in, but the ditch still does not appear.
I can see the ditch feature lines on my corridor (see attached), but they are not appearing in the section view.
View 1 Replies
View Related
May 11, 2012
Is there a way to show a corridor assembly in a crossing profile in c3d 2012? I have a underground duct bank that I have modeled using a simple corridor. Now I want to have the duct bank assembly show up in another profile that crosses the ductbank corridror. I can't really create a surface fom the corridor since the duct bank a closed polygon. BTW, The subassembly for the duct bank was created from a polygon, if that is any useful info.
View 6 Replies
View Related
Mar 3, 2012
I am trying to build a corridor using a conditional slope assembly that considers the roadway and links into the lots.
The corridor is divided into 3 regions. All targeting has been assigned.
The first region appears fine. The second and third show no links beyond the roadway.
View 6 Replies
View Related
Jul 24, 2012
I have created a proposed centerline along my existing roadway, which represents along my profile. I have created an assembly for my proposed raod with a crown, and a 2% cross-fall in each direction.
But when I generate my sections, all my proposed assemblies show up in the proper location on my section views, except there is no cross-fall showing on any of them? They are all being shown in my sections as dead flat! 0%? I've been looking for a setting to change this.? I have also deleted, and recreated my corridors and regenerate my sections, only to get the same results!
View 7 Replies
View Related
Mar 4, 2013
I have a corridor split and I do not need an assembly for the first part of my corridor do I create a blank assembly for that part of the design?
View 1 Replies
View Related
Mar 19, 2013
The FG was created from the corridor.
The cross sections show the EG, FG and Corridor. Yet the Corridor is NOT ON the FG surface.
This is only happening on one section (0+20). The other sections look good.
View 8 Replies
View Related
Jul 9, 2012
Here's my assembly :
and
when I tried to assign the Median Width in my corridor to a polyline representing media width,
I got this overlap in my Section view :
how can I maintain Objects in this cause "Lanes" attached to median no matter width change ?
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
View 1 Replies
View Related
Oct 21, 2012
I've attach a profile of a corridor.
I don't know how to turnoff the assembly points .
I may send another inquiry after this it has to with corridor surface and boundaries.
View 1 Replies
View Related
Dec 13, 2012
I did a user defined super for my road. This worked well. However when I deleted the super data. To try something else. The corridor shows 0% camber or crossfall. How do I get the corridor to follow the default crossfall in the assembly again?
View 1 Replies
View Related
Nov 20, 2013
When I paste the proposed surface with the corriodor surface and I check the profile the proposed surface ties to the bottom of the kerb ignoring the footpath.Also in the same drawing file I can't seem to export it to ACAD.
View 1 Replies
View Related
Jan 31, 2013
I am using C3D 2013, I have a corridor created using a Primary Road Full Section as my assembly, I have all the slopes and ditching set, when I go to model the corridor the ditching is not showing correctly, only small sections of the ditching are showing when I know there should be more. I have the assembly setup to build the ditching when there is less than a meter fill, but will not work.
View 3 Replies
View Related
Aug 9, 2012
I created a road centerline profile and corridor and then created a profile of the two curb lines from the corridor. The road profile that I made has a vertical curve in it but the curb profiles do not show that information, just grade breaks every 25 feet based on the corridor sampling distance.
I would like to have the vertical curve information on the curb profiles.
View 3 Replies
View Related
Jul 19, 2012
For some reason I cant seem to target an offset alignment layout profile with my corridor lane assembly. I can target the existing the existing groundprofile with the same offset alignment, but the layout profile when targetted does not change the lane in my cross sections. I can do this with civil 3d 2010, but not 2012. I have tried other lane sub-assemblies and it doesn't make a difference.
View 9 Replies
View Related
Aug 1, 2013
I can’t seem to manage to get the profile working, the assembly seems to look ok but it doesn’t show on the profile!
The assembly just follows the line of existing ground and does not show the height of the assembly (barrier). Also, if you take a quick section through the alignment/corridor it shows the assembly but doesn’t show it fully?
View 6 Replies
View Related
Jan 21, 2013
I have everything needed for plotting of cross sections. Alignment, profile, assembly.
The "Corridor Section Editor" shows everything as it should be. Existing Ground, Final Grade, Labeling, etc. When "Create Multiple Views" or "Create Section View" only existing Ground shows. All layers are on.
View 3 Replies
View Related
May 16, 2013
I have created section views of my allignment and corridor in my drawing the problem I have is. In some of the section views there is different parts of the different assemblies not showing up. For example in one section I have my lane then my curb then no sidewalk then blvd. It is not the same in each section view either some are missing one thing while others are missing others.
View 1 Replies
View Related
Jun 14, 2012
I have created several different corridors (with different assemblies in them), but when I to to view sections the same assembly keeps showing up. How do the sections get updated with the new assemblies?
View 4 Replies
View Related
Sep 14, 2012
I have created a surface from a corridor. I set the boundary of the surface to the daylight of the corridor. In some areas of the corridor the surface does not triangulate see attached.
View 2 Replies
View Related
Dec 13, 2012
Copy a corridor successfully? I'd like to try this just a little worried about the explosion of evil this may cause to my Civil 3D session.
Even all the properties of the corridor setup from one to another would be useful. I'm building one corridor and an 2nd one that matches everything except I need to replace my Assembly with one meant for stripping.
View 9 Replies
View Related
Mar 21, 2013
My corridor surface is not matching my corridor top links. see attachments. this is affecting my volumes!
The section-plan(surface red).png is showing the section editor and the plan view. the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.
The pdf is all my sections with the red linework being the corridor surface.
C3D ver 2012
Win 7, 64bit
View 2 Replies
View Related
Jul 11, 2013
I thought I created a rail sub assembly.
So I created the rail sub assembly everything looks great in sub assembly composer.
Start a new dwg data reference in the rail alignment, Note the rail alignment type is set to rail.
Create an assembly and under the Construction tab for the assembly the Assembly Type is set to Railway. Attach my custom sub assembly to this assembly.
Created a corridor and I get this error: Something wrong with current subassembly: Operation is not valid due to the current state of the object.
So I delete my sub assembly attach the Civil 3D Rail Single sub assembly. Re run corridor and everything works fine.
So I promote the alignment change type to centerline. Delete the Rail Single sub assembly put my rail sub assembly back. Rerun the corridor and everything works.
So then I undo everything up to the point of promoting the alignment.
Opened the base file changed the alignment type to centerline.
When I tried to synchronize the references I ended up a broken reference with the following error. Invalid reference. Synchronization failed
Not good we already have plan sheets cut.
where in sub assembly composer were do I define the sub assembly to be for Rail?
View 2 Replies
View Related
Oct 15, 2013
I am using Inventor 2014. I have a sketch on a part that does not show up when I put the part into an assembly. Any way to make the sketch show up in the assembly? It is a 3d sketch that is projected to a surface.
View 1 Replies
View Related
Jun 14, 2012
At one time I managed to divine a way of showing parts in an assembly drawing in phantom. This is characterized by the icon for the part in the browser changing to green colour. Being elderly, I have forgotten how I managed to do this.
View 8 Replies
View Related
