AutoCAD Civil 3D :: Storm Crossing On Road Profile View?

Apr 16, 2012

I have a storm crossing shown on a road profile, and the ellipse that represents the storm pipe is only showing part of the inner wall (I've attached an image). This pipe is skewed slightly, but the entire pipe crosses the road alignment, and this should not make any difference.

Also, is there any way, yet, (I'm using C3D 2011) to have the label show not only the pipe name, but also the invert where the pipe crosses the road alignment, and remain dynamic,? In other words, without having to edit the label text, and lose the dynamic capability. Land Desktop would do this, but it was not dynamic, of course.

Win 7 64BIT
C3D 2013

View 7 Replies


AutoCAD Civil 3D :: Storm Drain Profile View Invert Labels?

Dec 30, 2013

I've attached an image of a storm drain invert label for a storm drain profile.  As you can see, the middle manhole has all three inflow pipes labeled.  Is there a way to only label the inverts of the two pipes shown in the profile view? 

C3D 2014
Windows 7 64-bit

View 5 Replies View Related

AutoCAD Civil 3D :: Parallel Pipes And Crossing In Profile View Disappeared

Oct 8, 2013

My colleague added parallel pipe networks and crossings to multiple SD profile views yesterday.  Today, he came in, turned on AutoCAD, opened the drawing, and the parallel pipes and crossings were gone.  The working folder had reset itself to nowhere so we reset the working folder and Data Shortcuts Folder, but that didn't bring them back.  We can go into the profile view properties<pipe networks tab and turn the pipes and structures back on and override the styles, but that is basically redoing everything we did yesterday.  Is there a way to avoid having to redo everything?  Is there a way to avoid this from happening in the first place?

C3D 2013
Windows7 64 bit

View 3 Replies View Related

AutoCAD Civil 3D :: Road Intersection Label In Profile View

Apr 10, 2012

What can I do to show intersection information in a profile label?I mean, supose I have two roads (A and B)... what should I do to show in the road A vertical profile the name and the station of road B in the properly position of this A profile? URL....

View 4 Replies View Related

AutoCAD Civil 3D :: Pipe Network - Crescent Road - Profile View

Jul 30, 2011

If I have a Crescent Road (P - shape) where the Alignment returns to itself, when i draw pipe network parts in profile, the pipe network gets drawn wrong, ie. the tie-in structure at the intersection is drawn at the wrong station.

My understanding is that the structures will get drawn at the station closest perpendicularly to the alignment, so the structure is going to the end station as opposed to the beginning simply because the end segment of the alignment is closer.

Is there any way to make a structure use a different perpendicular station (without shortening the alignment)?I don't want to move alignment or structure.

View 8 Replies View Related

AutoCAD Civil 3D :: Project Crossing Pipe Onto Road Center Line

Apr 24, 2012

I need to project a crossing pipe onto a road centerline.  I have water running down one side of the road 7' off the centerline of the road and sewer running down the other 8' off the centerline.  There is storm drain running perpendicular across the road.

The sewer and the water are projected onto the centerline of road profile.  When I draw the crossing pipes in that profile view and change the override, because it does not cross the centerline, it disappears from the profile view. How can I accurately show the crossing at the proper invert of the respective crossing without drawing the ellipses manually? 

View 4 Replies View Related

AutoCAD Civil 3D :: Crossing Pipes In Profile?

Mar 12, 2012

I have two pipe networks and two profile views, one for storm and another for sanitary.  I would like to show the crossing pipes on each of the profile views.  When I select the profile view, add a pipe and change the style to crossing the style is change to crossing on the other profile view (ex. on sanitary profile view I set storm pipe 3 to crossing style, on the storm profile pipe 3 changes to crossing style and does not display).  Isn't there a way to display the styles for pipes different in each profile view?

C3D 2011 (latest updates)
Win 7 Pro, 64-bit

View 3 Replies View Related

AutoCAD Civil 3D :: Masked Crossing Pipe On Profile?

Nov 7, 2007

Problems with masked crossing pipe in the profile view? So basically I want to show a manhole with three pipes attached in the profile view and I use style override for pipes in a profile view to show crossing pipe, but crossing pipe gets masked with "Enable part masking" option in the Structure style. So I either can show crossing pipe and projected pipes drafted to center of the structure, or I can see only projected pipes drafted to the structure outer walls, but cannot see crossing pipe.

I would like to see projected (incoming) pipes drafted to the structure outer wall, and crossing pipes. Is that possible? See figure attached.

View 9 Replies View Related

AutoCAD Civil 3D :: View Looking Up Storm Pipe

Sep 3, 2013

I need creating a view up a storm pipe. We had the inside of a large diameter pipe scanned. Now I need to be able to create a view looking directly up the pipe. Is there a way to set the view so that the what I am seeing is the view from the center of the downstream end of the pipe looking to the center of the upstream end of the pipe?

