AutoCAD Civil 3D :: Showing Corridor Assemblies In Crossing Profiles
May 11, 2012
Is there a way to show a corridor assembly in a crossing profile in c3d 2012? I have a underground duct bank that I have modeled using a simple corridor. Now I want to have the duct bank assembly show up in another profile that crosses the ductbank corridror. I can't really create a surface fom the corridor since the duct bank a closed polygon. BTW, The subassembly for the duct bank was created from a polygon, if that is any useful info.
View 6 Replies
ADVERTISEMENT
Mar 27, 2012
We are starting a new job, and looking how to setup our drawings. We have a long corridor that we are upgrading, and along this corridor, we have various water course passing through. We are replacing the existing culverts. They are large circular culverts. How do we show the culverts on our model? Do I create a short pipe network for each culvert crossing? And also, how do I daylight to the outside of the culvert as the corridor crosses over it?
View 4 Replies
View Related
Jan 24, 2013
I'm looking for solution for this error: Mask '0' NOT added to corridor surface 'Corridor - (1) - (1)' as boundary due to crossing polygon.
View 6 Replies
View Related
Aug 17, 2012
I have a corridor with multiple assemblies along a 4 mile stretch of road. In certain locations the corridor is not not modeling the sidewalk. I checked all the targets and everything is good.
View 1 Replies
View Related
Aug 27, 2013
I have a corridor with multiple baselines and assemblies (not offset assemblies, but different baselines and assemblies).
I am trying to link them together with the LinkToMarkedPoint2 subassembly. From what I have read, this should be possible with this command, but I am getting no links. Am I wrong about the capabilities of this subassembly?
View 6 Replies
View Related
Sep 25, 2012
I created a base drawing for sections that references an alignment. I xrefed in the drawing where my corridor was created. When I create the section views, the corridor shows up perfectly.
I then created a blank sheet and xrefed in my section view base drawing.In this sheet drawing, only parts of the corridors are visible.I have a C&G on one assembly and a shoulder on another assembly that aren't visible. (see pics)The first pic is my section base drawing.
View 3 Replies
View Related
Jan 7, 2014
I am creating a corridor with custom assemblies on two alignments. the alignments are not parallel and graded independently.
Between the two assemblies I would like to fill from one assembly to the other with a dynamic link. I can't do this as a target to featureline etc as it is within the same corridor. We have created the link with a target but this was done by creating a non-dynamic featureline from the corridor and using that as the target. This is obviously not great as far as keeping the corridor dnamic is concerned.
So I would like to customise a subassembly to allow it to target a marked point on an adjacent assembly.how the SAC tools (Get marked poinit or set marked point etc.) can be used to do this. The help file is less than useful. I am still on 2012 and dont have access to the 2014 SAC yet but will do shortly.
View 4 Replies
View Related
Mar 25, 2013
I have created a corridor of an exit ramp. Part way through the corridor, the left side slope isn't generated.
The subgrade doesn't exist. In the Sideslope to no side slope.png image that the corridor has a side slope and ditch at 10+600. Also in the 10+600.png image. But at 10+610 there is no side slope. There is OG surface out far enough, but it seems that in the 10+610.png image that there isn't enough OG surface. Orignally there was survey data missing in this area and it was added after the fact to the OG surface. Why doesn't the corridor recognize it, if that is the case. I have updated and syncronized the heck out of everything, but it still doesn't seem to work.
I should point out that this is in meters (the cross sections are 10m apart) and that it is the same Assembly being used for this area. Also all targets are consistant through this area as well.
View 2 Replies
View Related
Nov 2, 2012
Existing surface profiles not showing in xref. Constantly have to reload xref for profile to show. Even on opening drawing, reloading xref is required.
Civil3D 2013
Windows 7, 64 bit
Intel i7 2600 @ 3.40Ghz
16 GB RAM
Nvidia Quadro 600
View 2 Replies
View Related
Jul 30, 2012
I have a corridor with two baselines, one on the south side of the road, and one on the north side. The south baseline appears correctly in the section view. It is an asphalt bike trail with a ditch to the left side. The north baseline was not appearing at all. The assembly was just a ditch with nothing else. I changed the north baseline to use the same assembly as the south to troubleshoot. The pavement comes in, but the ditch still does not appear.