View 1 Replies View Related

AutoCAD Civil 3D :: Gravity Pipe Crossing Doesn't Show Up In Profile

Dec 6, 2013

I have a typical storm sewer pipe network in a drawing by itself with an alignment.  I data referenced both of these into another drawing.  I draw the pipe network in the profile view I created and the pipes that run with the road show up fine.  Every once in awhile there is a lateral storm sewer pipe that runs across the road.  When I draw these in the profile view they show up, but, only the pipes that are skewed to the alignment show up.  If the pipe is perfectly perpendicular to the alignment it does not show up.  I have two styles setup.  One main one that shows the inner and outer pipe walls and another one for overrides for the crossing pipes and that stlye has crossing pipe walls turned on.

Why is it though only the skewed pipes show up as ellipses in my profile view but the perpendicular pipes do not?

View 2 Replies View Related

AutoCAD Civil 3D :: Hydraflow Storm Sewers - Import / Update Storm Network

Aug 21, 2013

I am having issues with importing / updating existing storm network.

The problem is when I update the storm network, All the outlets are added as new structures. It does not update the existing headwall / end sections.

I then have to go thru and delete the added (null) outlet structure. Then, reattach the existing outlets to the pipe network to show up in the structure data table correctly.

View 1 Replies View Related

AutoCAD Civil 3D :: SSA Error 537 - Unable To Perform Multiple Storm Analysis No Storm Was Selected

Nov 21, 2013

I am working on modeling a pond riser.  I had one model with a series of small round perforations in the riser and I needed to look at a version that used larger, square cut-outs in the riser.  So, I performed a "save-as" and adjusted my orifices to match my new model requirements.  When I attempted to run the model, I received the following error: "ERROR 537 : Unable to perform multiple storm analysis, no storm was selected.". 

I have encountered this one time before and was able to go back to the first model and start over.  However, now, even when I run the first model (small round perfs), I receive the same error.

I have a storm event assigned for both models but the program does not seem to recognize this any longer. 

View 3 Replies View Related

AutoCAD Civil 3D :: Structure Pipe Crossing Profile / Section Incorrectly Displayed

Jul 25, 2013

Noticed this in R2013? Not bothering to check with 2014 yet as I don't really use it.I have three vports. TL is Profile view, TR is SV and other is 3d.

There seems to be slight difference between the pipes in the profile/sections compared with the Structure pipe crossing.

All styles are set for External walls, when swapped to internal this is still incorrect. All pipes are same size & part and are Horizontal. Sections / alignment is taken along centre of pipework.

View 5 Replies View Related

AutoCAD Civil 3D :: Customizing Road Profile Output

Feb 27, 2013

I am new to Civil 3D and need to customise the look of road profiles so they look like they were produced from any of our other civil design software packages that we use (to maintain standards between offices etc).

The attached picture is what I need them to look like. I want to show both the natural ground (the dotted line) and the design road line (solid). Then I want to write on the profile the station, natural level and the design level.

I've got the Mastering Civil 3D book (and a few others) sitting on my desk.I worked out how to turn off the grid on the default profile althoguh that was about it.

View 1 Replies View Related

AutoCAD Civil 3D :: Label Pipe Crossing In Section View

Aug 13, 2013

Is it possible to label a pipe crossing offset in section view dynamically? I see there are options to label start offset and end offset, but not at the actual crossing.

View 5 Replies View Related

AutoCAD Civil 3D :: Label Style - Design Road CL Profile

Apr 9, 2010

how to create a label style for design center of road (simple tangent) in profile that will work between multiple profile views. I've used the 'Create Multiple Views' profile view wizard. I use a horizontal dimension style label for CL road (looks just like an autocad linear dimension). I'd like the label work across separate views i.e. stop at view end, pick back up at view start.

The label I currently use is simply a line component from tangent start dimension to tangent end dimension and the text component is anchored to the line midpoint. Label looks as intended for normal use. For some reason the line drops as if looking for the actual pvi at the right side when i use multiple views.

View 3 Replies View Related

AutoCAD Civil 3D :: Adjusting Intersections Secondary Road Profile

Jul 9, 2013

I went forward designing intersection profiles with limited survey and simply made an educated guess for the secondary roads pgl tie in point. I have received updated survey and when I move the profile end point to meet existing grade it adds another pvi effectively holding the profile grade I set preliminarily. I'm keeping the lock point. Is there something with the return/ offset profiles preventing this edit? What is the proper work flow?

Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS

View 3 Replies View Related

AutoCAD Civil 3D :: How To Bring In Finished Road Section On Longitudinal Profile

Sep 28, 2013

How to bring in the Finished Road Section on a longitudinal profile @ point on tie in. For example three road A, B and C are tieing in to Road X at different stations. I have profile of all the roads. and I want to change the profile of road X with reference to road A,B and C. for that I need reference road section of Road A,B and C on longitudinal profile of road X. How this can be achieved.