I can see the ditch feature lines on my corridor (see attached), but they are not appearing in the section view.
View 1 Replies
View Related
Aug 13, 2013
I've been working on a proposed ditch relocation.
I made an alignment, profile, build an assembly with it's constraints (2:1 until a certain elevation and then 3:1 to the existing ground), and made a surface from that corridor.
Now i wanted to know this : How do i generate a polyline with the assembly information ?
Using : Autodesk Civil 3D 2012
OS : Windows 7 - 64 bit pro
View 1 Replies
View Related
Mar 19, 2013
The FG was created from the corridor.
The cross sections show the EG, FG and Corridor. Yet the Corridor is NOT ON the FG surface.
This is only happening on one section (0+20). The other sections look good.
View 8 Replies
View Related
Aug 9, 2012
I created a road centerline profile and corridor and then created a profile of the two curb lines from the corridor. The road profile that I made has a vertical curve in it but the curb profiles do not show that information, just grade breaks every 25 feet based on the corridor sampling distance.
I would like to have the vertical curve information on the curb profiles.
View 3 Replies
View Related
Jul 20, 2012
I'm trying to use assemblies when creating a corridor. The Tool Pallette is emply but I can drag the assembiles in from the Catalog. I've also created an assembly using the ASC. Neither work when I try to use them. The error message is attached.
I'm using a network installation and I do not have the option of changing it to a DVD installation.
View 2 Replies
View Related
Sep 14, 2012
I have created a surface from a corridor. I set the boundary of the surface to the daylight of the corridor. In some areas of the corridor the surface does not triangulate see attached.
View 2 Replies
View Related
Dec 13, 2012
Copy a corridor successfully? I'd like to try this just a little worried about the explosion of evil this may cause to my Civil 3D session.
Even all the properties of the corridor setup from one to another would be useful. I'm building one corridor and an 2nd one that matches everything except I need to replace my Assembly with one meant for stripping.
View 9 Replies
View Related
Mar 21, 2013
My corridor surface is not matching my corridor top links. see attachments. this is affecting my volumes!
The section-plan(surface red).png is showing the section editor and the plan view. the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.
The pdf is all my sections with the red linework being the corridor surface.
C3D ver 2012
Win 7, 64bit
View 2 Replies
View Related
Nov 14, 2012
I am having some issues with surface profiles on a dreffed alignment no updating dynamically.
Currently it requires me to set them to static, then back to dynamic and they update.
I am well aware of the issue of dreffed surface profiles staying static. I am using the work around of dreffing in the surface and sampling in the drawing using the dreffed alignment.
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
View 1 Replies
View Related
Dec 3, 2013
I have built a alingment, corridor, and surface of a driveway but I have a few holes in my surface. I tried to add lines to my TIN surface and some filled in properly but others would not and I had TIN lines that crossed (actually they are 4 different lines that meet at on point). Why does this happen and how can I fix it?
View 4 Replies
View Related
Mar 12, 2012
I have two pipe networks and two profile views, one for storm and another for sanitary. I would like to show the crossing pipes on each of the profile views. When I select the profile view, add a pipe and change the style to crossing the style is change to crossing on the other profile view (ex. on sanitary profile view I set storm pipe 3 to crossing style, on the storm profile pipe 3 changes to crossing style and does not display). Isn't there a way to display the styles for pipes different in each profile view?
C3D 2011 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
View 3 Replies
View Related
Sep 12, 2013
It can be done using the LaneFromTaperedMedian subassembly, and that there is a webcast explaining it. I have checked with Autodesk, and the webcast is no longer available. Any detailed instructions as to how to accomplish this. I'll attach an image of my median.
Win 7 64BIT
C3D 2013
View 1 Replies
View Related
Sep 5, 2013
i've got proposed stormwater pipes crossing existing utility pipes. my proposed stormwater pipes run parallel to but offset from my road centerline alignment. i want to show the existing utility pipe as an oval where it crosses my stormwater pipe. i can get the utility to show up in the profile at the centerline alignment of my road but not at the actual point where the pipes cross. is there a way to show this?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 2 Replies
View Related
Nov 7, 2012
I have a drawing with 3D polylines that will be used to build a surface but many of them cross each other.