View 2 Replies View Related

AutoCAD Civil 3D :: Data Of Existing / Future Ground And Station On Profile Of Road

Dec 18, 2013

How to get automaticly data on the profile. See my road profile in attachment.

Now i have to manually write data of elevation of existing and future ground and distance.

i think that is possible automaticly, but i dont know how.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Insert Data Of Sample Line In Road Profile - Height And Length

Oct 21, 2013

I made an alignment of road, inserted with sample line, then i made a profile. But on the sample line on profile, there is not a data of height and lenght of profile. How to get those data in road profile. I can manually draw that, but i think there is an easier way? 

View 1 Replies View Related

AutoCAD Civil 3D :: Moving Profile View Labels With The Profile View?

Jul 20, 2012

I tried moving a Profile View and even though I selected everything at once and selected a base point and destination point, the Profile View Station and Elevation labels moved with a different offset than the Profile View itself.  ?

Civil 3D 2012

View 2 Replies View Related

AutoCAD Civil 3D :: Road Section View Grid Too Thick In Preview

May 12, 2012

I already check the setting layer assignment with color and linetype all bylayer using the office ctb BUT during preview in plotting it shows too thick. What do I miss to check or do?

View 2 Replies View Related

AutoCAD Civil 3D :: Pipe Network Storm Sewer Pipe Plan View

Nov 20, 2013

Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently.  We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.

View 1 Replies View Related

AutoCAD Civil 3D :: Model Road / Ditch Along Road

Aug 21, 2013

I need to model road with same elevation. But also need to model ditch along road which has a slope of 0.2%. how can i make a ditch with slope.

View 2 Replies View Related

3ds Max Modeling :: Civil View Yellow Road Arrows

Jul 11, 2013

3DS Max Design 2014 I am trying to get shaded Yellow road arrow markings. I added the markings to the resource kit .. (Diffuse and Opcaity using same image file)
When first used they look correct..

 then with some editing to the model and many opens later the image is replaced by a grey block

this is what it looks like in shaded viewport, but still renders correctly
we dont always have time to render to file, we capture screen video. Is there a way to fix this? to get the yellow arrow in shaded viewport - permanently.

View 2 Replies View Related

AutoCAD Civil 3D :: How To Base Structure Profile Label Location On Top Of Profile View

Nov 4, 2013

I'm working with a structure profile label style and it seems like the only way to anchor the position of the label is based on offsets from the structure itself... Any way to position the label based on the top of the profile view, so that I could make all of my labels horizontally aligned above the profile view?

View 9 Replies View Related

AutoCAD Civil 3D :: Make Curb Return Profile Without Profile View Like Intersect Command

Feb 28, 2011

I try to make curb return profile without profile view like a intersect command.

I was make curb return alignment but I can not find profile command without profile view.

View 6 Replies View Related

AutoCAD Civil 3D :: Structures In A Profile View Extending Outside The Profile

Nov 22, 2013

I have a 10 foot profile view and a 15 foot manhole. I want to show the manhole but not the bottom 5 feet. It is extending beyond my profile view.

Civil 3D 2014 SP1
Windows 7 Professional
Intel Core Quad Q9650 3.0 GHz
8 GB, 64-bit

View 7 Replies View Related

AutoCAD Civil 3D :: No Profile Is Drawn In The Profile View - Update

Jul 24, 2012

I have yet to produce a profile. I created a polyline and turned it into an alignment.

Looking at alignment Sample(3), I see that it is not superimposed over your surface. The polylines are, but the alignment is not. That will disallow creation of a surface profile.

Is the sample5 an alignment that sits on the surface? how come there is still no profile?

View 3 Replies View Related

AutoCAD Civil 3D :: Surface Profile Not Shown In Profile View

Nov 28, 2012

Attached are survey points that created the surface of a road embankment portion that caved-in. The road is very near a reservoir  shoreline. 

1. How can a surface profile be produce? I/'ve use line to change it into an alignement and then create a proile , then a profile view. But the the surface profile is missing. 

2.the points having higher elevation are the  top edge( road level) of the cave-n . A few few shots were take before the shorline elevations.

3. What the best way to come up with the rock volume to fill the cave-in given this surveying points., Also the shoreline elevation will be lowered some more while work is being done since the fill is not allowed to fall in the reservoir. 

View 2 Replies View Related

AutoCAD Civil 3D :: Edit Profile Without Having It On Profile View?

Jul 31, 2013

A tabular data sheet for profiles could be very interesting.

Civil 3D (2013)

View 9 Replies View Related

Copyrights 2005-15, All rights reserved