I would like to extract the vertices of these polylines and use this information to build the surface but can't figure out an easy way to do this.
I have tried the Points at Vertices Automatic which is ok but as there are 300 or so 3D polylines this will get very tedious very quickly - is there a better/quicker way to do this?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 9 Replies
View Related
May 7, 2013
I created this label for my pipe crossing. I want to be able to start the vertical line at the invert, and be able to move the text up and down and have the line adjust.
Currently my dragged state has the arrow head size as 0 and visibility as false, since it starts the leader at the centerline of the pipe. But without using the leader, I cannot adjust the vertical line dynamically.
View 2 Replies
View Related
May 30, 2013
Dealing with an old topo. Building a surface from a point group of points in the drawing, and 2D polyline being used as proximity breaklines.
Here is my list of events after I rebuild the surface:
So I went to use the 'Resolve Crossing breaklines' tool, and here's what that looked like:
So are there or aren't there?
When I use the 'Zoom to' feature, it takes me to the midpoint of a TIN line on a breakline, with no other objects around. Crossing window selection: only the surface and one polyline. I found one crossing breakline just by accident, not from either of these tools. After I fixed it it didn't change anything. I even deleted all the breaklines from the surface and added them again, closed drawing and reopened, no change.
View 2 Replies
View Related
Nov 7, 2007
Problems with masked crossing pipe in the profile view? So basically I want to show a manhole with three pipes attached in the profile view and I use style override for pipes in a profile view to show crossing pipe, but crossing pipe gets masked with "Enable part masking" option in the Structure style. So I either can show crossing pipe and projected pipes drafted to center of the structure, or I can see only projected pipes drafted to the structure outer walls, but cannot see crossing pipe.
I would like to see projected (incoming) pipes drafted to the structure outer wall, and crossing pipes. Is that possible? See figure attached.
View 9 Replies
View Related
Nov 6, 2013
how to do the concrete medians in civil 3d 2012 sp4?
View 2 Replies
View Related
Jul 28, 2013
I have recently started working with civil3d 2012 & 2013 so go easy one me...
How can i check the elevations of 2 alignments that cross (junction)?
The localization team in Israel has added a utility that marks the junction on the profile view with a red flag and 2 marker lines, one for the existing ground and one for the elevation of the crossing alignments. The flag is not a civil3d entity, it's not dynamic and needs to be reset after each change.
Any better way of checking the elevations? (including adding a block or anything to the profile to show the other alignment name and elevation).
View 4 Replies
View Related
Apr 16, 2012
I have a storm crossing shown on a road profile, and the ellipse that represents the storm pipe is only showing part of the inner wall (I've attached an image). This pipe is skewed slightly, but the entire pipe crosses the road alignment, and this should not make any difference.
Also, is there any way, yet, (I'm using C3D 2011) to have the label show not only the pipe name, but also the invert where the pipe crosses the road alignment, and remain dynamic,? In other words, without having to edit the label text, and lose the dynamic capability. Land Desktop would do this, but it was not dynamic, of course.
Win 7 64BIT
C3D 2013
View 7 Replies
View Related
Jun 16, 2012
I have problem with medians ( Both MedianRaisedWithCrown and MedianRaisedConstantSlope) when crossing center line ( i.e whole median has to cross the center line).
I have median that goes along the centerline and it has to move to left completely ( whole median is on left side of the centerline) to cater for left turn. I tried with MedianRaisedWithCrown and MedianRaisedConstantSlope but it did not workout for me.
I used alignment ( for cl ) and offset alignments for median edge and etw. I have problem when the median edge ( offset alignment ) cross the center line and continues. I can see etw and median feature line shifts.
View 1 Replies
View Related
Aug 13, 2013
Is it possible to label a pipe crossing offset in section view dynamically? I see there are options to label start offset and end offset, but not at the actual crossing.
View 5 Replies
View Related
